User Guide for IPGARD models including: SA-UHN-1S-P, Secure KVM Isolator, SA-UHN-1S-P Secure KVM Isolator, KVM Isolator, Isolator

Quick Start Guide

SA-UHN-1S-P | IPGARD

SA-UHN-1S-P - SmartAVI


File Info : application/pdf, 2 Pages, 266.29KB

PDF preview unavailable. Download the PDF instead.

SA-UHN-1S-P-QSG
TECHNICAL SPECIFICATIONS

VIDEO

Format

HDMI

Host Interface

(1) HDMI 19-pin F

User Console Interface

(1) HDMI 19-pin F

Max Resolution

3840 x 2160 @ 60Hz

DDC

5 volts p-p (TTL)

Input Equalization Automatic

Input Cable Length Up to 20 ft.

Output Cable Length Up to 20 ft.

USB

Signal Type

USB 1.1 and 1.0 Keyboard and Mouse only. USB 2.0 for CAC connection.

USB Type B Inputs (1) Keyboard-Mouse; (1) CAC

User Console Output Interface

(2) USB Type-A for keyboard and mouse connection only. (1) USB Type-A for CAC connection.

AUDIO

Input

(1) Connector Stereo 3.5mm Female

Output

(1) Connector Stereo 3.5mm Female

POWER

Power Requirements

12V DC, 3A power adapter with center-pin positive polarity

ENVIRONMENT

Operating Temp

32° to 104° F (0° to 40° C)

Storage Temp

-4° to 140° F (-20° to 60° C)

Humidity

0-80% RH, non-condensing

CERTIFICATIONS

Common Criteria Validated To Security Accreditation NIAP, Protection Profile PSS
Ver. 4.0

OTHER

Emulation

USB 1.1 and USB 2.0 Compatible

Control

Front Panel Buttons

WHAT'S IN THE BOX

PART NO. QTY DESCRIPTION

SA-UHN-1S-P

1

1-port, Secure HDMI KVM Isolator

PS12VDC3A

1

12VDC, 3A power adapter with center-pin positive polarity.

1 Quick Start Guide

NOTICE
The information contained in this document is subject to change without notice. iPGARD makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for particular purpose. iPGARD will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material. No part of this document may be photocopied, reproduced, or translated into another language without prior written consent from iPGARD, Inc.
20180122
DESIGNED AND MADE IN THE USA
Toll Free: (888) 994-7427
Phone: (702) 990-0523 Fax: (702) 441-5590
3291 N. Jones Blvd., Las Vegas, NV 89108
iPGARD.COM

SA-UHN-1S-P
Secure KVM Isolator

CONSOLE

K/M

CAC

AUDIO

HDMI OUT

Advanced 1-Port Secure Single-Head HDMI KVM Isolator
Quick Start Guide
A full Manual can be downloaded from www.ipgard.com/documentation/

EDID LEARN
The KVM is designed to learn a connected monitor's EDID upon power up. In the event of connecting a new monitor to the KVM, a power recycle is required.
The KVM will indicate the unit's EDID learn process is active by flashing the front panel's LED. The LED will flash green for approximately 10 seconds upon beginning the EDID learn. Once the LED stop flashing, the power will cycle and the EDID learn will be complete.
A monitor must be connected to the video output port located in the console space at the back of the KVM during the EDID learn process.
If the read EDID from the connected monitor is identical to the current stored EDID in the KVM then the EDID learn function will be skipped.

HARDWARE INSTALLATION
1. Ensure that power is turned off or disconnected from the unit and the computer. 2. Use a HDMI cable to connect the HDMI output port from the computer to the corresponding
HDMI IN port of the unit. 3. Use a USB cable (Type-A to Type-B) to connect a USB port on the computer to the respective
USB ports of the unit. 4. Optionally, for CAC models, connect a CAC (Common Access Card, Smart Card Reader) to the
CAC port in the user console interface. 5. Optionally, connect a stereo audio cable (3.5 mm to 3.5 mm) to connect the audio output of
the computer(s) to the audio in ports of the unit. 6. Connect a monitor to the HDMI OUT console port of the unit using a HDMI cable. 7. Connect a USB keyboard and mouse in the two USB console ports. 8. Optionally, connect stereo speakers to the audio out port of the unit 9. Finally, power on the KVM by connecting a 12VDC power supply to the power connector, and
then turn on the computer.
Note: You can connect 1 computer to the 1 port KVM.

K/M CONSOLE
AUDIO
SA-UHCANC -1S-P

HDMI OUT

A full Manual can be downloaded from www.ipgard.com/documentation/
DESIGNED AND MADE IN THE USA

SA-UHN-1S-P

HDMI IN AUDIO OUT HDMI OUT

USB IN USB OUT AUDIO IN

CAC IN CAC OUT

A full Manual can be downloaded from
www.ipgard.com/documentation/



References

Adobe PDF Library 15.0 Adobe InDesign 15.0 (Windows)