Owner's Manual for Traxxas models including: TRX-4MT Monster Trucks, TRX-4MT, Monster Trucks, Trucks
File Info : application/pdf, 3 Pages, 637.80KB
DocumentDocumentTRX-4MTTM 1/18 1979 Chevrolet® K10 Monster Truck (Model 98064-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Axle Components Body & Accessories (1979 Ford® F-150® Truck) 9787-BLUE Axle cover, 6061-T6 aluminum (blue-anodized) (2)/ 1.6x12mm 9844X Body conversion kit, 1/18 scale TRX-4MTTM Bigfoot® No. 1 BCS (with threadlock) (8) (includes front grille, engine detail & decals) (fits #9812 body) 9787-GRAY Axle cover, 6061-T6 aluminum (dark titanium-anodized) (2)/ 9812 Body, Ford F-150 Truck (1979), complete (unassembled) (white, 1.6x12mm BCS (with threadlock) (8) requires painting) (includes grille, side mirrors, door handles, 9787-GRN Axle cover, 6061-T6 aluminum (green-anodized) (2)/ 1.6x12mm roll bar, windshield wipers, side trim, & clipless mounting) BCS (with threadlock) (8) (requires #9834 front & rear bumpers) 9787-ORNG Axle cover, 6061-T6 aluminum (orange-anodized) (2)/ 1.6x12mm 9812-BLK Body, Ford F-150 Truck (1979), complete, black (includes grille, BCS (with threadlock) (8) 9787-RED Axle cover, 6061-T6 aluminum (red-anodized) (2)/ 1.6x12mm BCS side mirrors, door handles, roll bar, windshield wipers, side trim, & clipless mounting) (requires #9834 front & rear bumpers) (with threadlock) (8) 9812-BLUE Body, Ford F-150 Truck (1979), complete, blue (includes grille, 9787 Axle cover, brass (8 grams each) (2)/ 1.6x12mm CS (with threadlock) (8) side mirrors, door handles, roll bar, windshield wipers, side trim, & clipless mounting) (requires #9834 front & rear bumpers) 9738-BLKCR Axle cover, front or rear (black chrome) (2) 9738 Axle cover, front or rear (black) (2) 9738-BLUE Axle cover, front or rear (blue) (2) 9738-CHR Axle cover, front or rear (chrome) (2) 9738-GRAY Axle cover, front or rear (gray) (2) 9738-RED Axle cover, front or rear (red) (2) 9738-SATIN Axle cover, front or rear (satin chrome) (2) 9741 Axle housing, front & rear 9729X Axle shaft, front (hardened steel) (1) 9730X Axle shaft, rear (hardened steel) (1) 9756 Axle shafts, front (2), rear (2)/ stub axles, front (2) (hardened steel)/ 1.5x7.8mm pins (2)/ 1.5x6mm pins (4)/ cross pins (2) 9729 Axle shafts, front, outer (2) 9730 Axle shafts, rear, outer (2) 9743 Axle, front (assembled)/ M2.5x0.45 NL (2) 9744 Axle, rear (assembled)/ M2.5x0.45 NL (2) 9754 Rebuild kit, constant-velocity driveshaft (includes pins for 2 driveshaft assemblies) (for front driveshafts or #9751 metal center driveshafts) 9777 Ring gear, axle (2)/ pinion gear, axle (2) 9779 Ring gear, axle (2)/ pinion gear, axle (2) (metal) 9765 Skidplate, axle, front or rear (stainless steel) (2) 9753 Stub axle, front (2)/ cross pins (2)/ drive pins (4) 9812-BRWN Body, Ford F-150 Truck (1979), complete, brown (includes grille, side mirrors, door handles, roll bar, windshield wipers, side trim, & clipless mounting) (requires #9834 front & rear bumpers) 9812-GRN Body, Ford F-150 Truck (1979), complete, green (includes grille, side mirrors, door handles, roll bar, windshield wipers, side trim, & clipless mounting) (requires #9834 front & rear bumpers) 9812-RED Body, Ford F-150 Truck (1979), complete, red (includes grille, side mirrors, door handles, roll bar, windshield wipers, side trim, & clipless mounting) (requires #9834 front & rear bumpers) 9812-WHT Body, Ford F-150 Truck (1979), complete, white (includes grille, side mirrors, door handles, roll bar, windshield wipers, side trim, & clipless mounting) (requires #9834 front & rear bumpers) 9844 Decal sheet, 1/18 scale TRX-4MTTM Bigfoot® No. 1 9899 Decal sheet, 1/18 scale TRX-4MTM Ford F-150 Monster Truck (1979) 9829 Decal sheet, 1/18 scale TRX-4MTM Ford F-150 Truck (1979) 9828 Decal sheet, Ford F-150 Truck (1979) 9816 Door handles (left & right)/ mirrors, side (left & right)/ windshield wipers (fits #9812 body) 9858 Engine detail, / trimming template (for #9811 & 9812 series bodies) 9857 Engine detail, 1/18 scale TRX-4MTTM Bigfoot® No. 1/ trimming template (for #9812 body) 9850 Front grille, 1/18 scale TRX-4MTTM Bigfoot® No. 1/ tailgate panel (blue)/ LED lenses (rear, left & right) (fits #9812 body) 9753X Stub axle, front (hardened steel) (1) 9819-BLK Front grille/ tailgate panel (black)/ LED lenses (rear, left & right) Bearings & Bushings 9745X Ball bearing kit, black rubber sealed, complete (3x6x2.5mm (8), 5x8x2.5mm (4), 4x8x3mm (4), 8x12x3.5mm (2), 3.5x7x2.5mm (4)) 9745R Ball bearing kit, transmission, black rubber sealed (contains 3x6x2.5mm bearings (6)) 9745 Bushing kit, self-lubricating, complete (3x6x2.5mm (8), 5x8x2.5mm (4), 4x8x3mm (4), 8x12x3.5mm (2), 3.5x7x2.5mm (4)) Body & Accessories (1979 Chevrolet® K10 Truck) (fits #9812 body) 9819-BLUE Front grille/ tailgate panel (blue)/ LED lenses (rear, left & right) (fits #9812 body) 9819-BRWN Front grille/ tailgate panel (brown)/ LED lenses (rear, left & right) (fits #9812 body) 9819-GRN Front grille/ tailgate panel (green)/ LED lenses (rear, left & right) (fits #9812 body) 9819-RED Front grille/ tailgate panel (red)/ LED lenses (rear, left & right) (fits #9812 body) 9811 9811-BLK Body, Chevrolet K10 Truck (1979), complete (unassembled) (white, requires painting) (includes grille, side mirrors, door handles, roll bar, windshield wipers, & clipless mounting) (requires #9835 front & rear bumpers) Body, Chevrolet K10 Truck (1979), complete, black (includes grille, side mirrors, door handles, roll bar, windshield wipers, & clipless mounting) (requires #9835 front & rear bumpers) 9819-WHT 9819 9825 9823 Front grille/ tailgate panel (white)/ LED lenses (rear, left & right) (fits #9812 body) Front grille/ tailgate panel (white, requires painting)/ LED lenses (rear, left & right) (unassembled) (fits #9812 body) Latch, body mount, front (1)/ rear (1) (for clipless body mounting) (attaches to #9812 body) LED lenses, body, front & rear (complete set) (fits #9812 body) 9811-BLUE Body, Chevrolet K10 Truck (1979), complete, blue (includes 9862X grille, side mirrors, door handles, roll bar, windshield wipers, & Roll bar (assembled with LED lights) (fits #9811 or 9812 series bodies) clipless mounting) (requires #9835 front & rear bumpers) 9862 Roll bar (assembled) (fits #9811 or 9812 series bodies) 9811-RED Body, Chevrolet K10 Truck (1979), complete, red (includes grille, side 9824 Side trim, left & right (chrome) (fits #9812 body) mirrors, door handles, roll bar, windshield wipers, & clipless mounting) 9815 Windows, body (fits #9812 body) (requires #9835 front & rear bumpers) 9815X Windows, body (tinted) (fits #9812 body) 9898 9827 9817 Decal sheet, 1/18 scale TRX-4MTM Chevrolet K10 Monster Truck (1979) Decal sheet, 1/18 scale TRX-4MTM Chevrolet K10 Truck (1979) Door handles (left & right)/ mirrors, side (left & right)/ windshield wipers (fits #9811 body) 