BAS-IP AV-03D Entrance Panel User Manual

Main Features

• Panel type: Individual.
• Camera: 1/4".
• Resolution: 2 Mp.
• Camera angle: 90° (horizontal).
• Output video: HD (1280 × 720), H.264 Main Profile.
• Night backlight: 6 LEDs.
• Light sensitivity: 0.01 Lux.
• Protection class: IP64.
• IK-Code: IK06.
• Working temperature: -40 to +65 °C.
• Power consumption: 6.5 W, in standby 2.5 W.
• Power supply: +12 V DC, PoE 802.3af.
• Body: ABS plastic.
• Colors: Black, Silver.
• Size of the panel: 102 × 160 × 46 mm.
• Installation: Surface mount with and without a hood (brackets included).

Device Description

The BAS-IP AV-03D is a stylish panel designed to fit perfectly into the interior of any office center. The panel is made of high-quality plastic and can be used in almost any room.

Appearance

The front of the panel features the following components:

• 1 - Microphone
• 2 - Camera
• 3 - Backlight (6 LEDs)
• 4 - Loudspeaker
• 5 - Sensor call button

Completeness Check of the Product

Before installation of the outdoor panel, verify that it is complete and all components are available.

Outdoor Panel Kit Includes:

Electrical Connection

After verifying the device's completeness, proceed with the outdoor panel connection.

For Connection You Will Need:

• An Ethernet UTP CAT5 or higher cable connected to a network switch / router.

Cable Length Recommendations: The maximum length of the UTP CAT5 cable segment should not exceed 100 meters, according to the IEEE 802.3 standard.

• Power supply at +12 V, 2 amps, if there is no PoE.
• Wires for the connection of alarm loops and home automation (optional).

Any type of electromechanical or electromagnetic lock can be connected, provided the switched current does not exceed 5 Amps.

Connection Schemes:

Electromechanical Lock Connection:

This scheme shows the connection for an electromechanical lock using external power supplies for both the panel and the lock. The panel connects via LAN (PoE) and has terminals for Power/Switch Output, Exit Button/Door Magnetic, and Rs485 Interface. The lock is connected to the panel's power/switch output and its dedicated power supply.

Electromagnetic Lock Connection:

This scheme illustrates the connection for an electromagnetic lock, also using external power supplies for the panel and lock. The panel connects via LAN (PoE) and provides terminals for Power/Switch Output, Exit Button/Door Magnetic, and Rs485 Interface. The electromagnetic lock is connected to the panel's power/switch output and its power supply.

Mechanical Mounting

Before mounting the door panel, a hole or recess in the wall with dimensions of 20 mm (height) x 50 mm (width) x 60 mm (depth) must be provided. It is also necessary to provide supply for a power cable, additional modules, and the local network.

Mounting Components and Dimensions:

Niche: A wall recess is required with dimensions of 20 mm (height) x 50 mm (width) x 60 mm (depth).

Bracket with Hood: A mounting bracket, optionally with a hood to cover the top of the panel, is used for installation. Screws are provided for mounting.

Outdoor Panel: The panel itself is mounted onto the bracket.

Dimensions:

• Outdoor Panel: 102 mm (width) x 160 mm (height) x 46 mm (depth).
• Bracket with Hood: 111.3 mm (width) x 170.4 mm (height) x 73 mm (depth).

Warranty Information

Warranty:

Please fill in the following details on the warranty card: Model name, Serial number, Seller name.

The customer signature confirms familiarity with the warranty terms and that a functional test was performed.

Warranty Conditions:

• The warranty period is 36 months from the date of sale.
• The product must be in its original packaging or supplied as received from the seller for warranty repair.
• Warranty repair is accepted only with a properly filled warranty card and intact stickers or labels.
• The product may be accepted for examination according to legal provisions, provided it is in its original packaging, complete, with appearance matching new equipment, and all relevant documents are present.
• This warranty is in addition to statutory consumer rights and does not restrict them.

Terms of Warranty:

• The warranty card must include the model name, serial number, purchase date, seller's name, seller company stamp, and customer's signature.
• The buyer is responsible for delivering the product for warranty repair.
• Warranty repairs are performed only within the period specified on the warranty card.
• The service center aims to complete warranty repairs within 24 working days. Any time spent on restoring product functionality is added to the warranty period.

Notes

This section is provided for user notes.