Seculink Surveillance
Instruction Manual for SECULINK models including: D4-N50 4K POE Camera Outdoor Security, D4-N50, 4K POE Camera Outdoor Security, Camera Outdoor Security, Outdoor Security, Security
SECULINK 4K POE Camera Outdoor Security 8MP HD Color Night Vision Human Vehicle Detection Metal Case IP66 Waterproof TF Card Slot : Electronics & Photo
File Info : application/pdf, 4 Pages, 294.62KB
DocumentDocumentSECULINK POE Camera Operation Instruction Please read the instruction carefully before using, and keep it properly. Fit Models: D4-N50, D6-N80, F6-N20, F6-N50, F6-N80, F7-N50, F8-N20, F8-N50, ...... Need Help? Visit us online for up-to-date software and complete instruction manuals. SECULINK TECHNOLOGY (HK) LIMITED SHENZHEN SECULINK TECHNOLOGY CO., LTD Website: www.seculink.net E-mail: info@seculink.net Information in this document is subject to change without prior notice. As our products are subject to continuous improvement, SECULINK (SECUEYE) and our subsidiaries reserve the right to modify product design and specifications, without notice and without incurring any obligation CONNECTION AND SETUP POE (Power Over Ethernet) enables you to use just a single cable for both power and data transmission, allowing you to position your cameras anywhere without the need for a nearby power outlet. Plug and Play. Specification of Ethernet Cables SECULINK POE cameras support T-568B connectors and CAT5, CAT6, CAT7 with 8 PIN Ethernet cable. The maximum cable length that the POE camera supports is 100 meters (328 feet). Connecting to POE NVR SECULINK POE Camera (Non-APP) is an add-on POE camera, which cannot work independently. It works perfectly when connected to ONVIF POE NVR. Connect your POE camera to the POE NVR by a single network cable, then the POE camera will get power via the POE NVR. If you want to power it via POE switch, you need to make sure that the POE switch is 802.3at / 802.3af compliant (48V) and supports active mode. Adding to POE NVR Log into your SECULINK POE NVR and click on Quick Add to enter into the camera management interface. Then, click on Device Search to locate the IP address for your POE cameras that should be connected to the same network as your POE NVR. A list of all connected cameras will appear. Select the camera from the list by clicking on the checkbox, click Add to add the camera into the Added Devices menu. When it has been added, the camera will be ready to view on your POE NVR.