manual.it
American Express
User Manual for My Pet Command models including: T501 Rechargeable Remote Spray Dog Trainer 0.5 Mile 2600 ft 800M, T501, Rechargeable Remote Spray Dog Trainer 0.5 Mile 2600 ft 800M, Remote Spray Dog Trainer 0.5 Mile 2600 ft 800M, Spray Dog Trainer 0.5 Mile 2600 ft 800M, Dog Trainer 0.5 Mile 2600 ft 800M, Trainer 0.5 Mile 2600 ft 800M
My Pet Command 2600 FT Range (0.5 Mile) 4-1 Citronella Dog Training Collar with Remote, Spray,Vibrate,Tone and Night Light Functions Safe, Humane, No Shock Waterproof Rechargeable Add up to 3 Collars : Pet Supplies
File Info : application/pdf, 13 Pages, 366.04KB
DocumentDocumentwww.mypetcommand.com USA 888 686 6495 Australia 1300 416 703 UK 020 3936 1156 sales@mypetcommand.com My Pet Command 0.5 Mile/2600 ft (800M) Rechargeable Remote Spray Dog Trainer -User Manual CH www.mypetcommand.com USA 888 686 6495 Australia 1300 416 703 UK 020 3936 1156 sales@mypetcommand.com Please read this entire User Manual before beginning Table of contents Precautions Precautions 1 Precautions 2 product Description Main Features 3 Relevant description 4 Transmitter description 4 Receiver description 5 How to Use it Charging operation instruction 6 Charging requirements 6 Receiver charging state 6 Charging state of transmitter 7 Operating Instructions for Various Functions of the Product Power on-off 7 The receiver is paired with the transmitter 7 Channel switching operation mode 8 Spray function grade adjustment operation 9 Vibration function level adjustment operation 9 Tone function level adjustment operation 10 Light flicker function level adjustment operation 10 Flashlight operation 11 Friendly Tips 11 How the System Works Warm Tips & Training Guide Summary of Frequently Asked Questions FCC Compliance Declaration of conformity Reference Size for Different Dogs 13 13-16 17-19 19 20 21-22 Components Collar Receiver Wrist Strap My Pet Command 0.5 Mile/2600 ft (800M) Rechargeable Remote Spray Dog Trainer -User Manual Remote Transmitter USB Charging Cable www.mypetcommand.com USA 888 686 6495 Australia 1300 416 703 UK 020 3936 1156 sales@mypetcommand.com CH Screwdriver Please read this entire User Manual before beginning Ultrasonic Training whistle User Manual Other ltems You May Need Scissors Lighter Non-metallic collar and 10-foot leash Thank you for choosing our product. You can sync the remote transmitter and collar receiver to operate spray/vibration function to discourage your dog from unwanted behaviors and effectively train your dog at a long distance. IMPORTANT SAFETY INFORMATION Explanaon of Aenon Words and Symbols used in this User Manual This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a hazardous situation which, if not WARNING avoided, could result in death or serious injury. CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result CAUTION in minor or moderate injury. CAUTION, used without the safety alert symbol, CAUTION indicates a hazardous situation which, if not avoided, could result in harm to your pet. WARNING Not for use with aggressive dogs. Do not use this product if your dog is aggressive, or if your dog is prone to aggressive behavior. Aggressive dogs can cause severe injury and even death to their owner and others. If you are unsure whether this product is appropriate for your dog, please consult your veterinarian or certified trainer. Do not puncture or incinerate the collar or the refill cannister. Do not expose to extreme heat or store at temperatures above 113 °F or 45 °C. Lithium Rechargeable Batteries.This device contains Lithium-Polymer (Li-Polymer) batteries; never incinerate, puncture, deform, short-circuit, or charge with an inappropriate charger. Fire, explosion, property damage, or bodily harm may occur if this warning is not followed. -1- Do not expose the device to freezing temperatures (32 °F or 0 °C) or to conditions warmer than 113 °F or 45°C. Do not leave the collar in direct sunlight. Never leave the collar in a car where the device can heat up to high temperatures (113 °F or 45 °C). ·Contains gas under pressure; may explode if heated. ·Wear protective gloves / eye protection / face protection. ·Do not breathe dust / fume / gas/mist / vapors / spray. ·In case of inadequate ventilation, wear respiratory protection. ·If exposed or concerned: Get medical advice / attention. ·Protect from sunlight. Store in a well-ventilated place. Do not puncture. Do not burn. ·Keep out of reach of children. FIRST AID TREATMENT: If inhaled, get medical attention if you feel unwell. After skin contact, rinse affected area with soap and water. After eye contact, rinse/flush eyes gently using water for 15-20 minutes. CAUTION This product is not a toy. Keep it away from the reach of children. CAUTION Risk of skin damage. Please read and follow the instructions in this manual. Proper fit of the collar is important. A collar worn for too long or made too tight on the pet's neck may cause skin damage. Ranging from redness to