User Guide for iComTech models including: QEC-M-150T 15 Inch Open Frame Touch Panel PC, QEC-M-150T, 15 Inch Open Frame Touch Panel PC, Open Frame Touch Panel PC, Touch Panel PC, Panel PC
QEC-M-150T - with 15" Touch LCD. - ETHERCAT - iComTech
QEC-M-150T EtherCAT Master System 15" LCD Features: · DM&P Vortex86EX2 Processor, Master 533MHz/Slave 400MHz · EtherCAT Master Core runs on dedicated CPU · Hardware/Software Real-time · 86Duino Integrated Development Environment (IDE) · Up to 128 axes support for motion control · 15-inch TFT 1024×768 Resolution LCD with Restive touchscreen · Internal Monitoring Hardware Information · Operating temperature 0 to +50°C/-20 to +60°C (Option) · 3LAN/3USB/MicroUSB/VGA/MiniPCIe/Arduino Pins Specifications CPU DM&P Vortex86EX2 Processor, Master 533MHz/Slave 400MHz Memory 512MB/1GB DDRIII Onboard Storage 32MB SPI Flash/2GB SLC eMMC LCD Display 15-inch TFT 1024×768 Resolution LCD with Restive touchscreen LAN 1Gbps Ethernet RJ45 x1 & 10/100MbpsEthernet RJ45 x2 for EtherCAT Expansion MiniPCIe x 1 with Micro SIM Card Holder I/O Connector 2.54mm 2-pin header for Power Connector 1.25mm 4-pin wafer for Line-Out Power DC Input/Output Connector x1 Micro USB (Type-B) x1 (Upload/Debug only) VGA Connector (10-pin) x1 1.25mm 4-pin header for EXT I2C TFT Driver Micro SIM Card Holder x1 MiniPCIe slot x1 USB Host x3 RJ45 x3 Arduino Compatible Connector 2.54mm 10-pin female header for I2C0, MCM, GPIO 2.54mm 8-pin female header for MCM, GPIO, COM1(TTL) 2.54mm 8-pin female header for Power source 2.54mm 6-pin female header for ADC/GPIO 2.54mm 6-pin female header for CAN0 and CAN1 bus 2.54mm 6-pin female header for GPIO, VCC and GND 2.54mm 10-pin header for SPI, RESET2.54mm 10-pin header for SPI, RESET-, RS485 Protocol EtherCAT (EtherCAT Master Functions: PDO, CoE, DC, Cable-redundancy, etc.) Ethernet Standard IEEE 802.3 Control Cycle Time 125 µs (min.) Power Connector 6-pin Power Input/Output Power Requirement +12 to +50VDC Power Input (Typ. +24VDC) LCD Display Power DCM-12V: Input 15~36Vdc and Output 12V@Max. 2.5A. Power Comsumption 10W Operating Temperature 0 to +50°C/-20 to +60°C (Option) Dimension 246 x 185.33 x 32.83mm Weight 2.3 Kg Internal Monitoring Temperature, Voltage, Current Software Support 86Duino Coding IDE (The environment is written in Java and based on Arduino IDE, Processing, DJGPP, and other open source software) Last Updated: November 1, 2023 QEC-M-150T EtherCAT Master System 15" LCD Ordering Information QEC-M-150T Vortex86EX2 Processor 533MHz-based EtherCAT Master System with 15-inch LCD QEC-M-150TP Vortex86EX2 Processor 533MHz-based EtherCAT Master System with 15-inch LCD/PoE * For detailed ordering information, please contact our sales staff or view the user manual. Dimension Last Updated: November 1, 2023Writer LibreOffice 7.1