Led Lighting, Electrical and Hvac Supplier Ortech Industries
Instruction Manual for ORTECH models including: TF-2x2-3CCT W, TF-2x4-3CCT W, TF-2x2-3CCT W LED Troffer Panel Lights, TF-2x2-3CCT W, LED Troffer Panel Lights, Troffer Panel Lights, Panel Lights, Lights
Troffer Ortech TF-2x2-3CCT-W [Égalisation des prix] | Lumenco.ca
File Info : application/pdf, 3 Pages, 4.96MB
DocumentDocumentLED Troffer Panel Lights MODEL TF-2x2-3CCT+W | TF-2x4-3CCT+W Instruction Manual WARNING CAUTION WARNING -- THE INSTALLATION MUST BE CARRIED OUT BY A QUALIFIED ELECTRICIAN. 1. LED Back Lit Panels are suitable for using in dry and damp locations 2. Please keep the LED Back Lit Panels away from any corrosive substance, and please use dry cloth when you clean it 3. LED Back Lit Panels can only be installed by a qualified electrician 4. Before installation or maintenance, please disconnect the power to prevent electric shock 5. Make sure the distances between live part and metal part of LED troffer can satisfy reinforced or double insulation. PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES. Electrical products can cause death or injury, or damage to property. If in any doubt about the installation or use of this product, consult a competent electrician. INSTALLATION GUIDE 1.Unscrew the driver cover. 2.Connect the conduit to the driver box. 3.Connect other wires separately. 4.Put back the driver cover and fix it by screw. N(White) L(Black) Ground Wire(Green) Dim+(Purple) Dim-(Pink) CCT Switch Power Switch info@ortechindustries.com www.ortechindustries.ca 13376 Comber Way Surrey BC V3W 5V9 205 Summerlea Rd, Brampton, ON L6T 4E5 1-888-543-6473 1-888-541-6474 LED Troffer Panel Lights MODEL TF-2x2-3CCT+W | TF-2x4-3CCT+W RECESSED INSTALLATION 1.Replace existing lighting fixture from ceiling with LED Troffer. Instruction Manual 2.Replace existing lighting fixture from ceiling with LED Troffer. 3. Use the protective brackets for the sake of safety. info@ortechindustries.com www.ortechindustries.ca 13376 Comber Way Surrey BC V3W 5V9 205 Summerlea Rd, Brampton, ON L6T 4E5 1-888-543-6473 1-888-541-6474 LED Troffer Panel Lights MODEL TF-2x2-3CCT+W | TF-2x4-3CCT+W PNP-SENSOR-DS INSTALLATION 1.Remove the PC cover of the fixture, and take off the rubber plug fixed on the sensor of the Troffer body; Instruction Manual 5.After connecting the wires wel put back the terminal box lid and tighten a screw on the terminal box lid. 2.Connect the terminals of the sensor to the 12V terminal wire reserved in the lamp body by plugging it in N(White) L(Black) Ground Wire(Green) 6.Please use a protective bracket for safety. Finally, the installation for the sensor is complete. 3.Install the PC cover, the sensor installation is complete 4.Install the troffer on the celling with replacing the existing fixture on the celling; ORTECH reserves the right to modify at any time, without notice, any or all of our product's features, designs, components and specifications to meet market changes. info@ortechindustries.com www.ortechindustries.ca 13376 Comber Way Surrey BC V3W 5V9 205 Summerlea Rd, Brampton, ON L6T 4E5 1-888-543-6473 1-888-541-6474