MONKEY LOOP ML-DT1

Specifications

• Input Impedance: 500 kohm
• Output Impedance: 150 ohm
• Recommended Load Impedance: 10 kohm
• Equival Input Noise: -90 dBu or less
• Current Draw: 5.5 mA (DC 9V)
• Dimension: 94mm × 42mm × 48mm
• Weight: 133g
• Accessory: Owner's Manual, Velcro tape 1 pair

Diagram Description

The diagram illustrates the Monkey Loop ML-DT1 guitar effects pedal, detailing its various controls and connection points.

Component Descriptions

AC/DC Adapter Jack

Use only the specified AC adapter and connect it to an AC outlet of the correct voltage.

Level Knob

This knob adjusts the level of the effect sounds.

Tone Knob

This controls the tone. Rotating the knob counterclockwise makes the sound milder, while rotating it clockwise makes the sound sharper.

Input Jack

This jack accepts signals from a guitar or other effect pedals.

Gain Knob

This adjusts the amount of distortion. Rotating it clockwise increases the effect, whereas counterclockwise rotation reduces the effect.

Output Jack

Connect this jack to your amp or to the input of another effect pedal.

Pedal Switch

This switch turns the effect ON/OFF.

Indicator

The indicator shows whether the effect is ON or OFF.