Intruder Alarm Systems, Security Products | Arrowhead Alarm Products
Instructions for Arrowhead Alarm Products models including: PW WIEGAND-SK4 Proximity Reader, Proximity Reader, PW WIEGAND-SK4, Reader
PW WIEGAND-SK4 - Access Systems - Access Control - Arrowhead Alarm Products
File Info : application/pdf, 4 Pages, 2.86MB
DocumentDocumentPW WIEGAND-SK4 Proximity Reader Introduction The PW Wiegand-SK4 is a heavy duty wiegand output keypad, with proximity reader, compatible with 125KHz EM format card. The keypad is fully potted, and can function at extreme temperatures (-40 ~60), which allows it is capable to be mounted either indoor or outdoor. Specifications Operation Voltage Standby Current Frequency Card Type Read Range Output Format Operating Temperature Operating Humidity Color Index of Protection Dimension(H x W x T) 12~24V DC 50mA 125KHz EM card Up to 2.8 inches (7cm) AAP Custom 40-bit -40~60 10% to 95% RH Silver IP66 134 x 54 x 23mm Special Backlight Feature The PW Wiegand-SK4 device has the ability to automatically turn off its backlight after 20 seconds if no keys are pressed. To turn this feature Off press and hold the # key for 10 seconds. (the green led will flash to confirm) To turn this feature On press and hold the # key for 10 seconds. (the green LED will flash 4 times) ARROWHEAD ALARM PRODUCTS Ltd. 1A Emirali Road, Silverdale 0932, Auckland, NZ Ph. 09 414 0085 w w w . aap. co.n z v1.1 Page 1/2 Wiring Color Red Black Green White Blue Brown Yellow Function Power GND D0 D1 LED1 LED2 Buzzer Notes +DC (12-24V DC) Ground Data 0 Data 1 Red LED Light Control Green LED Light Control Buzzer Control WHI TE > L1 GREEN > L0 BLUE > LD1 BROWN > LD2 YELLOW > BUZ RED > 12V BLACK > 0V Up to 50m Terminals on Wiegand-IF2 Function Table sheet Read Card The LED light will be turn into Green, and the buzzer sounds a beep, at the meantime, the reader outputs the Wiegand signal External LED Control When the input voltage for LED is low, the LED will turn into Green or Red External Buzzer When the input voltage for Buzzer is low, the Buzzer will Control sound Wiegand Data This device has locked down software to allow it to com- Output municate with the Wiegand-IF2 Page 2/2 PW WIEGAND-SK4 Proximity Reader Introduction The PW Wiegand-SK4 is a heavy duty wiegand output keypad, with proximity reader, compatible with 125KHz EM format card. The keypad is fully potted, and can function at extreme temperatures (-40 ~60), which allows it is capable to be mounted either indoor or outdoor. Specifications Operation Voltage Standby Current Frequency Card Type Read Range Output Format Operating Temperature Operating Humidity Color Index of Protection Dimension(H x W x T) 12~24V DC 50mA 125KHz EM card Up to 2.8 inches (7cm) AAP Custom 40-bit -40~60 10% to 95% RH Silver IP66 134 x 54 x 23mm Special Backlight Feature The PW Wiegand-SK4 device has the ability to automatically turn off its backlight after 20 seconds if no keys are pressed. To turn this feature Off press and hold the # key for 10 seconds. (the green led will flash to confirm) To turn this feature On press and hold the # key for 10 seconds. (the green LED will flash 4 times) ARROWHEAD ALARM PRODUCTS Ltd. 344b Rosedale Rd, Albany, Auckland. Ph. 09 414 0085 Fax. 09 414 0088 www.aap.co.nz v1.0 Page 1/2 Wiring Color Red Black Green White Blue Brown Yellow Function Power GND D0 D1 LED1 LED2 Buzzer Notes +DC (12-24V DC) Ground Data 0 Data 1 Red LED Light Control Green LED Light Control Buzzer Control WHI TE > L1 GREEN > L0 BLUE > LD1 BROWN > LD2 YELLOW > BUZ RED > 12V BLACK > 0V Up to 50m Terminals on Wiegand-IF2 Function Table sheet Read Card The LED light will be turn into Green, and the buzzer sounds a beep, at the meantime, the reader outputs the Wiegand signal External LED Control When the input voltage for LED is low, the LED will turn into Green or Red External Buzzer When the input voltage for Buzzer is low, the Buzzer will Control sound Wiegand Data This device has locked down software to allow it to com- Output municate with the Wiegand-IF2 Page 2/2