9836 9847 9765 Bumpers & Skidplates Bumper mount (front (1)/ rear (1)) (fits #9835 bumpers) Bumper, front (1)/ rear (1) (fits TRX-4MTTM with #9811 body) Skidplate, axle, front or rear (stainless steel) (2) 9858 Engine detail, / trimming template (for #9811 & 9812 series bodies) 9860 Skidplate, center 9820 9813 9818 9862X 9862 9814 9814X Front grille/ tailgate panel/ LED lenses (rear, left, & right) (fits #9811 body) Latch, body mount, front (1)/ rear (1) (for clipless body mounting) (attaches to #9811 body) LED lenses, body, front & rear (complete set) (fits #9811 body) Roll bar (assembled with LED lights) (fits #9811 or 9812 series bodies) Roll bar (assembled) (fits #9811 or 9812 series bodies) Windows, body (fits #9811 body) Windows, body (tinted) (fits #9811 body) 9727 9836 9840 9739-BLUE 9739-GRAY 9739-GRN 9739-ORNG 9739-RED Chassis & Attachments Battery strap Bumper mount (front (1)/ rear (1)) (fits #9835 bumpers) Chassis rails, 220mm (steel) (left & right) Servo mount, 6061-T6 aluminum (blue-anodized) Servo mount, 6061-T6 aluminum (dark titanium-anodized) Servo mount, 6061-T6 aluminum (green-anodized) Servo mount, 6061-T6 aluminum (orange-anodized) Servo mount, 6061-T6 aluminum (red-anodized) For assistance, call 1-888-TRAXXAS, or e-mail Traxxas anytime at support@Traxxas.com REV. 241011 0316 Page 2 TRX-4MTTM 1/18 1979 Chevrolet® K10 Monster Truck: TQ 2.4 GHz Radio (Model 98064-1) Parts List 9739 9831 9855 9852-BLUE 9852-GRAY 9852-GRN 9852-ORNG 9852-RED 9746 9746X 9883 9786 9839 9785 2064R 9793-BLUE 9793-GRAY 9793-GRN 9793-ORNG 9793-RED 9775 2063R 9740 9739 2065R 6250 2821 6548 2914 9767 6516 98064-1 5031 5032 5033 5034 5035 5036 5037 5029 5038X 5038 Servo mount, steering/ servo horn Shock mounts, dual, front & rear (left & right, upper & lower) Driveline Components 9763-BLUE Driveshafts, center, assembled (front & rear) (fits 1/18 scale TRX- 9763-GRAY 4MTM vehicles with 161mm wheelbase) Driveshafts, center, female, 6061-T6 aluminum (blue-anodized) 9763-GRN (front & rear) (for use with #9751 metal center driveshafts) (fits 1/18 TRX-4MTM vehicles with 162mm wheelbase) 9763-ORNG Driveshafts, center, female, 6061-T6 aluminum (dark titanium- anodized) (front & rear) (for use with #9751 metal center 9763-RED driveshafts) (fits 1/18 TRX-4MTM vehicles with 162mm wheelbase) Driveshafts, center, female, 6061-T6 aluminum (green-anodized) 9761A (front & rear) (for use with #9751 metal center driveshafts) (fits 9762 1/18 TRX-4MTM vehicles with 162mm wheelbase) Driveshafts, center, female, 6061-T6 aluminum (orange-anodized) 9762A (front & rear) (for use with #9751 metal center driveshafts) (fits 9764 1/18 TRX-4MTM vehicles with 162mm wheelbase) 9764-BLUE Driveshafts, center, female, 6061-T6 aluminum (red-anodized) (front & rear) (for use with #9751 metal center driveshafts) (fits 9764-GRAY 1/18 TRX-4MTM vehicles with 162mm wheelbase) Hardware 9764-GRN Hardware kit, complete (contains all hardware used on 1/18 scale TRX-4MTM) (includes clear plastic storage container) 9764-ORNG Hardware kit, stainless steel, complete (contains all stainless steel hardware used on 1/18-scale TRX-4MTM) (includes body 9764-RED hardware and clear plastic storage container) LED Lights 9757 9758 Pro Scale® LED light set, front & rear, complete (includes light harness, zip ties (6)) (fits #9811 body) Wire harness, LED lights (front)/ zip ties (2) 9759 9760 Wire harness/ mount (for #9790 trailer LED