pressure ulcers; this condition is commonly known as bed sores. ·Avoid leaving the collar on the dog for more than 12 hours per day. ·When possible, reposition the collar on the pet's neck every 1 to 2 hours. ·Check the fit to prevent excessive pressure; follow the instructions in this manual. ·Never connect a leash to the electronic collar. ·When using a separate collar for a leash, don't put pressure on the electronic collar. ·Wash the dog's neck area and the contact area of the collar weekly with a damp cloth. ·Examine the contact area daily for signs of a rash or a sore. ·If a rash or sore is found, discontinue use of the collar until the skin has healed. ·If the condition persists beyond 48 hours, see your veterinarian. -2- These steps will help keep your pet safe and comfortable.Millions of pets are comfortable while they wear smooth contacts. Some pets are sensitive to contact pressure.You may find after some time that your pet is very tolerant of the collar.If so,you may relax some of these precautions.It is important to continue daily checks of the contact area.If redness or sores are found,discontinue use until the skin has fully healed. This Remote Spray Trainer must be used only on healthy dogs. We recommend that you take your dog to a veterinarian before using the collar if he is not in good health. 2.Main Features 4 4 IN 1 Training Modes: Spray Stimulation + Vibration + Tone + LED light for Dog Searching IPX5 Rainproof Collar Receiver Expandable to a Three-Dog System 3 2 3 Innovative Painless 1 StimulationFunction, More Scientific and Humane 8 Range up to 800M / 0.5 miles dependent on open terrain environment Backlit LCD Display More Powerful Spray, More Effective Shock-Free,Safe and Harmless Built-in Rechargeable Batteries,More Environmental Friendly -3- Innovative Touch Switch to Avoid Misoperation 3.Relevant Description Transmitter description Display Level Adjustment Button Button Indicator Light Dog Finder Light Button CH Channel Switch Button Flashlight -4- Flashlight Button Spray Button Vibration Button Tone Button Charging port Receiver description Touch Switch (On/Off and Pairing) Refill Port -5- Charging port 4.How to Use It note: please ensure the product fully charged before initial use! Charging operation instruction: Receiver low voltage hint: when in low voltage state, The red light flashes five times every ten seconds Transmitter low voltage hint: when its voltage is low, the indicator light flashes five times every 10 seconds, meanwhile, the battery in the screen displays 1 grid at the same time. Battery display Indicator light Charging requirements The data cable is Micro USB Output voltage :DC5V Charge the battery completely before the first use (this may take up to 2 hours). Do not charge the battery near flammable substances. Receiver charging state The red light will slowly brighten when charging, and the blue light will flash when fully charged. Spray Nozzle -6- Charging state of transmitter When charging, the red indicator will flash; Meanwhile, the battery in screen is running, After full charge, the green indicator light will flash once in 10 seconds. The battery in screen is full of 4 cells at the same time. 5.Operating Instructions for Various Functions of the Product Collar Power ON-OFF Power ON: Press and hold the ON/OFF button at the front center of the collar for 3 Seconds. After the collar Starts up in the ON position, you will see Blue Light come on for 3 Seconds and the collar will vibrate for 1 second at the same time. Power OFF: Press and hold the ON/OFF button at the front Centre of the collar for 3 Seconds After the collar Shuts down in the OFF position, you will see Red Light will flash 3 times and the collar will vibrate for 1 second at the same time. Press the power button for 3 times The red light flashes, the red light flashes within pairing time, the pairing time is within 20 seconds CH The blue light will stay on 5s after the successful pairing, 1. Press the CH button of the transmitter to select and the buzzer emits two beeps at the same time the channel 2: Press any function button to complete the pairing Channel switching operation mode: press CH button to switch channels Pairing receiver collars to the remote Transmitters: Please note your remote has 3 Channels and you can pair up to 3 individual collars to the 1 remote. As factory Default if you purchased 1 Collar Kits, they will come paired automatically to CH1 on your remote control. To Pair collars to the remote control follow these instructions: Firstly switch the Collar ON and make sure its in the ON Position as described above.Press the power on/off button 3 times in a row, till you see the red light flashes which means the collar is in pairing mode which. pairing time will be within 20 seconds. Then press CH button of the transmitter to select the channel you require and press any of the function buttons to complete the pairing. After the pairing is successful, the blue