HP LaserJet CF289A-X-Y-YC Print Cartridge Safety Data Sheet
SECTION 1: Identification of the substance/mixture and of the company/undertaking
Important information: *** This Safety Data Sheet is only authorised for use by HP for HP Original products. Any unauthorised use of this Safety Data Sheet is strictly prohibited and may result in legal action being taken by HP. ***
1.1. Product identifier
Trade name or designation of the mixture: HP LaserJet CF289A-X-Y-YC Print Cartridge
Registration number: None.
Synonyms: None.
Issue date: 01-Mar-2019
Version number: 07
Revision date: 07-Jun-2021
Supersedes date: 22-Dec-2020
1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses: This product is a toner preparation that is used in HP LaserJet Enterprise M507x, M507dn, M507n, M507dng, HP LJ Enterprise Flow MFP M528z, M528c, E52645c, HP LJ Mngd E52645dn, E50145dn, HP LJ Entrprise MFP M528f, M528dn series printers.
Uses advised against: None known.
1.3. Details of the supplier of the safety data sheet
Supplier: HP Inc UK Ltd, Regulatory Enquiries, Earley West, 300 Thames Valley Park Drive, Reading, RG6 1PT
Telephone (Consumer): +44 20 7660 0596
Telephone (Commercial): +44 20 7660 0403
HP Inc. health effects line (Toll-free within the US): 1-800-457-4209
HP Inc. health effects line (Direct): 1-760-710-0048
HP Inc. Customer Care Line (Toll-free within the US): 1-800-474-6836
HP Inc. Customer Care Line (Direct): 1-208-323-2551
Email: hpcustomer.inquiries@hp.com
1.4 Emergency telephone number: 0207771 5307
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 as amended: This mixture does not meet the criteria for classification as hazardous according to Regulation (EC) 1272/2008.
2.2. Label elements
Label according to Regulation (EC) No. 1272/2008 as amended:
Contains: Amorphous silica, Iron oxide, Styrene acrylate copolymer, Wax
Hazard pictograms: None.
Signal word: None.
Hazard statements: The mixture does not meet the criteria for classification.
Precautionary statements:
- Prevention: Not available.
- Response: Not available.
- Storage: Not available.
- Disposal: Not available.
Supplemental label information: None.
2.3. Other hazards
None of the other ingredients in this preparation are classified as carcinogens according to ACGIH, EU, IARC, MAK, NTP or OSHA. This preparation contains no component classified as Persistent, Bioaccumulative, and Toxic (PBT) or very Persistent and very Bioaccumulative (vPvB) as defined under Regulation (EC) 1907/2006.
SECTION 3: Composition/information on ingredients
3.2. Mixtures
General information:
Chemical name | % | CAS-No. / EC No. | REACH Registration No. | Index No. | Notes |
---|---|---|---|---|---|
Styrene acrylate copolymer | <50 | Proprietary | - | - | - |
Iron oxide | <45 | 1317-61-9 215-277-5 | - | - | - |
Wax | <15 | Proprietary | - | - | - |
Amorphous silica | <2 | 7631-86-9 231-545-4 | 01-2119379499-16-xxxx | - | - |
SECTION 4: First aid measures
General information: Not available.
4.1. Description of first aid measures
- Inhalation: Move person to fresh air immediately. If irritation persists, consult a physician.
- Skin contact: Wash affected areas thoroughly with mild soap and water. Get medical attention if irritation develops or persists.
- Eye contact: Do not rub eyes. Immediately flush with large amounts of clean, warm water (low pressure) for at least 15 minutes or until particles are removed. If irritation persists, consult a physician.
- Ingestion: Rinse mouth with water. Drink one to two glasses of water. If symptoms occur, consult a physician.
4.2. Most important symptoms and effects, both acute and delayed: Not available.
4.3. Indication of any immediate medical attention and special treatment needed: Not available.
SECTION 5: Firefighting measures
General fire hazards: Not available.
5.1. Extinguishing media
- Suitable extinguishing media: CO2, water, or dry chemical
- Unsuitable extinguishing media: None known.
