ASUS SimPro Dock 2

Package Contents

• SimPro Dock 2 x 1
• 180W Adapter x 1
• User manual x 1
• Warranty card x 1

Hardware Interface

The SimPro Dock 2 features the following hardware interfaces:

1. USB Type-C®/Thunderbolt™ 3 cable
2. Docking power indicator
3. Smart card reader
4. Headphone/Headset jack
5. USB 3.2 Gen 2 port with USB Charger+
6. USB 3.2 Gen 2 port
7. USB 3.2 Gen 2 Type-C® port
8. Thunderbolt™ 3 port
9. Power button/Notebook PC status indicator
10. DisplayPort
11. HDMI 2.0 port
12. VGA port
13. Power (DC) input port
14. USB 3.2 Gen 1 port
15. LAN port
16. Kensington® security slot

Note: Power supply support and external display support vary per Notebook PC model. Visit the ASUS website for the compatibility list. Connect SimPro Dock 2 to your Notebook PC for simultaneous status LED indication, power on/off via the power button, and power delivery (max. 120W). Supported functions vary per Notebook PC model. Use only the bundled power adapter to charge the battery pack and supply power to your Notebook PC. To use all the functions of SimPro Dock 2, ensure your Notebook PC supports Intel® Thunderbolt™ technology.

Power Adapter Information

Power adapter information:

• Input voltage: 100-240Vac
• Input frequency: 50-60Hz
• Rating output current: 9A max. (180W)
• Rating output voltage: 20V

Follow the steps to use your SimPro Dock 2:

1. Connect the AC power cord to the AC/DC adapter.
2. Plug the AC power adapter into a 100V~240V power source.
3. Connect the DC power connector into the power (DC) input port of your SimPro Dock 2.
4. Connect the USB Type-C®/Thunderbolt™ 3 cable to your Notebook PC. (Supported output: 5V/3A, 9V/3A, 15V/3A, 20V/4.8A)
5. Go to https://www.asus.com/Laptops/Accessories/All-series/ASUS-SimPro-Dock-2/HelpDesk_BIOS/ to download and install the latest SimPro Dock 2 Tool and firmware on your Notebook PC before using your SimPro Dock 2 for the first time.

Compliance Information

Canada, Innovation, Science and Economic Development Canada (ISED) Notices

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

FCC Compliance Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Responsible Party: Asus Computer International
Address: 48720 Kato Rd., Fremont, CA 94538
Phone/Fax No: (510)739-3777/(510)608-4555

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.

India RoHS

This product complies with the “India E-Waste (Management) Rules, 2016” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) in concentrations exceeding 0.1% by weight in homogenous materials and 0.01% by weight in homogenous materials for cadmium, except for the exemptions listed in Schedule II of the Rule.

Vietnam RoHS

ASUS products sold in Vietnam, on or after September 23, 2011, meet the requirements of the Vietnam Circular 30/2011/TT-BCT.

Turkey RoHS

AEEE Yönetmeliğine Uygundur

Security

This product should be connected by means of a power cord to a socket-outlet with earthing connection.

Service and Support

Visit our multi-language website at https://www.asus.com/support/

Product Hazardous Substance Information

Product Hazardous Substance Information

Note 1: "○" indicates that the percentage content of the restricted substance does not exceed the percentage content threshold.

Note 2: "-" indicates that the restricted substance is an exemption.

This table is prepared in accordance with the provisions of SJ/T 11364.

O: Indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit requirements specified in GB/T 26572.

X: Indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit requirements specified in GB/T 26572, but the component still complies with the provisions of EU Directive 2011/65/EU.

Note: The environmental protection use period indicated for this product refers to normal usage conditions.

Simplified EU Declaration of Conformity

ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: https://www.asus.com/support/

Simplified UKCA Declaration of Conformity

ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Regulations. Full text of UKCA declaration of conformity is available at: https://www.asus.com/support/

Safety Precautions

Warning! The bottom of the docking station may get hot during use or charging. Therefore, do not place the docking station on a surface that obstructs its ventilation holes when in use.

Caution!

• The docking station should only be used in an environment with temperatures between 5°C (41°F) and 35°C (95°F).
• Use the correct power adapter as indicated on the power label on the bottom of the docking station. Using an incorrect power adapter may cause damage to internal components.
• The adapter may get hot during use. Do not cover the adapter with other objects when it is connected to an external power source, and keep the adapter away from your body.