light will stay on for 5s and the buzzer will emit two beeps at the same time. You Can test pairing is successful by selecting the desired CH and testing the collar reacts to the various functions etc..... -7- CH1 CH2 CH3 CH Press the CH button to switch channels -8- Spray function level adjustment operation CH1 1 Mode 1-Weak CH1 2 Model 2 - Strong Level adjustment button CH1 3 Mode 3- Pulse Vibration function level adjustment operation: CH1 100 1 0 Mode 1- slow lift type CH1 100 CH 2 0 Mode 2- pulse type Vibration button 100 CH1 3 0 Mode 3- continuous type -9- Level adjustment button Tone function level adjustment operation: CH1 1 Mode 1- One beep CH1 CH 2 Mode 2- Two beeps Tone button CH1 3 Mode 3- three beeps B BB BBB Level adjustment button Light flicker function level adjustment operation: CH1 1 Mode 1 CH1 CH 2 Mode 2 Light button CH1 3 Mode 3 Blue light flashing The blue/red light flashes alternately Purple light flashing -10- Flashlight operation: Flashlight button Friendly Tips: 1.How to fill the citronella spray? Turn off the collar first, set the collar on a flat surface with the refill port turned upwards. Hold the refill spray can upright and Vigorously and Firmly (important) press the nozzle down into the refill port until you feel a sinking. Hold down Vigorously and Firmly for 15 seconds and then release. 2.Adjust the neckband according to the size of the dog's neck, cut the remaining part of the neckband, and burn the cut edge with a lighter to avoid the fray. 3.Put the receiver collar on the dog's neck and install it with the spray nozzle aligned vertically dog's nose. Make sure the collar is not too tight nor too loose - One finger should just fit between the collar belt and your dog's neck. -11- 4.For dogs with long body hair, it is necessary to trim the hair on the spray path, Ensure that the mist can be sprayed to an effective range. -12- 6.How the System Works The Remote Spray Trainer can easily help improve the communication between you and your dog. At the push of a button the remote sends a signal to your dog's collar. With three training options - tone, vibration and spray stimulation - you can ensure you will have a well-trained dog in a short amount of time. The trainer can be used for off-leash walks within a range of up to 880 yards. The remote includes and easy- to-read digital display, and the training collar is light weight, rechargeable and water-resistant. Using the remote spray dog trainer consistently and correctly,any basic obedience commands can be taught and many misbehaviors that your pet exhibits can be corrected. Important: The remote spray trainer has a range up to 880 yards. Hold the Remote Transmitter in a horizontal position away from your body to achieve optimum range.Terrain,weather,vegetation, transmission from other radio devices,and other factors will affect the maximum range. 7.Warm Tips Please read and follow the instructions in this manual.It is important to wear the collar correctly. When a pet wearing a collar for too long or too tight can cause skin damage.Too long or too tight wearing may cause stress, which can lead to skin damage.This is often mistaken for a burn. 1. Do not tie the device too tightly around the dog's neck. 2. Do not tie your belt to the collar. 3. Do not leave the device on the dog for more than 12 hours. 4. Replace the collar on your pet's neck every 1 or 2 hours. 5. Only used for connection to T500 transmitter and receiver -13- TRAINING GUIDE Fitting Collar on the Dog Make sure your dog is standing then place the collar strap in the middle of the dog's neck. The receiver should be on the underside of his/her neck . The Spray Nozzle towards the dog's nose. The Receiver Collar should fit snugly, yet loose enough to allow one finger to fit under the strap. Ensure a Proper Spray Pattern For the Receive Collar to perform properly, the nozzle must be positioned correctly and there must be a clear path from the Spray Nozzle to your dog's snout. 1. Make sure the Spray Nozzle is angled out and pointing up towards the dog's snout. 2. For long-haired dogs, it may be necessary to trim the neck hairs along the path of the spray. It is important that the spray reaches the dog's snout to be effective. 3. For optimal performance, the Receiver Collar should be refilled before each use. General Training Tips 1. Make training sessions short and positive (between 10-15 minutes long for each session.) 2. Train one dog at a time. 3. During the first initial training sessions, keep the dog in a familiar outdoor environment. 4. Use a long leash fastened to a non-metallic collar to help the dog's learning. 5. Be consistent. Give your dog a tone and/or spray with each misbehaviour. 6. Teach the dog a command first before reinforcing the command with the remote transmitter. 7. Issue one obedience command at a time. Do not use the training system for commands that the dog has not learnt. 