Lutron Serena and Triathlon Wood Blinds
Lutron Serena and Triathlon Wood Blinds offer quiet, precision control with an Electronic Drive Unit (EDU) housed in the headrail. The EDU provides independent control of tilt, allowing users to store and recall preset tilt angles with a button press. Cordless manual lift and lower enables positioning the blind at any height.
Features
- Single blinds available in widths up to 72 in (1829 mm) and heights up to 72 in (1829 mm).
- System width up to 96 in (2438 mm) is possible when configured as 2 blinds under one valance.
- Provides maximum window coverage with minimal light gaps (1/4 in or 6 mm from slat ends to window frame).
- Tilt can be adjusted for varying privacy/view levels at any blind position.
- Slats move to a pre-determined tilt angle when a stored preset is recalled.
- Multiple presets can be defined for a single blind or a group of blinds.
- Slats are made from stable, high-quality North American basswood, available in various painted and stained finishes.
- Two optional valance styles are available.
- Simple installation for both inside and outside mount applications.
- Low-profile mounting brackets and EDU controls minimize light gap at the top of the headrail.
- Blind components are designed for ultra-quiet operation (tilt operation does not exceed 44 dBA measured 3 ft or 1 m from EDU).
- Battery-powered, wired power, and manual tilt models are available.
- The EDU maintains consistent tilt speed throughout the battery life cycle by monitoring battery voltage and compensating for mechanical load variations.
- Built-in wireless communication uses Clear Connect Type A technology, providing a control range of 30 ft (9 m).
- Compatible with handheld Pico wireless remote control and the Lutron 4-Group blind wireless remote control.
- In Lutron systems, blinds can be controlled by Natural Light Optimization, which automatically tilts blinds to preset angles to diffuse sunlight and maximize daylight comfort.
Diagram: Wood Blind with Morgan Valance
A visual representation of a wood blind with a Morgan valance, illustrating its structure and dimensions.
Compatible Controls
Serena Models
- Pico Wireless Control
- 4-Group RF Shade Remote Control
- Caséta
Triathlon Models
- Pico Wireless Control
- 4-Group RF Shade Remote Control
- Caséta PRO
- RA2 Select
- RadioRA 3
- HomeWorks systems with QSX processors
Specifications
Safety
- Fully compliant with WCMA safety guidelines for window treatments.
Regulatory
- cULus Listed
- FCC (USA)
- IC (Canada)
- UKCA (United Kingdom)
- CE (European Union)
- NOM (Mexico)
Ratings
- Operating voltage: Low-voltage Class 2 or equivalent, 6-12 V.
- Power must be derived from a Lutron approved NEC® Class 2 power source, which provides surge and Electro Static Discharge (ESD) protection.
- Operating wattage: 5 W.
- Tilt Speed: 68.5°/Second.
Environment
- Temperature: 30 °F to 104 °F (0 °C to 40 °C).
- For indoor use only.
- Relative Humidity: <90% non-condensing.
Dimensions
Installed Blind (inside mount)
- Window frame depth must be at least 2 in (51 mm) for inside mount applications.
- Window frame depth must be 35% in (92 mm) or more to fully recess the blind in the window frame.
- Refer to Application Note #752 for information about specifying valance returns for inside mount applications.
Diagrams illustrating inside mount dimensions, showing clearances and deductions.
Installed Blind (outside mount)
- System Profile: 3.50 in (89 mm).
- Window Trim/Valance Width: Valance is 1.5 in (38 mm) wider than the specified window dimension.
Diagrams illustrating outside mount dimensions, including system profile and window trim/valance width.
Two Blinds Under One Valance (inside mount shown)
Diagram illustrating the configuration of two blinds installed under a single valance.
Mounting Hardware
- Mounting Brackets (Left & Right): Dimensions provided for left and right brackets.
- Mounting Bracket (Combined Right/Left for 2 Blinds under 1 Valance): Dimensions provided for combined brackets.
- Center Support: Dimensions provided for the center support bracket.
- Bracket Spacer Block: Dimensions provided for the bracket spacer block.
- Hold Down Bracket: Dimensions provided for the hold down bracket.
Diagrams illustrating various mounting brackets and components with their respective dimensions.
Valance Options
Two valance styles are available for inside and outside mount applications: Morgan and Easton.
Inside Mount Valances
Diagrams showing the dimensions and profiles of the Morgan and Easton valances for inside mount.
- Maximum valance width: 96 in (2438 mm).
Valance With Returns
Valances can be specified with returns for outside mount and certain inside mount applications with partial recess. The standard return depth is 3.00 in (76.2 mm) from the back of the valance. Custom returns can be specified between 0.5 in (12.7 mm) and 4 in (101.6 mm). Refer to Application Note #752 for custom return specifications.
Diagrams illustrating standard and custom valance returns for Morgan and Easton styles.
Power Options
Battery Power
- Batteries are not included.
- Quantity requirement varies with blind size.
| Blind Width | Batteries Required |
|---|---|
| 20 in (508 mm) to 28 in (711 mm) | 12 AA Lithium |
| 28% in (714 mm) to 42% in (1070 mm) | 4 D-Cell Alkaline |
| 42 1/4 in (1073 mm) to 72 in (1829 mm) | 8 D-Cell Alkaline |
| 54 in (1372 mm) to 72 in (1829 mm) with Battery Boost option | 12 D-Cell Alkaline |
NOTES:
- Width ranges shown are for outside-mount blinds.
- Install new batteries, do not mix brands or types. A diagram on the battery holder shows correct orientation.
- For optimal battery life, Lutron recommends batteries from specific manufacturers. Visit lutron.com/optimizing-battery-life for details.
- Battery Boost option adds (4) batteries for extended battery life in larger blinds and high-use applications.
- For buildings with 20 or more Lutron Radio Powr Savr sensors, Lutron recommends powering blinds with a wired power supply.
Plug-in Power Supply*
Available separately:
- CSPS-P1-1-6-WH: Input: 100-240 V~50/60 Hz 400 mA, Output: 12 V 700 mA
- CSPS-P2-1-6-WH: Input: 100-240 V~50/60 Hz 0.3 A, Output: 12 V 0.5 A
- CSPS-P3-1-6-WH: Input: 100-240 V~50/60 Hz 0.35 A, Output: 12 V 0.7 A
Power Panel*
- 10-output power supply, CSPS-P1-10-6, available separately.
- Input Voltage: 120-240 V~
- Max. input current: 1.5 A
- Operating frequency: 50/60 Hz
- Output Voltage: 12 V
- Output Current: 5 A
- ESD Protection: (+/-) 16 kV
Diagram showing the CSPS-P1-10-6 power panel with its features.
*Blinds ordered with wired power include a 15 ft (4.5 m) power wire and must be connected to a Lutron power supply only. All secondary wiring must be of type CL2, CL2P, CL2R, CL2X or other cable with equivalent or better electrical, mechanical, and flammability ratings in accordance with local and national electric codes.
Replacement parts and kits are available. Contact Lutron Customer Service at +1.844.LUTRON1 for more information.
Lutron, Caséta, Clear Connect, Pico, RA2 Select, Radio Powr Savr, Serena, HomeWorks, Triathlon, and related trade dress and logos are trademarks or registered trademarks of Lutron Electronics Co., Inc. in the U.S. and/or other countries.
