PRODUCT IDENTIFICATION
Definition of Production Data
Serial Year Number
| Code | Year |
|---|---|
| A | 2000 |
| B | 2001 |
| C | 2002 |
| ... | ... |
| S | 2018 |
| T | 2019 |
| ... | ... |
| Z | 2025 |
Serial Month Number
| Code | Month |
|---|---|
| 1 | January |
| 2 | February |
| ... | ... |
| 8 | August |
| 9 | September |
| A | October |
| B | November |
| C | December |
Examples
R320: March 20, 2017
S817: August 17, 2018
Hub Motor
Example: FM G370.250.D
The nameplate is engraved on the shell, showing such information as follows:
FM G370.250.D 11 008 F2 R320 0006
Identifier Breakdown:
- A FM: Front motor
- RM: Rear motor
- B G370: Motor model
- C 250: Rated motor power
- D D: Disc Brake, R: Roller Brake, V: V-Brake, DC: Disc Brake with cassette
- E 11: Coiling cycles
- F 008: Cable and connector code
- G F7: Internal identification code
- H R320: Production date
- I 0006: SN, Production serial number, ranging from 0000 to 9999; 0006 is the production serial number of the 6th motor.
Mid Motor
Example: MM G330.250.CCB
MM G330.250.C CB 15 018 F7 S817 0001
Identifier Breakdown:
- A MM: Mid motor
- B G330: Motor model
- C 250: Rated motor power
- D C: CAN protocol Communication
- E CB: Coaster brake (empty): no brake in the motor
- F 15: Number of winding turns
- G 018: Cable and connector code
- H F7: Internal identification code
- I S817: Production date
- J 0001: Production serial number, ranging from 0000 to 9999; 0001 is the production serial number of the first motor.
Display
Example: DP C260.CAN
DP C260.C 1.0 705 I1 Q728 0001
Identifier Breakdown:
- A DP: Display
- B C260: Display model
- C C: CAN protocol Communication
- D 1.0: Hardware version
- E 705: Cable and connector code
- F I1: Internal identification code
- G Q728: Production date
- H 0001: Production serial number, ranging from 0000 to 9999; 0001 is the production serial number of the first display.
Battery
Example: BT F05.200.C
Model: BT F06.200.C
Voltage: 43V
Capacity: 5Ah
Power: 200Wh
Manufacturer: DLG
CAUTION: Risk of fire or explosion if battery is used with an incompatible system. Do not open, disassemble, or pierce battery due to risk of short circuit, fire or explosion. In case of drop, shock or similar event, do not continue to use battery and return immediately. Only use original charger as supplied with battery due to risk of fire or explosion. Disposal of used batteries should follow locally enforced regulations. Please carefully read manual before use.
BT F05.200.C C1 S921 0052
Identifier Breakdown:
- A BT: Battery
- B F05: Battery model
- C 200: Energy content (Wh)
- D C: Can protocol Communication, UC: UART / Can protocol Communication
- E C1: Production factory number
- F S817: Production date
- G 0052: Production serial number, ranging from 0000 to 9999; 0052 is the production serial number of the 52nd battery.
Sensor
Example: SR PA212.32.ST.C
When you scan the QR code, the information show as below:
SR PA212. 32. ST .C 1.0 605 F8 S512 0001
Identifier Breakdown:
- A SR: Sensor
- B PA212: Sensor model
- C 32: Speed signal per cycle
- D ST: Speed and torque integrated sensor, S: Speed sensor
- E C: CAN protocol Communication
- F 1.0: Hardware version
- F 605: Cable and connector code
- G F8: Internal identification code
- H S512: Production date
- I 0001: Production serial number, ranging from 0000 to 9999; 0001 is the production serial number of the first sensor.
Controller
Example: CR S10F.350.FC
CR S10F. 350. FC 1.0 K09 F8 S518 0017
43V 13A 250W 25KM/H 28-2217
Identifier Breakdown:
- A CR: Controller
- B S10F: Controller model
- C 350: Rated power
- D FC: Control mode and CAN protocol Communication
- E 1.0: Hardware version
- F K09: Cable and connector code
- G F8: Internal identification code
- H S518: Production date
- I 0017: Production serial number, ranging from 0000 to 9999; 0017 is the production serial number of the 17th controller.
