ASSEMBLY INSTRUCTION
HOOKER FURNITURE
Product Information
- ITEM# 5820-90251-85: 5/0 Panel Headboard
- ITEM# 5820-90252-85: 5/0 Panel Footboard
- ITEM# 5820-90267-85: 6/0-6/6 Panel Headboard
- ITEM# 5820-90268-85: 6/0-6/6 Panel Footboard
- ITEM# 5820-90253-85: 5/0-6/6 Rail
- ITEM# 5820-90263-85: 6/0 Rail
Caution: Please make sure you have all parts indicated below prior to assembly. This bed is heavy and can best be assembled with the help of two or more people.
Hardware List
| NO. | HARDWARE LIST | Q'TY |
|---|---|---|
| E | NUT | 8 |
| F | SPANNER WRENCH | 1 |
| G | CURVED WASHER | 8 |
| H | FULL THREADED BOLT | 8 |
| K | SCREW | 20 (for 6/6&6/0 bed) / 16 (for 5/0 bed) |
| R | 4MM ALLEN WRENCH | 1 |
| Q | BOLT | 10 (for 6/6&6/0 bed) / 8 (for 5/0 bed) |
| V | LOCK WASHER | 10 (for 6/6&6/0 bed) / 8 (for 5/0 bed) |
| U | FLAT WASHER | 10 (for 6/6&6/0 bed) / 8 (for 5/0 bed) |
| M | 5MM ALLEN WRENCH | 1 |
Assembly Steps
Please note the hardware bag to assemble side rails to HB&FB is in the box of side rails.
Step 1: Attach Side Rails to Headboard/Footboard
Insert 2 bolts (H) into holes of each side post on Headboard (A) and Footboard (B). Attach the ends of side rails (C) to bolts (H) on posts by using 2 curved washers (G) and 2 nuts (E). Tighten nuts (E) securely with spanner wrench (F).
Diagram 1 Description: Shows the connection of a side rail (C) to a headboard/footboard post (A/B) using a full threaded bolt (H), curved washer (G), and nut (E), tightened with a spanner wrench (F).
Step 2: Attach Center Supports to Slats
Take out center supports (L) from the rail box. Attach center supports (L) to slats (D) by using 2 bolts (Q), 2 lock washers (V), and 2 flat washers (U). Secure bolts (Q) by using allen wrench (R).
Diagram 2 Description: Illustrates attaching a center support (L) to a slat (D) using bolts (Q), lock washers (V), and flat washers (U), secured with an Allen wrench (R).
Step 3: Attach Slats to Side Rails
Attach slats (D) to side rails (C), and tighten screws (K) on both ends of slats (D) to side rails (C).
Diagram 3 Description: Depicts attaching a slat (D) to a side rail (C) using screws (K).
Adjustments
Slat Height Adjustment
You can change the height of slats by adjusting the height of cleats on the side rail as shown in diagram 4. Remove bolts (I), lock washers (O), and flat washers (J) from the cleats by turning the bolts (I) with allen wrench (M) in an anti-clockwise direction. Adjust the cleats to a desired position, and then secure lock washers, flat washers, and bolts in a clockwise direction by turning with the allen wrench.
Diagram 4 Description: Shows adjusting the height of cleats on a side rail (C) by manipulating bolts (I), lock washers (O), and flat washers (J) using an Allen wrench (M).
Center Support Height Adjustment
You can adjust the height of center supports (L) as shown in diagram 5 to meet your needs by following these steps:
- Unscrew bolts on center supports (L) with allen wrench (R).
- Adjust the height of center supports, align holes on 2 pieces of wood, and tighten them together with 2 bolts (Q), 2 lock washers (V), and 2 flat washers (U) by turning with wrench (R) in a clockwise direction.
Diagram 5 Description: Details the adjustment of center supports (L) by loosening bolts (R), aligning holes on wooden components (D), and re-securing with bolts (Q), lock washers (V), and flat washers (U) using an Allen wrench (R).
Cleaning Instruction
Clean finished parts with a mild dishwashing liquid and water solution on a damp cloth. Polish the finish with a soft cloth and an industry-recognized furniture polish.