Instruction Manual for TELTONIKA models including: DAP140 Industrial Access Point, DAP140, Industrial Access Point, Access Point, Point

datasheet

UAB TELTONIKA NETWORKS ...

Copyright © 2025, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TE

DAP140

19 hours ago — user scripts, URL parameters, user groups, individual user or group limitations, user ... QSG (QUICK START GUIDE). Industrial Access point DAP140. 3-pin power ...


File Info : application/pdf, 13 Pages, 2.74MB

PDF preview unavailable. Download the PDF instead.

dap140-datasheet-v11
DAP140
v1.0
Copyright © 2025, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice.

HARDWARE
FRONT VIEW
BACK VIEW
POWER SOCKET PINOUT

DATASHEET - DAP140

Copyright © 2025, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB

TELTONIKA NETWORKS without prior notice.

2

FEATURES
Wireless Wireless mode WiFi security SSID/ESSID Wi-Fi users Wireless mesh/roaming
Wireless MAC filter Wireless QR code generator
TravelMate Ethernet LAN

DATASHEET - DAP140
IEEE 802.11b/g/n (Wi-Fi 4), Access Point (AP), Client (STA), Mesh (802.11s), Multi AP WPA-PSK, WPA2-PSK, WPA3-SAE, WPA-EAP, OWE, WPA2-EAP, WPA3-EAP SSID stealth mode and access control based on MAC address Up to 50 simultaneous connections Fast roaming (802.11r), Radio Resource Measurement (802.11k), BSS Transition Management (802.11v), Client isolation, Hide SSID, WMM Allowlist, blocklist Once scanned, a user will automatically enter your network without needing to input login information Forward Wi-Fi hotspot landing page to a subsequent connected device
2 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Copyright © 2025, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB

TELTONIKA NETWORKS without prior notice.

3

DATASHEET - DAP140

Network Routing
Network protocols
VoIP passthrough support Connection monitoring Firewall Firewall status page Ports management
Network topology
DHCP
QoS / Smart Queue Management (SQM)
DDNS DNS over HTTPS
Network backup Load balancing Hotspot
SSHFS VRF support Traffic Management

Static routing, Dynamic routing(RIP, OSPF, EIGRP, BGP, NHRP), Policy based routing, Routing rules
TCP, UDP, IPv4, IPv6, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SNMP, MQTT, Wake On Lan (WOL)
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Port forward, traffic rules, custom rules
View all your Firewall statistics, rules, and rule counters
View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
Visual representation of your network, showing which devices are connected to which other devices
Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
Supported >25 service providers, others can be configured manually
DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
Wi-Fi WAN, VRRP, Wired options, each of which can be used as an automatic Failover
Balance Internet traffic over multiple WAN connections
Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes
Possibility to mount remote file system via SSH protocol
Initial virtual routing and forwarding (VRF) support
Real-time monitoring, wireless signal charts, traffic usage history

Copyright © 2025, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB

TELTONIKA NETWORKS without prior notice.

4

Security Authentication
Firewall Attack prevention
VLAN WEB filter Access control SSL certificate generation 802.1x

DATASHEET - DAP140
Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator Preconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64 DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) Port and tag-based VLAN separation Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only Flexible access control of SSH, Web interface, CLI and Telnet Let's Encrypt and SCEP certificate generation methods Port-based network access control server

Copyright © 2025, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB

TELTONIKA NETWORKS without prior notice.

5

VPN OpenVPN OpenVPN Encryption
IPsec
GRE PPTP, L2TP Stunnel
DMVPN SSTP ZeroTier WireGuard Tinc
Tailscale
OPC UA Supported modes Supported connection types MODBUS Supported modes Supported connection types Custom registers
Supported data formats

DATASHEET - DAP140
Multiple clients and a server can run simultaneously, 27 encryption methods DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256 XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16) GRE tunnel, GRE tunnel over IPsec support Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program's code Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support SSTP client instance support ZeroTier VPN client support WireGuard VPN client and server support Tinc offers encryption, authentication and compression in it's tunnels. Client and server support. Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted pointto-point connections using the open source WireGuard protocol
Client, Server TCP
Server, Client TCP MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Copyright © 2025, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB

TELTONIKA NETWORKS without prior notice.

6

DATA TO SERVER Protocol Data to server
MQTT Gateway Modbus MQTT Gateway
DNP3 Supported modes Supported connection DLMS DLMS Support Supported modes Supported connection types COSEM API Teltonika Networks Web API (beta) support

DATASHEET - DAP140
HTTP(S), MQTT, Azure MQTT Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature
Allows sending commands and receiving data from MODBUS Server through MQTT broker
Station, Outstation TCP
DLMS - standard protocol for utility meter data exchange Client TCP Allows to scan meter COSEM objects for automatic detection and configuration
Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com

Copyright © 2025, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB

TELTONIKA NETWORKS without prior notice.

