Srhythm K1 Portable Wireless Speaker User Manual
Safety Instructions
- Read the manual carefully before use and keep it for later.
- Use original or certified cables.
- Do not disassemble the speaker.
- Avoid dropping the speaker.
- Keep away from extreme heat or cold. Unplug this apparatus during storms or long periods of non-use.
- Do not expose products containing batteries to excessive heat (e.g., from storage in direct sunlight, or fire).
- Keep the product away from flames and heat sources (e.g., lighted candles).
- Turn off the speaker to save power when not in use.
Technical Specifications
| Product Name | Srhythm K1 |
|---|---|
| Model | K1 |
| Bluetooth Version | 6.0 |
| Battery Capacity | 1200mAh |
| Charging Time | About 2 hours (5V/1A) |
| Music Play Time | About 20 hours at 60% volume |
| Rated Power | 5Wrms |
| Bluetooth Profile | HSP, A2DP, AVRCP |
| Bluetooth Range | 10m/33ft |
| Waterproof Rating | IPX7 |
| Net Weight | 178g/0.4lb |
| Dimensions (W*H*D) | 102.0mm*79.0mm*36.0mm |
What's in the Box
- Srhythm K1 Speaker * 1
- Type-C Charging Cable * 1
- 3.5mm Audio Cable * 1
- Quick Start Guide with Srhythm APP * 1
- Quick Start Guide * 1
At a Glance
Controls
- Volume UP / Next Song: + button
- Multi-function Button / Play / Pause button: Δ button
- Volume Down / Previous Song: - button
Ports
- 3.5mm AUX Port
- Type-C Charging Port
Indicator
- LED Indicator Light
How to Use
1. Turn ON / OFF
To turn ON: Press and hold the Multi-function Button for 3 seconds. (LED Indicator: Blue light on 1s, Voice prompt: Power ON).
To turn OFF: Press and hold the Multi-function Button for 5 seconds. (LED Indicator: Blue light flashes 2 times, Voice prompt: Power OFF).
Note: Srhythm K1 will automatically turn off after 10 minutes if no device is connected.
2. Pair with your device
Step 1: Turn on the Bluetooth speaker and enter pairing mode. (LED Indicator: Blue light flashes, Voice prompt: Pairing).
Step 2: Keep the speaker and your mobile phone as close as possible during pairing.
Step 3: Turn on Bluetooth on your phone. Search for "Srhythm K1". (LED Indicator: Blue light always on, Voice prompt: Connected).
3. Connect via Aux
Turn on the speaker (as above). Connect the speaker via Aux cable. (LED Indicator: White light always on).
Note: AUX mode is unavailable when the battery is low. When using AUX mode, volume/play/pause controls work on the speaker, but track control must be done from the connected device.
4. Charge the speaker
Use original or certified cables.
The red LED lights up during charging and turns off when fully charged.
Note: For safety, do not use the speaker while charging.
Use K1 with the Srhythm APP
Steps:
- Download the Srhythm App from Google Play or App Store.
- Pair your device with the speaker before starting the app.
- Log in to the Srhythm App and tap "Add device".
- Wait 5 seconds for device search, then tap "Add". Manual addition is also possible.
Functionality
Control your K1 speakers and set your preferred EQ within the Srhythm App.
Tips:
- Reset the K1 speaker when connected to the Srhythm App on another device. Reset: Long-press both the Multi-function button and the Volume Down button for 3-5 seconds.
- For Android, enable the "Sync volume with phone" option (Bluetooth > Srhythm K1 > Advanced/More settings).
Function Details
| Button Action | Function |
|---|---|
| Δ + 3s | Turn on |
| Δ + 5s | Turn off |
| Δ x 1 | Play / Pause |
| + x 1 | Volume up |
| + 2s | Next song |
| | x 1 | Volume down |
| | 2s | Previous song |
| Δ| 2s | Reset |
Product Dimensions
Dimensions: 102mm (width) x 79mm (height) x 36mm (depth).
FCC Compliance
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
