User Manual
Thank you for purchasing AGPTEK reflective stickers. Please read this manual before use for optimum results. If you have any questions during the purchase or use, please do not hesitate to contact our customer service asap. E-mail: support@agptek.com
Using Steps
Step 1: Clean the surface and dry
[Image Description: A hand is shown cleaning a car surface with a white cloth.]
Step 2: Peel off the backing paper
[Image Description: A hand is peeling off the backing paper from a reflective sticker, revealing the adhesive side. Multiple stickers are stacked on the backing paper.]
Step 3: Slowly paste the sticker from side to side
[Image Description: A hand is carefully applying a reflective sticker to the car surface, moving it slowly from one side to the other to ensure smooth adhesion.]
Step 4: Press it for 10-20 seconds after pasting and do not rinse it within 24 hours
[Image Description: A hand is pressing down on an applied reflective sticker (shaped like a star) for several seconds to ensure it adheres well.]