light kit) Motors & Electronics 9757 9758 ECM-2.5 Electronic Control Module, waterproof (low voltage detection, fwd/rev/brake) Gear set, metal (for 2065R waterproof sub-micro servo) 9759 9760 Heat sink, Titan® 87T motor (6061-T6 aluminum, blue-anodized) Heat sink, Titan® 87T motor (6061-T6 aluminum, dark titanium- 9733-BLUE anodized) 9733-GRAY Heat sink, Titan® 87T motor (6061-T6 aluminum, green-anodized) Heat sink, Titan® 87T motor (6061-T6 aluminum, orange- 9733-GRN anodized) 9733-ORNG Heat sink, Titan® 87T motor (6061-T6 aluminum, red-anodized) 9733-RED Motor, Titan® 87T (87-turn, 180 size)/ pinion gear, 11-tooth (metal) 9733 Servo case/gaskets (for 2065R metal gear, waterproof, sub-micro 9737-BLUE servo) Servo horn (metal) Servo mount, steering/ servo horn 9737-GRAY Servo, sub-micro, waterproof, metal gear TRX-4M® Brushless Power System, waterproof (includes ECM Brushless electronic control module (3-channel) and 3350Kv 9737-GRN brushless motor) Radio System, Batteries & Chargers 9737-ORNG 750mAh 7.4V 2-Cell 20C LiPo Battery Battery door, TQ 2.4 transmitter (replacement for #6516, 6517 transmitter) 9737-RED Battery, Power Cell AA Alkaline (4) Charger, iD® Balance, USB (2-cell 7.4 volt LiPo with iD® connector only) 9737 Transmitter, TQ 2.4GHz, 2-channel (transmitter only) Ready-To-Race Model TRX-4MTTM Monster Truck with 1979 Chevrolet® K10 Truck Body: 9732 9748-BLUE 1/18-Scale 4WD Electric Truck with TQ 2.4GHz Radio System Shock Oil 9748-GRAY Oil, shock (20 wt, 200 cSt, 60cc) (silicone) Oil, shock (30 wt, 350 cSt, 60cc) (silicone) Oil, shock (40 wt, 500 cSt, 60cc) (silicone) Oil, shock (50 wt, 600 cSt, 60cc) (silicone) Oil, shock (60 wt, 700 cSt, 60cc) (silicone) Oil, shock (70 wt, 900 cSt, 60cc) (silicone) Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone) Shock oil bottle (60cc) (for mixing shock oil) Shock oil set (includes 20 wt, 30 wt, 40 wt, 50 wt, 60 wt, 70 wt, & 80 wt premium shock oils with spinning carousel rack) Spinning carousel rack 9748-GRN 9748-ORNG 9748-RED 9842 Shocks Body, GTM shock, 6061-T6 aluminum (blue-anodized) (includes spring pre-load spacers) (2) Body, GTM shock, 6061-T6 aluminum (dark titanium-anodized) (includes spring pre-load spacers) (2) Body, GTM shock, 6061-T6 aluminum (green-anodized) (includes spring pre-load spacers) (2) Body, GTM shock, 6061-T6 aluminum (orange-anodized) (includes spring pre-load spacers) (2) Body, GTM shock, 6061-T6 aluminum (red-anodized) (includes spring pre-load spacers) (2) Lower retainer, shock, brass (1 gram each) (4) Rebuild kit, GTM shock (o-rings, spacers, bladders, bottom caps) (renews 2 shocks) Shock cap (2)/ spring perch (2)/ rod end (2)/ spring preload spacer (4) Shocks, GTM (assembled w/o springs) (2) Shocks, GTM, 6061-T6 aluminum (blue-anodized) (fully assembled w/o springs) (4) Shocks, GTM, 6061-T6 aluminum (dark titanium-anodized) (fully assembled w/o springs) (4) Shocks, GTM, 6061-T6 aluminum (green-anodized) (fully assembled w/o springs) (4) Shocks, GTM, 6061-T6 aluminum (orange-anodized) (fully assembled w/o springs) (4) Shocks, GTM, 6061-T6 aluminum (red-anodized) (fully assembled w/o springs) (4) Spring, shock (GTM) (0.072 rate) (1 pair) Spring, shock (GTM) (0.095 rate) (1 pair) Spring, shock (GTM) (0.123 rate) (1 pair) Spring, shock (GTM) (0.155 rate) (1 pair) Springs Spring, shock (GTM) (0.072 rate) (1 pair) Spring, shock (GTM) (0.095 rate) (1 pair) Spring, shock (GTM) (0.123 