Installation Guide

Package Contents

• 1 × Canopy roof (PE fabric)
• 4 × Removable sidewalls (3 with windows, 1 with zipper door)
• 8 × Steel frame legs (with powder coating)
• Multiple × Connecting tubes and corner joints
• 1 x Set of stakes and ropes
• 1 × Carry bag

Tools Required

No tools required – assembly is tool-free.

Step 1: Unpack and Sort

• Unfold all parts and lay them out on a flat surface.
• Check all components against the package contents.

Step 2: Assemble the Frame

• Connect steel tubes to form the four vertical legs and horizontal support beams.
• Secure each connection with the push-button locking mechanism or extra fittings provided.

Step 3: Attach the Canopy Roof

• Place the canopy roof over the assembled frame.
• Align corners and secure the canopy with the Velcro straps or ties attached to the frame.

Step 4: Install Sidewalls

• Attach sidewalls to the frame using hook & loop fasteners.
• Position the 3 sidewalls with clear windows and the 1 zippered door according to your preference.
• Ensure all edges are securely fastened to prevent gaps.

Step 5: Secure the Tent

• Insert stakes through holes in the baseboards at each corner and side to anchor the tent to the ground.
• Tie ropes to the frame's attachment points and fasten them to stakes for extra stability.
• Optionally, use sandbags on the baseboards for additional weight (not included).

Step 6: Final Check

• Walk around the tent and verify all connections are secure.
• Adjust sidewalls or canopy tension as needed.

Disassembly and Storage

• Remove stakes and ropes.
• Detach sidewalls.
• Take off the canopy roof.
• Disconnect frame tubes.
• Store all components in the carry bag for easy transport.

Safety Tips

• Do not use the tent in severe weather conditions such as strong winds or heavy storms.
• Always secure the tent properly to avoid accidents.
• Keep away from open flames.