Unilite MTB-5300 LED Work Light

Product Features

• Ultra-bright 5300 lumen, 50W, 6500K COB LED
• Hybrid operation: rechargeable and mains powered
• Compatible with up to 20V 6.0Ah batteries from Milwaukee, De Walt, Makita & Metabo (4 adaptors included)
• Super tough, heavy-duty nylon construction
• Easy-carry rubber grip handle
• 180° rotating stand/base with holes for tripod/magnet mounting
• Secure battery compartment cover (note: larger 6Ah batteries may require the cover to be used without it)
• Automatic switch-over from mains to battery power in case of power failure (if a battery is installed)
• 2A USB PowerBank functionality (works with any installed battery)
• 4 x Battery level and charging indicator lights
• Includes a 16.4ft (5m) heavy-duty 24V 2.7A H05RN-F power lead/charger with UK, EU, US & AU adaptors
• Unilite 14.8V 5.2Ah battery available separately (Note: only the Unilite battery can be charged via the lamp)

Battery: Not included (bare tool)

Weight: 44oz (approx. 1.25 kg)

Dimensions: W 9.3 x H 10.1 x D 7.1 inches (approx. 23.6 x 25.7 x 18 cm)

ANSI FL1 Standard Specifications

Note: Runtimes are based on using the Unilite 14.8V 5.2Ah battery. Runtimes with other batteries will vary.

Operating Instructions

To turn the unit on and select light output, press the On/Off circle switch located on the back of the unit. Continue pressing to cycle through the 4 brightness settings, indicated by the row of green indicator lights at the bottom.

Memory Switch: If the light is left ON in any mode for 5 seconds or more, the next press of the switch will turn the unit OFF. The subsequent press will turn the unit back ON to the last used mode.

Product Diagram Description: The rear of the unit shows the On/Off Switch, a Power Lead Port for connecting the charger/mains adapter, a Powerbank Output port, and the Battery Compartment Cover. Please note: Powerstack, Nuron, and Flex 24V batteries are not compatible.

Battery Installation

VERY IMPORTANT: When changing a battery, NEVER lay the lamp face down on the lens. Instead, rotate the light over 180 degrees on its stand so it faces upside down, and change the battery from that angle.

*WARNING* PLACING LAMP FACE DOWN WHEN THE LENS IS HOT WILL CAUSE DAMAGE AND CAN CAUSE FIRE!

Always ensure you use the correct adaptor for the brand of power tool battery you are using. Never force the wrong adaptor onto another brand of battery, as this will cause damage and void warranties.

The battery compartment cover provides IP65 dust and waterproofing. However, with some larger 6Ah batteries, the cover may not fit correctly, potentially reducing the waterproofing level.

Power Lead

The included 24V 2.7A power lead can power the MTB-5300 as a mains-powered lamp even without a battery installed. In this configuration, the 25% green battery level light will illuminate as a 'default' indicator, which can be ignored.

This power lead also supplies power to the powerbank port, enabling charging of other devices while the lamp is in use, even without a battery installed.

The power lead can also function as a charger. HOWEVER, this charging capability is exclusively for the Unilite 14.8V 5.2Ah battery. The power lead will not charge any other brand of battery. Other battery brands must be charged using their respective chargers.

Advice & Important Information

• LEDs generate heat when switched on. Do not touch the LED area and never place the unit face down on any surface, as this poses a fire risk. Even after switching off, the LED/lens may remain hot/warm for a period.
• Do not look directly at the LED.
• Do not operate in direct sunlight or under extreme temperature conditions (below 14°F [-10°C] or above 104°F [40°C]).
• Do not use the device if any visible damage is present.
• Exercise caution when using the power lead. Always check for damage first. Use only the supplied power lead, as differing voltages can cause damage. Never remove the power lead from the mains socket with wet hands. Do not pull the cord; always grasp the plug unit.
• Children under 12 years of age should only use this product under adult supervision.
• Do not open, disassemble, or attempt to modify the product. Doing so will void the warranty and can be dangerous. Improper use or modification is not covered by the warranty.
• Prevent the lens from contacting hard or sharp objects, as damage or scratches will affect light output.
• This product is water resistant to IPX5 rating – DO NOT SUBMERGE. Exposure to excessive moisture or water may void the warranty.
• The product comes with a 1-year standard warranty against manufacturing faults and defects, commencing from the date of receipt. This can be extended to 2 years by registering online at WWW.UNILITE.CO.UK/WARRANTY. The warranty does not cover normal wear and tear, modifications, accidental damage, or poor maintenance. Unilite warranties do not cover battery leaks or damage caused by the use of incorrect batteries, power leads, or cables.
• Do not dispose of this device with normal household waste. It must be disposed of via an authorized electrical appliance disposal center or your local waste disposal unit.
• Please recycle packaging responsibly.
• Keep these instructions for future reference or for subsequent owners.

General Battery Advice

• New rechargeable batteries achieve full performance after a few complete charging and discharging cycles.
• To maintain rechargeable batteries in optimal condition, recharge them every 3-6 months, especially if stored for extended periods without use.
• Always fully charge batteries before storage.
• Always protect lithium batteries from heat, intense sunlight, fire, water, and moisture, as these conditions pose a danger of explosion.
• If a battery is damaged, fluids may leak out. AVOID contact, as this can lead to skin irritation and/or burns. If skin contact occurs, rinse thoroughly with water. If irritation persists, seek medical advice. Seek immediate medical assistance if lithium battery fluid comes into contact with the eyes.