rate) (1 pair) Spring, shock (GTM) (0.155 rate) (1 pair) Steering Components Caster blocks, 6061-T6 aluminum (blue-anodized) (left & right) Caster blocks, 6061-T6 aluminum (dark titanium-anodized) (left & right) Caster blocks, 6061-T6 aluminum (green-anodized) (left & right) Caster blocks, 6061-T6 aluminum (orange-anodized) (left & right) Caster blocks, 6061-T6 aluminum (red-anodized) (left & right) Caster blocks, brass (4 grams each) (left & right) Steering blocks, 6061-T6 aluminum (blue-anodized) (left & right)/ 2.5x12mm BCS (with threadlock) (2)/ 2x6mm SS (with threadlock) (4) Steering blocks, 6061-T6 aluminum (dark titanium-anodized) (left & right)/ 2.5x12mm BCS (with threadlock) (2)/ 2x6mm SS (with threadlock) (4) Steering blocks, 6061-T6 aluminum (green-anodized) (left & right)/ 2.5x12mm BCS (with threadlock) (2)/ 2x6mm SS (with threadlock) (4) Steering blocks, 6061-T6 aluminum (orange-anodized) (left & right)/ 2.5x12mm BCS (with threadlock) (2)/ 2x6mm SS (with threadlock) (4) Steering blocks, 6061-T6 aluminum (red-anodized) (left & right)/ 2.5x12mm BCS (with threadlock) (2)/ 2x6mm SS (with threadlock) (4) Steering blocks, brass (7 grams each) (left & right)/ 2.5x12mm BCS (with threadlock) (2)/ 2x6mm SS (with threadlock) (4) Steering blocks, left & right/ caster blocks (c-hubs), left or right (2) Steering link, 6061-T6 aluminum (blue-anodized)/ servo horn, metal/ spacers (2)/ 3x6mm CCS (with threadlock) (1)/ 2.5x7mm SS (with threadlock) (1) Steering link, 6061-T6 aluminum (dark titanium-anodized)/ servo horn, metal/ spacers (2)/ 3x6mm CCS (with threadlock) (1)/ 2.5x7mm SS (with threadlock) (1) Steering link, 6061-T6 aluminum (green-anodized)/ servo horn, metal/ spacers (2)/ 3x6mm CCS (with threadlock) (1)/ 2.5x7mm SS (with threadlock) (1) Steering link, 6061-T6 aluminum (orange-anodized)/ servo horn, metal/ spacers (2)/ 3x6mm CCS (with threadlock) (1)/ 2.5x7mm SS (with threadlock) (1) Steering link, 6061-T6 aluminum (red-anodized)/ servo horn, metal/ spacers (2)/ 3x6mm CCS (with threadlock) (1)/ 2.5x7mm SS (with threadlock) (1) Suspension link set, complete (front & rear) (includes steering link (1), front lower links (2), front upper links (2), rear links (4)) (assembled with hollow balls) (fits 1/18 scale vehicles with long wheelbase) REV. 241011 0316 Page 3 TRX-4MTTM 1/18 1979 Chevrolet® K10 Monster Truck: TQ 2.4 GHz Radio (Model 98064-1) Parts List 7028 7028X 7059 9859 9842 9849 9916 2514 9917 9950 9909 9879 9867 9750 9750A 9750X 9880 9745R 9776 9776R 9776X 9747 9747X 9791 9791R 9791X 3433X 3433 3436 3432 3431 8712 8720 8721 8722 8710 8711 8719 8716 8716X 8715 8715X Suspension Linkage 8714 Hollow balls (20) Hollow balls, steel (machined) (22) 2748R Rod ends (8)/ hollow balls (8) (fits 1/16 and 1/18 accessory suspension links) Rod ends, long (8)/ hollow balls, steel (8) (for 1/18 scale TRX- 3415 4MTM vehicle accessory suspension links) Suspension link set, complete (front & rear) (includes steering link (1), front lower links (2), front upper links (2), rear links (4)) (assembled with hollow balls) (fits 1/18 scale vehicles with long wheelbase) Suspension link set, steel (includes 4x55mm front lower links (2), 4x48mm front upper links (2), 4x74mm rear lower or upper links (4)) Team Traxxas Items Backpack, RC car carrier, 12" x 12" x 24" (fits TRX-4 & similar) Decal sheet, racing sponsors Duffel bag, medium, 30" x 12" x 12" (fits 1/10 Slash®, TRX-4®, & similar) Official