5.2. Special hazards arising from the substance or mixture: Like most organic material in powder form, toner can form explosive dust-air mixtures when finely dispersed in air.
5.3. Advice for firefighters
- Special protective equipment for firefighters: Not available.
- Special fire fighting procedures: If fire occurs in the printer, treat as an electrical fire.
- Specific methods: None established.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
- For non-emergency personnel: Minimize dust generation and accumulation.
- For emergency responders: Not available.
6.2. Environmental precautions: Do not flush into surface water or sanitary sewer system. See also section 13 Disposal considerations.
6.3. Methods and material for containment and cleaning up: Slowly vacuum or sweep the material into a bag or other sealed container. Clean remainder with a damp cloth or vacuum cleaner. If a vacuum is used, the motor must be rated as dust explosion-proof. Fine powder can form explosive dust-air mixtures. Dispose of in compliance with federal, state, and local regulations.
6.4. Reference to other sections: Not available.
SECTION 7: Handling and storage
7.1. Precautions for safe handling: Keep out of the reach of children. Avoid inhalation of dust and contact with skin and eyes. Use with adequate ventilation. Keep away from excessive heat, sparks, and open flames.
7.2. Conditions for safe storage, including any incompatibilities: Keep out of the reach of children. Keep tightly closed and dry. Store at room temperature. Store away from strong oxidizers.
7.3. Specific end use(s): Not available.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Occupational exposure limits: No exposure limits noted for ingredient(s).
Biological limit values: No biological exposure limits noted for the ingredient(s).
Recommended monitoring procedures: Not available.
Derived no effect levels (DNELs): Not available.
Predicted no effect concentrations (PNECs): Not available.
Exposure guidelines: 5 mg/m3 (Respirable Fraction), 3 mg/m3 (Respirable Particulate) Amorphous silica: USA OSHA (TWA/PEL): 20 mppcf 80 (mg/m3)/%SiO2, ACGIH (TWA/TLV): 10 mg/m3 TRGS 900 (Luftgrenzwert) - 10 mg/m3 (Einatembare partikel), 3 mg/m3 (Alveolengängige fraktion) UK WEL: 10 mg/m3 (Respirable Dust), 5 mg/m3 (Inhalable Dust)
8.2. Exposure controls
Appropriate engineering controls: Use in a well ventilated area.
Individual protection measures, such as personal protective equipment
- General information: No personal respiratory protective equipment required under normal conditions of use.
- Eye/face protection: Not available.
- Skin protection:
- Hand protection: Not available.
- Other: Not available.
- Respiratory protection: Not available.
- Thermal hazards: Not available.
- Hygiene measures: Not available.
- Environmental exposure controls: Not available.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance: | Fine powder |
Physical state: | Solid. |
Form: | solid |
Color: | Black. |
Odor: | Slight plastic odor |
Odor threshold: | Not available. |
pH: | Not applicable |
Melting point/freezing point: | Not available. |
Initial boiling point and boiling range: | Not applicable |
Flash point: | Not applicable |
Evaporation rate: | Not available. |
Flammability (solid, gas): | Not available. |
Upper/lower flammability or explosive limits: | |
Flammability limit - lower (%): | Not flammable |
Flammability limit - upper (%): | Not available. |
Vapor pressure: | Not applicable |
Vapor density: | Not applicable |
Solubility(ies): | |
Solubility (water): | Negligible in water. Partially soluble in toluene and xylene. |
Partition coefficient (n-octanol/water): | Not available. |
Auto-ignition temperature: | No data available |
Decomposition temperature: | > 392 F (> 200 C) |
Viscosity: | Not applicable |
Explosive properties: | Not available. |
Oxidizing properties: | No information available. |
9.2. Other information
Softening point: 194 - 284 F (90 - 140 C)
Specific gravity: 1.4 - 1.8
SECTION 10: Stability and reactivity
10.1. Reactivity: Not available.
10.2. Chemical stability: Stable under normal storage conditions.
10.3. Possibility of hazardous reactions: Will not occur.
10.4. Conditions to avoid: Imaging Drum: Exposure to light
10.5. Incompatible materials: Strong oxidizers
10.6. Hazardous decomposition products: Carbon monoxide and carbon dioxide.
SECTION 11: Toxicological information
General information: Not available.
