AI Translation Earbuds USER MANUAL

Specifications

• Item No.: SX-219
• Wireless: 5.3
• Speaker: 13*3.0 hollow composite horn
• Frequency Response: 20Hz-20KHz
• Audio Output: 119±3dB
• Battery: Rechargeable Lithium Polymer Battery
• Charging Case: 300mAh, Earphones: 35mAh*2
• Playtime: Earphones 6 hours (60% volume), Case 15 hours (Full Battery)
• Input: DC-5V/300mA
• Charging Time: 1.5h (earbuds); 1.5h (charging case)
• Range: 30+ft
• Protocols: HSP / HFP / A2DP / AVRCP
• Codecs: AAC/SBC
• Weight: 41g (8g for earphones + 33g for charging case)
• IP Rating: IPX4 (earphones only)
• Accessories: Wireless earphones, Charging Case, Type-C Charging Cable

Pairing

Pairing Mode

For first-time connection, open the charging case. The earphones enter pairing mode automatically. Search for SX-219 and choose to connect. A prompt appears after the earphones are connected successfully. The next time you turn them on, the earphones will connect automatically with the last device.

Manual Pairing

If automatic pairing is not successful (single earphone with no sound or earphones are disconnected), you can perform manual connection:

1. Turn off the phone's wireless.
2. Take the earphones out after putting them into the charging case or after 10 seconds, and wait for 5 seconds.
3. Turn on the phone's wireless and search for SX-219 to connect.

Touch Operation

Illustration shows a pair of wireless earbuds and their charging case.

Diagram illustrating touch control points on the earbud:

• 1. Left Earphone
• 2. Touch Button
• 3. Audio Receiving Hole
• 4. Right Earphone
• 5. Charging Case

Controls:

• Previous song: Triple tap left/right.
• Next song: Double tap left/right.
• Play/Pause: Single tap left/right.
• Answer call/Hang up: Double tap left/right.
• Reject call: Long press left/right.
• Voice Assistant: Hold left.
• Game/music mode switch: Hold right.

Charging Indicator Light

• Charging: Red light flashing.
• Fully charged: Red light on.
• Low battery: Blue light flashing.

Illustration of the charging case showing the Type-C charging port and the charging indicator light.

Note: Earphones can be fully charged 3 times by the full battery case.

Easy Operation

Before using the translation function, ensure the translator earbuds are wirelessly connected to your mobile phone and download the "Wooask" APP.

APP Download

Search "Wooask" in the application store and download.

Screenshot of the app store showing the 'Wooask-Offline translation' app with an 'Open' button.

Registration and Login

Sign up to get an ID (only the first time) to start using the translation function.

Screenshot of the Wooask app login screen with fields for email, password, and buttons for 'Sign In', 'Visitor login', and 'Register a new account'.

Five Translation Modes

Connect the translation headset to the mobile phone via Bluetooth, and choose from the following 5 translation modes according to different application scenarios:

• Touch Control Mode: Two people wear one earphone each. Click or double-click the earphone to translate in real-time. Suitable for acquaintances who are willing to wear your earphone.
• Speaker Mode: One person wears earphones, and the other holds the mobile phone. Suitable for strangers who are not convenient to wear your earphones.
• Free Talk Mode: Both people wear an earphone. Real-time translation, release their hands, and communicate freely.
• Photo Translation: Translate text as you shoot, supporting both real-time photo translation and importing photos for translation.
• Offline Mode (Paid to Use): Can translate without internet. Supports 8 languages: Chinese, English, Japanese, Korean, Russian, German, French, Spanish real-time offline language translation.

Visual representation of translation modes with icons: Touch Mode, Speaker Mode, Free Talk Mode, Photo Translation, Offline Mode, each with a 'start' button.

Precautions

The translation accuracy mainly depends on the recognition accuracy. Each sentence's pronunciation should be correct, clear, with appropriate pauses.

If earphones cannot accurately understand the translation, try using a different expression.

When there is no internet or the network is poor, you can use offline mode (offline translation with limited languages, with slightly lower accuracy than online translation mode).

If earphones need to be given to someone else to use while bound, please be sure to "Unbind" first from the APP, in order not to affect other people's normal use.

Unbind Steps:

1. Enter the APP, click "Translation Earphones".
2. Click the upper right corner "Menu" button.
3. Click "Unbind" to unbind the device. The next user can then download the APP and use the translator earphones again.

Prompt indicating 'Click to enter the unbinding page'.

Trouble Shooting

If there is no sound on one side of the earphone or the earphone is disconnected, etc., the earphone may be in automatic pairing state. Manual pairing is not required, and the device will automatically connect.

Unconnected/Reconnected Wireless Device:

1. Enter your device's wireless settings and delete or ignore "SX-219". (See Picture A).
2. Turn off the Wireless function (See Picture B), then put the earphones into the charging case and close the lid. Wait for one minute. Take out the earphones (keep the distance between the two earphones within 20CM) and wait for 30 seconds.
3. Reopen the mobile phone wireless and search and connect to "SX-219".

Image A shows a mobile phone's Bluetooth settings screen. Image B shows closing the charging case lid and taking out the earphones.

Precautions

• Do not charge using unofficial means to avoid fire, explosion, or other dangers.
• Do not deliberately drop, burn, pierce, squeeze, or immerse the product in liquid to avoid equipment damage.
• Do not expose the product to high temperatures or around heating equipment (such as inside or outside a microwave oven or oven).
• Please use this device within the temperature range of 0 to 35 degrees Celsius. If the ambient temperature is too high or too low, it will cause equipment failure.
• The company is not responsible for any quality problems, equipment failures, and safety accidents caused by privately disassembling the earphones and using accessories not recognized by the official.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.