Team Traxxas® racing decal set(flag logo/ 6-color) Traxxas® racing banner, red & black (3x7 feet) Tires & Wheels Foam inserts, 3.0" (soft) (2) Tires & wheels, assembled (chrome 1.2" wheels, Terra Groove 3.0x1.0" tires) (2) Wheel hubs, 7mm hex (4)/ axle pins (8) Wheel hubs, 7mm hex (steel) (4)/ axle pins (8) Wheel hubs, 7mm hex, brass (1 gram each) (4)/ axle pins (8) Wheel weights, brass (31 grams per wheel) (2) Transmission Components Ball bearing kit, transmission, black rubber sealed (contains 3x6x2.5mm bearings (6)) Gear set, transmission, high range (trail) (16.6:1 reduction ratio)/ pinion gear, 11-tooth Gear set, transmission, low range (crawl) (40.3:1 reduction ratio)/ pinion gear, 11-tooth Gear set, transmission, speed (blue) (9.7:1 reduction ratio) Gearbox housing (front & rear)/ 2x4mm BCS (with threadlock) (2)/ 2x8mm BCS (4)/ 3x6x2.5mm bushings, self-lubricating (6)/ 3x16mm pins (2) Output shaft, transmission Transmission, complete (high range (trail) gearing) (16.6:1 reduction ratio) (assembled with ball bearings) (includes Titan® 87T motor) Transmission, complete (low range (crawl) gearing) (40.3:1 reduction ratio) (assembled with ball bearings) (includes Titan® 87T motor) Transmission, complete (speed gearing) (9.7:1 reduction ratio) (assembled with ball bearings) (includes Titan® 87T motor) Traxxas Tools Body reamer (aluminum handle) Body reamer (plastic handle) Cap, body reamer Scissors, curved tip Scissors, straight tip Speed Bit Essentials Set, hex and nut driver, 7-piece, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm) and nut drivers (5.0mm, 5.5mm, 7.0mm, and 8.0mm), 1/4" drive Speed bit handle, large (overmolded) Speed bit handle, medium (one piece) Speed bit handle, premium (rubber overmold) Speed Bit Master Set, hex and nut driver, 13-piece, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm), (ball-end: 2.0mm, 2.5mm, 3.0mm), and nut drivers (4.0mm, 4.5mm, 5.0mm, 5.5mm, 7.0mm, 8.0mm), 1/4" drive Speed Bit Master Set, hex driver, 7-piece straight and ball end, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm) (ball end: 2.0mm, 2.5mm, 3.0mm), 1/4" drive Speed Bit Master Set, nut driver, 6-piece, includes premium handle (medium), travel pouch, and nut drivers (4.0mm, 4.5mm, 5.0mm, 5.5mm, 7.0mm, 8.0mm), 1/4" drive Speed Bit Set, hex driver, 2-piece ball-end (2.0mm, 2.5mm), 1/4" drive Speed Bit Set, hex driver, 3-piece ball-end (2.0mm, 2.5mm, 3.0mm) 1/4" drive Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm, 2.5mm), 1/4" drive Speed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm, 2.5mm, 3.0mm), 1/4" drive Speed Bit Set, screwdriver, 3-piece straight (3mm slotted, #1 Phillips, and #2 Phillips bits), 1/4" drive Tool set (includes 1.5mm hex wrench / 2.0mm hex wrench / 2.5mm hex wrench/ 4-way wrench/ 8mm & 4mm wrench/ U-joint wrench) Tool set with pouch (includes 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4mm drivers/4mm. 5mm, 5.5mm, 7mm, and 8mm nut drivers/ 2mm, 3mm, and 4mm slotted screwdrivers/ #00 Phillips, #0 Phillips, and #1 Phillips screwdrivers/ 4mm and 8mm wrenches/ driver handle) If you have questions or need technical assistance, call Traxxas at: 1-888-TRAXXAS (1-888-872-9927) (U.S. residents only) For orders, calls outside the U.S., and other information, call 972-549-3000, or fax to 972-549-3011 e-mail Traxxas at support@Traxxas.com TRAXXAS.com REV. 241011 0316Dustin Hite Adobe PDF Library 24.3.212