Doublecom DB6000ACL-Pro
Industrial Wireless AP by Shanghai Weirui Electronic Technology Co., Ltd.
Product Overview
The Doublecom DB6000ACL-Pro is a high-power, high-bandwidth, and high-performance 5.8GHz industrial enhanced wireless base station. It supports 802.11a/n/ac standards, utilizing MIMO (2T2R) technology with 20/40/80 MHz wireless width and an 866Mbps physical layer bandwidth. The device offers a maximum transmission power of 1000mW (30dBm) and a reception sensitivity of -96dBm. With an external directional antenna, it can achieve transmission distances of up to 150km point-to-point. It features a 1000M RJ45 interface and can deliver over 350Mbps net bandwidth for 20KM point-to-point transmissions. For shorter-range coverage, it supports 1-5km wireless access using an external sector antenna. The device is built with industrial-grade design concepts, including advanced protection features, a robust operating temperature range (-40°C to 75°C), and an IP68 protection level, ensuring reliable all-weather operation in challenging electromagnetic environments.
Key Features
- High-power, high-bandwidth, high-performance 5.8GHz industrial wireless base station
- Supports 802.11a/n/ac standards
- MIMO 2T2R architecture with 866Mbps physical layer bandwidth
- Up to 1000mW (30dBm) transmission power
- Reception sensitivity down to -96dBm
- Long-distance point-to-point transmission (up to 150km with directional antenna)
- Industrial-grade design: IP68 protection, -40°C to 75°C operating temperature
- Advanced protection: anti-waves, anti-static, voltage/temperature sensing, RF/EM shielding
- 1000M RJ45 interface
- Supports various network functions including VLAN, DHCP, NAT, Firewall, IPv6, QoS
- Comprehensive management options: WEB, Telnet, SNMP, SSH, cloud/small program management
Detailed Parameters
General Specifications
| Parameter | Specification |
|---|---|
| Model | Doublecom DB6000ACL-Pro |
| Wireless Standard | 802.11 A/N/AC |
| Frequency Range | 4920-6100MHz |
| Maximum Transmission Bandwidth | 866Mbps |
| Maximum Output Power | 30dBm (1000mW) |
| Polarization Mode | MIMO: 2X2; double-polarization |
Transmission Speed and Sensitivity
| Transmission Speed | Receive Sensitivity (dBm) |
|---|---|
| 6Mbps | -96 |
| 54Mbps | -74 |
| MCS0 | -96 |
| MCS9 | -72 |
Transmission Distance Capabilities
- 150KM PTP (external directional antenna)
- 1-10KM (external sector antenna with directional client)
- 1-2KM (external sector antenna with omnidirectional client)
- 800m (external sector antenna with handheld terminal)
Supported Data Rates and Protocols
IEEE 802.11a Rates
6/9/12/18/24/36/48/54/72/96/108Mbps
IEEE 802.11b/g Rates
6/9/12/18/24/36/48/54Mbps
IEEE 802.11n Rates
HT20: 6.5/13/19.5/26/39/52/58.5/65/78/104/117/130/150Mbps
HT40: 3.5/27/40.5/54/81/108/121.5/135/162/216/243/270/300Mbps
IEEE 802.11ac Rates
HT80: 65/130/195/260/390/520/585/650/780/866Mbps (MCS0~MCS9)
Supported Standards
IEEE 802.11a /n/ac/h/d; IEEE802.3d/u/ab
Supported Agreements
TDMA, LD, FAP, CSMA / CA, TCP / IP, IPX / SPX, NetBEUI, PPPOE, etc.
Management and Software
| Feature | Details |
|---|---|
| Management Style | Support Chinese / English, WEB or Telnet management; unified management on local or cloud management platform / small program management; configuration without restart. |
| Management Agreement | SNMP V1 / V2c / V3, Private API, SSH. |
| Hardware Reset | Support. |
| Software Function | Support. |
| Work Pattern | AP, PTP, Station br, Station WDS, Staiton stantard, etc. |
| Network Function | Support VLAN, DHCP, NAT, firewall, virtual bridge (up to 128 SSID), IPv6, packet analysis and filtering, accurate traffic control (QoS), etc. |
| Network Tools | Support PTP throughput test, network interface packet capture function (source address, destination address, port number, protocol number, message size, header content preview and other analysis functions), Ping, traceroute routing tracking, watchdog, etc. |
| Signal Indicator Light | Level 4 LED lamp display (power supply, interface, signal strength). |
| Real-time Data Flow Display | Support real-time display of each client throughput. |
| Temperature & Voltage Sensor | Support real-time display of power supply voltage and temperature. |
| MESH Network | Support. |
| Safety Login Control | Support login account encryption, account permission management, authorized user management and debugging. |
| MAC Address Control | Support two-way MAC binding. |
| Wireless Encryption | Support 40/104bit WEP, WPA/WPA2 PSK EAP encryption, TDMA protocol encryption. |
| 802.1x & Radius Certification | Support. |
Hardware Specifications
| Component | Specification |
|---|---|
| CPU | 720MHz |
| Internal Storage | 128MB |
| Network Interface | 1 x 10/100/1000BASE-T |
| Radio Number | 2 |
| Frequency | N-K (Note: Likely placeholder or typo for RF specification) |
| RF Type | (Not specified in detail) |
Power Supply
| Type | Specification |
|---|---|
| DC Voltage | DC adapter input/output: 12~24V/1.5A (optional) |
| POE | AC adapter input: AC 200~300V, output: DC 24V / 2000mA (standard); Standard 802.3af/at (optional) |
Interface Form
- Network POE power supply (default)
- Power supply for air plug interface (optional)
Environmental & Physical Properties
| Property | Value |
|---|---|
| Working Temperature | -40°C to 75°C |
| Wave Surge Protection | Common mode (DM) 6Kv / differential mode (CM) 2Kv |
| Electrostatic Protection | 8Kv (contact), 16Kv (air) |
| Air Capacity | 210 ml/min / cm³ (differential pressure =70mbar) |
| Storage Temperature | -45°C to 85°C |
| Humidity (non-condensation) | 95% (Non-condensation) |
| Weight | About 2kg (without bracket) |
| Maximum Power Consumption | About 17W |
Special Design Features
Electromagnetic shielding, wind protection, seismic resistance, efficient heat dissipation, external antenna support, and grounding design.
Equipment List
- Device host * 1
- POE power supply module * 1
- Power line * 1
- L-shaped mounting bracket * 1
- Certificate * 1
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum 20cm distance between the radiator and your body. Use only the supplied antenna.