Axxess Integrate - Comprehensive Interface Products for Vehicle Upgrades
Loading...
Metra Online | Welcome to Metra Auto Parts Online Warehouse
Metra Online
Installation Guide for MeTra models including: 108-TO7HG, 108-TO7HG Toyota Highlander Up Pioneer Radio Kit, Toyota Highlander Up Pioneer Radio Kit, Highlander Up Pioneer Radio Kit, Pioneer Radio Kit, Radio Kit
Metra 108TO7HG 108-TO7HG 086429411306
File Info : application/pdf, 4 Pages, 178.07KB
DocumentDocument108-TO7HG INSTALLATION INSTRUCTIONS Patent Pending Toyota Highlander (Without factory 12.3 inch screen) 2020 Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle specific applications KIT FEATURES · Specifically designed for Pioneer 8" modular radios · Painted gloss black Refer to the radio manufacturer for current models TABLE OF CONTENTS Dash Disassembly..................................................2 Kit Assembly ..........................................................3 WIRING & ANTENNA CONNECTIONS (sold separately) Wiring Harness: 70-1765 non-amplified See metra-online.com or axxessinterfaces.com for audio and SWC interface options Antenna Adapter: 40-LX11 KIT COMPONENTS · A) Radio trim panels · B) Screen brackets · C) Radio chassis brackets A B C TOOLS REQUIRED · Panel removal tool · 10mm socket · Phillips screwdriver Metra. The World's Best Kits.® MetraOnline.com Attention! Let the vehicle sit with the key out of the ignition for a few minutes before removing the factory radio. When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 10/21/20 INST108-TO7HG 1. Unclip and remove the trim behind the radio. Remove (4) 10mm screws exposed. (Figure A) 2. Unclip, unplug, and remove the radio and panel. (Figure B) 3. Remove (4) Phillips screws securing the factory radio to the dash panel. (Figure C) Continue to Kit Assembly (Figure A) DASH DISASSEMBLY (Figure B) (Figure C) 2 1.800.221.0932 | MetraOnline.com Note: For steps 1 and 2, reference the installation manual provided with the radio for which hardware to use. The display screen and radio chassis use two different types of screws. 1. Secure the radio brackets to the radio chassis using (4) screws supplied with the radio. (Figure A) 2. Slide the radio chassis into to the dash, then secure using the factory screws. 3. Secure the radio display to the screen brackets using (6) screws supplied with the radio. (Figure B) 4. Place the radio trim panels into to the factory dash panel, then the radio screen assembly, and secure using the factory screws. (Figure C) (Figure A) (Figure B) KIT ASSEMBLY 5. Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or Axxess. Test the radio for proper operation. 6. Connect the radio display to the radio chassis. 7. Reassemble the dash in reverse order of disassembly to complete the installation. (Figure C) REV. 10/21/2020 INST108-TO7HG 3 Metra. The World's Best Kits.® MetraOnline.com 108-TO7HG INSTALLATION INSTRUCTIONS Having difficulties? We're here to help. Contact our Tech Support line at: 386-257-1187 Or via email at: techsupport@metra-autosound.com Tech Support Hours (Eastern Standard Time) Monday - Friday: 9:00 AM - 7:00 PM Saturday: 10:00 AM - 7:00 PM Sunday: 10:00 AM - 4:00 PM ® KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 10/21/20 INST108-TO7HG