Information on likely routes of exposure
- Inhalation: Under normal conditions of intended use, this material is not expected to be an inhalation hazard.
- Skin contact: Contact with skin may result in mild irritation.
- Eye contact: Contact with eyes may result in mild irritation.
- Ingestion: Ingestion is not a likely route of exposure.
Symptoms: Not available.
11.1. Information on toxicological effects
- Acute toxicity: Based on available data, the classification criteria are not met.
- Skin corrosion/irritation: Based on available data, the classification criteria are not met.
- Serious eye damage/eye irritation: Based on available data, the classification criteria are not met.
- Respiratory sensitization: Based on available data, the classification criteria are not met.
- Skin sensitization: Based on available data, the classification criteria are not met.
- Germ cell mutagenicity: Negative, does not indicate mutagenic potential (Ames Test: Salmonella typhimurium)
- Carcinogenicity: Based on available data, the classification criteria are not met.
- Reproductive toxicity: Based on available data, the classification criteria are not met.
- Specific target organ toxicity - single exposure: Based on available data, the classification criteria are not met.
- Specific target organ toxicity - repeated exposure: Based on available data, the classification criteria are not met.
- Aspiration hazard: Based on available data, the classification criteria are not met.
Mixture versus substance information: Not available.
Other information: Complete toxicity data are not available for this specific formulation. Refer to Section 2 for potential health effects and Section 4 for first aid measures.
SECTION 12: Ecological information
12.1. Toxicity
Product CF289A-X-Y-YC
Aquatic | Species | Test Results |
---|---|---|
Algae | Algae | ErL50: > 1000 mg/l, 72 Hours |
Crustacea | Crustacea | EL50: > 1000 mg/l, 48 Hours |
Fish | Fish | LL50: > 1000 mg/l, 96 Hours |
12.2. Persistence and degradability: Not available.
12.3. Bioaccumulative potential: Not available.
Partition coefficient n-octanol/water (log Kow): Not available.
Bioconcentration factor (BCF): Not available.
12.4. Mobility in soil: Not available.
12.5. Results of PBT and vPvB assessment: Not a PBT or vPvB substance or mixture.
12.6. Other adverse effects: Not available.
SECTION 13: Disposal considerations
13.1. Waste treatment methods
- Residual waste: Not available.
- Contaminated packaging: Not available.
- EU waste code: Not available.
Disposal methods/information: Do not shred toner cartridge, unless dust-explosion prevention measures are taken. Finely dispersed particles may form explosive mixtures in air. Dispose of in compliance with federal, state, and local regulations.
HP's Planet Partners (trademark) supplies recycling program enables simple, convenient recycling of HP original inkjet and LaserJet supplies. For more information and to determine if this service is available in your location, please visit http://www.hp.com/recycle.
SECTION 14: Transport information
IATA
UN number: UN2807
UN proper shipping name: Magnetized Material
Transport hazard class(es):
- Class: 9
- Subsidiary risk: Not available.
- Packing group: No.
Environmental hazards: No.
Special precautions for user: Not available.
IATA Supplemental Information: 24 or more of these products shipped together, by air, are regulated as magnetized material.
IATA Further information: Not a dangerous good under DOT, IATA, ADR, IMDG, or RID.
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
EU regulations
- Regulation (EC) No. 1005/2009 on substances that deplete the ozone layer, Annex I and II, as amended: Not listed.
- Regulation (EC) No. 850/2004 On persistent organic pollutants, Annex I as amended: Not listed.
- Regulation (EU) No. 649/2012 concerning the export and import of dangerous chemicals, Annex I, Part 1 as amended: Not listed.
- Regulation (EU) No. 649/2012 concerning the export and import of dangerous chemicals, Annex I, Part 2 as amended: Not listed.
- Regulation (EU) No. 649/2012 concerning the export and import of dangerous chemicals, Annex I, Part 3 as amended: Not listed.
