17年专业从事RFID工业识别,智能传感器,读写器及模块,RFID软硬件解决方案的专业服务商
User Manual for VANCH models including: VM-M50, 2A3H9VM-M50, 2A3H9VMM50, VMM50, Integrated UHF RFID Reader Module, VM-M50 Integrated UHF RFID Reader Module, UHF RFID Reader Module, RFID Reader Module, Reader Module, Module
Shenzhen Vanch Intelligent Technology Co.,Ltd VM-M50 2A3H9VM-M50 2A3H9VMM50 vm m50
File Info : application/pdf, 4 Pages, 479.98KB
DocumentDocumentShenzhen VANCH Intelligent Technology Co.,Ltd Integrated UHF RFID Reader Module VMM50 Product Feature Integrated antenna characteristics 1. The label reading is sensitive and stable. 2. 0-2.5m stable reading distance. 3. Multi-label reading performance: >50pcs. 4. Reading speed: <50pcs/second. Solve the problem of heat completely: 1. No need to connect any external heat sink. Long-term continuous full-load work without heat at room temperature. 2. Sustain electricity<200mA @ 3.5V (26 dBm Output). Pulse peak current<260mA. Outstanding stability: 1. 24 hours x 365days work normally. 2. Performance little influenced by cover, electromagnetic environment etc. 3. Wide temperature design, extremely low temperature drift coefficient. Excellent consistency: 1. A model of consistent design. 2. Choose the top level components to keep each parameters stable and consistence. Brief and high efficient interface of hardware and software: 3. Peripheral circuit is very easy. The signal power, no need for extra connecting tantalum capacitor. Installation method: Support 5pin WAFER installation. Parameters Model No. Electrical parmeters Working Voltage PCB Size Standby Current VM-M50 DC 3.5~ 5 V Pcb size: 50*50mm ,Ceramic antenna size: 40*40mm, Overall height: 8.5mm <80mA (EN pin high level) Tel0755-82426775 Fax: 0755-82403457-600 Website: www.vanch.cn E-mail: sales@vanch.net Add: 4/F, the West of Building B, Fuanna Industrial Park, No.1 Qingning Road, Shenzhen VANCH Intelligent Technology Co.,Ltd Working Current 180mA @5V (26 dBm Output25°C) Operating Time <100mS Operation temp. - 20 °C - + 70 °C Storage temp. - 20 °C - + 85 °C Working humidity < 95% ( + 25 °C) Protocol EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C Frequency Supported Working Area Output Power Range 902~928MHZ US, Canada and other regions following U.S. FCC Europe and other regions following ETSI EN 302 208 Mainland ChinaJapanKoreaMalaysiaTaiwan 18-26 dBm Read/Write Read: 0-250cm; Write:0-50cm (Adjustable) Output Power Accuracy +/- 1dB Output Power Flatness +/- 0.2dB Receive Sensitivity < -70dBm Store Tag Peak Speed > 50pcs/sec Tags storage capacity 200pcs tag @ 96 bit EPC Tag RSSI Support Communication Interface TTL Uart interfaceFPC 115200 bps (default and recommend) Communication Baud Rate Heat-dissipating method Air cooling(no need for out install cooling fin Connector PIN definition and structural drawings: Tel0755-82426775 Fax: 0755-82403457-600 Website: www.vanch.cn E-mail: sales@vanch.net Add: 4/F, the West of Building B, Fuanna Industrial Park, No.1 Qingning Road, Shenzhen VANCH Intelligent Technology Co.,Ltd 5p transposon definition: PIN Definition Explanation 1 --GND 2 --EN High level enable module 3 -- Module RX 4 --Module TX 5 --VCC Power DC 3.5V-5V The antenna is welded to the PCB board by the antenna pin Tel0755-82426775 Fax: 0755-82403457-600 Website: www.vanch.cn E-mail: sales@vanch.net Add: 4/F, the West of Building B, Fuanna Industrial Park, No.1 Qingning Road, Shenzhen VANCH Intelligent Technology Co.,Ltd FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Shenzhen VANCH Intelligent Technology Co., Ltd./ADS-BLEnRF1-ANT902MHz ~ 928MHz: 2.5dBi Host product manufacturers that they need to provide a physical or elabel stating, "Contains FCC ID: 2A3H9VMM50 " with their finished product. The host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed. The final host integrator must ensure there is no instruction provided in the user manual or customer docume ntation indicating how to install or remove the transmitter module except such device has implemented twoways authentication between module and the host system. The final host manual shall include the following regulatory statement: This equipment has been tested and found to comply with the limits. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This module has been tested and found to comply with part 15.247 requirements for Modular Approval. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Tel0755-82426775 Fax: 0755-82403457-600 Website: www.vanch.cn E-mail: sales@vanch.net Add: 4/F, the West of Building B, Fuanna Industrial Park, No.1 Qingning Road,