Electricity Kit For DC & AC
Instruction Sheet
Product Code: EM1763-010
Description
The IEC "Electricity Kits" contain all the instruments and parts for the extensive teaching of both DC and AC theory. No other parts are required from the classroom.
The kit is housed in a strong aluminium carry case with foam compartments for each component. The IEC Electricity Kit is self-contained and requires no additional equipment. Each component part is strong and well designed for a long life in the hands of students.
This Kit is viewed as the preferred electrical training tool for both High Schools and Technical and Trade Colleges.
- All parts are always available separately to make up for any losses of components over the many years of service.
- Variations to the contents of this kit can be arranged.
- IEC has produced an extensive set of experiments to go with the Electricity kit. Each experiment is explained in detail and is shown as a schematic image.
- A second image is provided for each experiment displaying the equipment physically connected with the cables from the kit.
- The students can work with the experiment manuals without close supervision.
- A useful Glossary is provided, explaining all the technical terms used in the experiments.
Dimensions: Length: 485mm, Width: 420mm, Height: 170mm
Weight: 11.4kg
Contents of the "IEC Electricity Kit"
| Quantity | Component |
|---|---|
| 1 | Power Supply & cable. 220 / 240V AC to 2, 4, 6, 8, 10, 12V AC & DC. 5 to 6 amps. Auto overload switch. |
| 1 | Signal Generator & cable. 220 / 240V AC. LED Digital, providing Sine, Square, Triangle and Sawtooth waveforms. From 0.1 Hz to 100 kHz. |
| 1 | Set of 12x connection cables fitted with moulded-on 4mm banana plugs. |
| 1 | Small dissectible transformer with "U" and "I" core of laminated iron. |
| 1 | Set of 4x removable, colour coded coils. 1x 300 Turns, 2x 600 Turns, 1x 1200 turns to fit the iron core to create transformers and inductors. |
| 3 | Multimeters for both AC & DC. Large LCD display, Auto power off, heavy duty style. Current up to 20 amps and with capacitance measurement. |
| 1 | AC / DC Motor / Generator, Hand driven with commutator and slip-rings. |
| 1 | Set of 3x plain iron cores for magnetic experiments. |
| 1 | Aluminium disc and axle for eddy current brake experiments. |
| 2 | Cell holders for "D" cells for some experiments requiring battery. |
| 2 | Plastic supports for holding Iron Cores to "U" core. |
| 1 | Pair of strong "Alnico" magnets. |
| 1 | Set of 3 Magnetic demonstrators to show magnetic fields. |
| 1 | Vial containing 10 plotting compasses and 20 MES lamps. |
| 1 | Vial containing roll 100m of copper wire 0.2mmD, roll 100m "Constantan" resistance wire 0.2mmD, roll 50m of 1 amp fuse wire 0.05mmD. 4 wires for sockets in the multimeter, 2 paper clips for connectors. |
| 1 | Vial containing 4 alligator clips can also fit to 4mm banana plugs. 4 alligator clips fitted with banana plugs, 2 electrode plates, copper & zinc. 2 conductivity plates s/steel, size 70x20mm, Thompson's Ring, Compass for determining north and south poles for experiments. |
| 1 | Set of components: 1x Potentiometer, 2x resistors each 50 ohm, 100 ohm, 500 ohm, 2 capacitors each 5uF and 10uF. 3 lamp holders for MES lamps, 1 switch single pole, one way, 1 switch single pole 2 way, 1 connector box. |
| 1 | Set of DC experiments and set of AC experiments complete with a very useful Glossary and teaching information. |
