HÖSTULOTA

Important Information

⚠ For indoor use only.

The light source of this luminaire is not replaceable. When the light source reaches its end of life, the whole luminaire shall be replaced.

Getting Started

Diagrams illustrate the process of setting up the lamp. The first diagram shows a person looking confused at several parts, suggesting potential assembly or setup questions. The second diagram shows a person successfully connecting the lamp to a power source, with the IKEA logo visible, indicating a completed setup or usage scenario.

Connection

Connect the lamp to a power source using a USB connection. This can be a USB port on a laptop or a compatible USB wall adapter.

Specifications:

• 5VDC Min 1.0A, SELV
• 5VDC Min 1.0A, CLASS 2

Diagrams show the USB connector being plugged into a laptop's USB port and into a wall adapter.

Operation

To turn the light on or off, touch the ring on the lamp.

To adjust the brightness, touch and hold the ring for approximately 3 seconds.

Diagrams illustrate touching the ring to toggle the light and holding the ring to adjust brightness, indicated by radiating lines.

Usage Precautions

The flexible neck of the lamp should be bent gently into the desired position. Avoid sharp or forceful bending that could damage the internal components.

Diagrams show an example of incorrect bending (sharp angle with a cross symbol) and correct bending (smooth curve with a checkmark symbol).

© Inter IKEA Systems B.V. 2025