Jabra Dial 550: Adjusting Click Tone Level

Using Jabra Direct

Prerequisites: Jabra Direct version 3.x or later.

To adjust the click tone level using Jabra Direct, follow these steps:

1. Open Jabra Direct.
2. Click Device settings.
3. Click Handset.
4. In Keypad click tone level, select the desired level.
5. Click Apply.

The Jabra Direct interface shows device settings, including options for Handset, Keypad click tone level, Ringtone volume, Ringtone type, Mute reminder tone, and Product Information.

Manual Adjustment

To change the click tone level manually, follow these steps:

1. Press the right menu button on the Jabra Dial 550.
2. Use the up and down buttons to scroll to Keypad tones, and press the left button to select it.
3. Use the Up/Down buttons to scroll, and then select the desired tone volume.