7

Monitoring & Management WEB UI
FOTA SSH Email TR-069
MQTT SNMP JSON-RPC MODBUS RMS IoT Platforms ThingWorx Cumulocity - Cloud of Things
Azure IoT Hub
AWS IoT Core
System Characteristics CPU RAM FLASH storage

DATASHEET - DAP140
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status Firmware update from server, automatic notification SSH (v1, v2) Receive email message status alerts of various services OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem MQTT Broker, MQTT publisher SNMP (v1, v2, v3), SNMP Trap, Brute force protection Management API over HTTP/HTTPS MODBUS TCP status/control Teltonika Remote Management System (RMS)
Utility to interact with Thingworx cloud platform Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP. Has reboot and firmware upgrade actions Can be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs Utility to interact with the AWS cloud platform. Jobs Support: Call the device's API using AWS Jobs functionality
Mediatek, 580 MHz, MIPS 24KEc 128 MB, DDR2 16 MB serial NOR flash

Copyright © 2025, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB

TELTONIKA NETWORKS without prior notice.

8

Firmware / Configuration WEB UI
FOTA RMS Keep settings Factory settings reset
FIRMWARE CUSTOMISATION Operating system Supported languages Development tools GPL customization
Package Manager Power Connector Input voltage range PoE (passive)
Power consumption Physical Interfaces Ethernet Status LEDs Power Antennas Reset Other

DATASHEET - DAP140
Update FW from file, check FW on server, configuration profiles, configuration backup Update FW Update FW/configuration for multiple devices at once Update FW without losing current configuration A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration
RutOS (OpenWrt based Linux OS) Busybox shell (ash), Lua 5.1, C, C++ SDK package with build environment provided You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients' needs The Package Manager is a service used to install additional software on the device
3-pos plugable terminal block 9-30 VDC, reverse polarity protection, surge protection >31 VDC 10us max Passive PoE over spare pairs. Possibility to power up through LAN2 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC Idle: 1 W / Max: 2 W
2 x RJ45 ports, 10/100 Mbps 2 x LAN type LED, 1 x Power LED 1 x 3-pin power connector 1 x RP-SMA for Wi-Fi Reboot/User default reset/Factory reset button 1 x Grounding screw

Copyright © 2025, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB

TELTONIKA NETWORKS without prior notice.

9

Physical Specification Casing material Dimensions (W x H x D) Weight Mounting options
Operating Environment Operating temperature Operating humidity Ingress Protection Rating
Regulatory & Type Approvals Regulatory

DATASHEET - DAP140
Aluminium housing 113,10 x 25 x 68,6 mm 142.3 g Integrated DIN rail bracket, wall mount, flat surface (additional kit needed)
-40 °C to 75 °C 10% to 90% non-condensing IP30
CE, UKCA, CB

Copyright © 2025, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB

TELTONIKA NETWORKS without prior notice.

10

ORDERING
STANDARD PACKAGE*

DATASHEET - DAP140

DAP140

3-PIN POWER CONNECTOR

QSG (QUICK START GUIDE)

Industrial Access point DAP140 3-pin power connector QSG (Quick Start Guide) Packaging box

*Standard package contents may differ based on standard order codes.
For more information on all available packaging options ­ please contact us directly.
CLASSIFICATION CODES
HS Code: 851762 HTS: 8517.62.00

AVAILABLE VERSIONS DAP140 0*****

N/A

DAP140000000 / Standard package

For more information on all available packaging options ­ please contact us directly.

DAP140 SPATIAL MEASUREMENTS

PHYSICAL SPECIFICATION Device housing (W x H x D)*: Box (W x H x D):

113,10 x 25 x 68,6 mm 141 x 28,2 x 74,5 mm
*Housing measurements are presented without antenna connectors and screws; for measurements of other device elements look to the sections below.

Copyright © 2025, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB

TELTONIKA NETWORKS without prior notice.

11

TOP VIEW The figure below depicts the measurements of device and its components as seen from the top:

DATASHEET - DAP140

RIGHT VIEW The figure below depicts the measurements of device and its components as seen from the right side:

FRONT VIEW The figure below depicts the measurements of device and its components as seen from the front panel side:

Copyright © 2025, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB

TELTONIKA NETWORKS without prior notice.

12

DATASHEET - DAP140
REAR VIEW The figure below depicts the measurements of device and its components as seen from the back panel side:
MOUNTING SPACE REQUIREMENTS The figure below depicts an approximation of the device's dimensions when cables and antennas are attached:

Copyright © 2025, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB

TELTONIKA NETWORKS without prior notice.

13



References

dompdf 2.0.4 CPDF