8. Do not overcorrect your dog. Use as few sprays as possible to train your dog. 9. During training, look for all the positive changes in the dog's behaviour and remember to reinforce them promptly with ample praise and reward. 10. If you notice one situation in which your dog misbehaves repeatedly, set up this situation as a training session. This will dramatically increase your chances of success. -14- 11. If your dog has a timid reaction to the tone or spray (especially the first couple of times), do not be alarmed. Redirect their attention to a simple and appropriate behaviour (i.e. a known command such as "sit"). 12. Please keep in mind, that you should keep training sessions short and end every session on a high note. Stop training and play with the dog as soon the dog has accomplished a new level of proficiency. 13. Never use the MY PET COMMAND Remote Spray Trainer to correct or eliminate any form of aggressive behaviour. If your dog exhibits such behaviour, contact a professional trainer. Aggression in dogs is the result of many factors- it may be a learned behaviour or it may be brought on as a result of fear. Another factor contributing to aggression in dogs is social dominance. Every dog is different. HOW DOGS LEARN Here are some basic guidelines that cover all your remote trainer work on obedience commands. Follow a step-by-step introduction process on each command. Don't assume that your dog will understand a remote trainer correction in connection with a command. The stimulus can confuse them initially, even if they know the command. Don't introduce remote training around distractions. Keep things simple for your dog in their first sessions. They can't learn well when there's too much going on. Learning to Train Every animal on the planet has an alpha or beta relationship with every other animal. We usually think of "beta" as submissive and beaten down, but in wild packs or herds, that is not the case. The beta dog in a pack of wild dogs is still quite happy and lives a good life. So your dog should live the comfortable life while remaining in the beta position. Your dog will be quite happy being beta as long as you show the dog that beta is a good way to live. In dog terms, you are the "alpha," giving your dog everything it needs to survive. The essentials of food, shelter, and most importantly, companionship (the pack) are provided by you. For those things, your dog will work and be happy as long as you demonstrate that you will not submit to challenges. To be sure, the beta dog will present regular challenges in hopes of gaining the alpha position. If the beta dog wins the challenge, there is a new leader of the pack, so do not give in. Some of the challenges are subtle. Those are the ones you must pay close attention to while training. If you win the small battles, the big fights will be much easier to handle. Dogs see the world in black and white. To your dog, either you are in control or it is. There is no middle ground. There are two most important points, conditioned responses and substitution, will be the cornerstones of your training program. Conditioned responses to commands are mandatory for a properly trained dog. When you explain something one time to a person, he or she will understand it and quite often give a positive response when questioned on that topic. Canines are different in that they trust their instincts implicitly. Instincts have protected canines for thousands of years from wild animals and other threats, and those threats still live in their minds today. In your training program, you must totally condition the responses to the obedience commands to such a degree that your dog trusts you more than its own instincts. That is a tall order, and you must take it seriously or you will not have success. Simple repetition is the only way to properly condition a dog. Simple repetition to the tune of around 1,000 repetitions per command will do this nicely. That might seem like an undoable task but if you will train consistently, it will take only a short time. Substitution: This is where we use a stimulus to cause a response and then add another stimulus simultaneously until the second stimulus evokes the same response as the first. You might remember Dr. Pavlov's work with ringing the dinner bell as he was feeding his dog. It did not take long before simply ringing the dinner bell caused the dog to salivate. You will use this same practice in training your dog, beginning with a leash, progressing to words and then finishing with electrical stimulation. It may sound overwhelming right now but you will be successful and your dog will accept this without question if you follow the steps. -15- -16- 8.Summary of Frequently Asked Questions Fault Event Boot Failure Fault State Unable to power on NO1 Reason Analysis Press the on/off button(Power) for less than 3 seconds Troubleshooting Press and hold continuously for 3 seconds, or change Method your finger to press until the device is turned on Fault Event Fault State