- Regulation (EU) No. 649/2012 concerning the export and import of dangerous chemicals, Annex V as amended: Not listed.
- Regulation (EC) No. 166/2006 Annex II Pollutant Release and Transfer Registry, as amended: Not listed.
- Regulation (EC) No. 1907/2006, REACH Article 59(10) Candidate List as currently published by ECHA: Not listed.
Authorizations
- Regulation (EC) No. 1907/2006, REACH Annex XIV Substances subject to authorization, as amended: Not listed.
Restrictions on use
- Regulation (EC) No. 1907/2006, REACH Annex XVII Substances subject to restriction on marketing and use as amended: Not listed.
- Directive 2004/37/EC: on the protection of workers from the risks related to exposure to carcinogens and mutagens at work, as amended: Not listed.
Other EU regulations
- Directive 2012/18/EU on major accident hazards involving dangerous substances, as amended: Not listed.
Other regulations
All chemical substances in this HP product have been notified or are exempt from notification under chemical substances notification laws in the following countries: US (TSCA), EU (EINECS/ELINCS), Switzerland, Canada (DSL/NDSL), Australia, Japan, Philippines, South Korea, New Zealand, and China.
Other information
This Safety Data Sheet complies with the requirements of Regulation (EU) 2015/830. Classification according to Regulation (EC) No 1272/2008 as amended.
National regulations
Not available.
15.2. Chemical safety assessment: See attached SUMI or GEIS document, if applicable.
SECTION 16: Other information
References
- Regulation (EC) No. 1907/2006 of December 18, 2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) and establishing a European Chemicals Agency (REACH).
- Regulation (EU) 2015/830 of May 28, 2015 amending Regulation (EC) No. 1907/2006.
- Regulation (EC) No. 1272/2008 of December 16, 2008 on classification, labeling and packaging of substances and mixtures, and amendments (CLP).
Information on evaluation method leading to the classification of mixture: The classification for health and environmental hazards is derived by a combination of calculation methods and test data, if available.
Full text of any H-statements not written out in full under Sections 2 to 15: None.
Revision information: None.
Training information: Follow training instructions when handling this material.
Disclaimer
This [Material] Safety Data Sheet is provided without charge to customers of Hewlett-Packard Company. Data is the most current known to Hewlett-Packard Company at the time of preparation of this (M)SDS and is believed to be accurate. It should not be construed as guaranteeing specific properties of the products as described or suitability for a particular application.
This safety data sheet is meant to convey information about HP inks (toners) provided in HP Original ink (toner) supplies. If our Safety Data Sheet has been provided to you with a refilled, remanufactured, compatible or other non-HP Original supply please be aware that the information contained herein was not meant to convey information about such products and there could be considerable differences from information in this document and the safety information for the product you purchased. Please contact the seller of the refilled, remanufactured or compatible supplies for applicable information, including information on personal protective equipment, exposure risks and safe handling guidance. HP does not accept refilled, remanufactured or compatible supplies in our recycling programs.
Explanation of abbreviations
- ACGIH: American Conference of Governmental Industrial Hygienists
- CAS: Chemical Abstracts Service
- CERCLA: Comprehensive Environmental Response Compensation and Liability Act
- CFR: Code of Federal Regulations
- COC: Cleveland Open Cup
- DOT: Department of Transportation
- EPCRA: Emergency Planning and Community Right-to-Know Act (aka SARA)
- IARC: International Agency for Research on Cancer
- NIOSH: National Institute for Occupational Safety and Health
- NTP: National Toxicology Program
- OSHA: Occupational Safety and Health Administration
- PEL: Permissible Exposure Limit
- RCRA: Resource Conservation and Recovery Act
- REC: Recommended
- REL: Recommended Exposure Limit
- SARA: Superfund Amendments and Reauthorization Act of 1986
- STEL: Short-Term Exposure Limit
- TCLP: Toxicity Characteristics Leaching Procedure
- TLV: Threshold Limit Value
- TSCA: Toxic Substances Control Act
- VOC: Volatile Organic Compounds