Boot Failure Unable to power on NO2 Reason Analysis Press the power button and the red light flashes Troubleshooting Method The blue light is on when normal startup. If the red light is on, it means there is no power and it needs to be charged. Fault Event Fault State Boot Failure Unable to power on NO3 Reason Analysis Unable to power off Troubleshooting Method Press and hold continuously for 3 seconds, or change your finger to press, until the shutdown. Once shutdown successful,the red light flash, then off. Unable to spray Internal solenoid valve doesn't work (no clicking sound) NO4 Fault Event Fault State 1.The product is out of power or the voltage is too low 2.The gas accumulation pressure inside the tank is Reason Analysis too high Charging Remove accumulated air (refer to Figure 1) Troubleshooting Method -17- Unable to spray Solenoid valve in operation ( click sound can be heard) NO5 Fault Event Fault State 1.No gas 2.Product direction is wrong (nozzle forward. Tilt upward) Reason Analysis 3.There's a foreign body blocking the inside 1.Inflatable 2.Re-wear the collar 3.Give a dog a trim or trim the hair around the device, Troubleshooting and check to see if the nozzle is clogged with foreign Method matter such as dog hair. Fault Event Fault State NO6 Gas Leakage Spray nozzle leakage (gas directly is sprayed from the nozzle during inflation Reason Analysis There's foreign body inside Troubleshooting Method 1.Filling a few times more to use gas to remove foreign bodies, or clean the nozzle with a fine needle 2.Give a dog a trim or trim the hair around the device, and check to see if the nozzle is clogged with foreign matter such as dog hair. Fault Event Fault State NO7 No gas can be feeded in After gas is refilled, there is no gas in the tank of the device. 1.The air pressure inside the tank is too high to add gas 2.air nozzle blocking 3.The gas in the refill bottle has been used up Reason Analysis 4.The nozzle of the refill bottle is not sprayed (blocked) 5.The leakage of the gas nozzle of the refill bottle is serious, the pressure is not enough to add 6.The refill nozzle type of the refill bottle is wrong -18- 1.Remove accumulated air 2.Professional staff repair or return to factory to repair 3.Get a new one Troubleshooting Method 4.Get a new one 5.Get a new one 6.Get the correct type of refill NO8 Fault Event Fault State Unable to charge The indicator light doesn't go on when charging 1.The data cable USB are not plugged in properly Reason Analysis 2.The data cable is damaged 3.The charging port of the device is damaged 1.Reinsert the data cale Troubleshooting Method 2.Micro USBReplace the data cable, its model is Micro USB 3.(Identify a correct direction of charging port, because it is easy to be damaged in incorrect direction by violent insertion) 9.FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. -Caution: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Declaration of Conformity: Declaration of conformity (see chapter ,,Declaration of conformity"): Products designated with this symbol fulfill all applicable community provisions of the European Economic Area. This symbol certifies that the device's electromagnetic interference is below the limit approved by the United States Federal Communications Commission. Disposal:Disposing of packaging Dispose of the packaging according to type: · Cardboard and carton to waste paper · Foils in the recycling collection -19- -20- Disposing of the device Applicable in the European Union and other European countries with systems for separate collection of recyclable materials. Old devices must not be disposed of in household waste! If the Modular Remote Trainer can no longer be used, all consu-mers are required by law to hand over the old devices separate from household waste, for example, at a collection point of their local community/district. This ensures that the old appliances are properly recycled and that negative effects on the environ-ment are avoided. That is why electrical devices are marked with the symbol shown here Reference Size for Different Dogs Size Mini Small Medium Neck(In) 7.8-8.6 7.8-9.5 9.0-11.0 Chest Back Measurement Lenght (In) (In) Type 9.8-11.8 11.4-14.2 7.5 Chihuahua,Yorkshire Terrier Chihuahua,Yorkshire 9 Terrier,Poodle, Pomeranian 13.7-16.5 11 Maltese Dog, Shih Tzu Large 9.6-12.2 16.2-18.5 12.2 Miniature Schnauzer, Pekingese Large 11.8-13.4 18.1-20.8 13.8 Schnauzer,English Cocker Spaniel Large 13.0-14.5 20.5-23.2 15.7 Beagle Huge 17.0-18.9 30.0-33.0 23.6 Husky 18.5-20.5 21.6-24.4 34.6-38.2 36.2-39.3 -21- 25.6 Labrador,Retriener 27.5 Golden Retriener, Old English Sheepdog Reference Weight for Dogs Large Dog (Body height above 24 inch, Weight above 88 lbs) Medium Dog (Height 16-24 inch,Weight 24.2-66 Ibs) Small Dog (Height 10-16 inch,Weight 8.8-22 Ibs) Mini Dog (Height under 10 inch,Weight under 8.8 Ibs) www.mypetcommand.com USA 888 686 6495 Australia 1300 416 703 UK 020 3936 1156 sales@mypetcommand.com -22-