Instruction Manual for MEADE INSTRUMENTS models including: 07368, 07368 Vibration Isolation Pads, Vibration Isolation Pads, Isolation Pads, Pads
Meade Vibration Isolation Pads (Set of 3) # 07368
File Info : application/pdf, 1 Pages, 251.78KB
DocumentDocumentOperating Instructions Meade® #895 Vibration Isolation Pads Introduction Meade #895 Vibration Isolation Pads suppress unwanted vibrations that can sometimes plague a telescope-tripod assembly, such as ground-based vibrations or accidental contact by an observer. The pads can reduce vibrations lasting as long as seven or eight seconds down to less than one second. The Vibration Isolation Pads work effectively on any type of stable surface, such as concrete, soil, grass, and so forth. Parts List Three (3) Vibration Isolation Pads are included. Place tripod leg in center of pad To Use the Vibration Isolation Pads 1. Place one vibration pad near a leg of your tripod. 2. Lift the tripod leg a few inches and move the pad under the leg. 3. Adjust the pad so the tripod leg is positioned over the center of the pad. Then lower the leg. 4. Repeat the above procedure for the other two legs. Note: Do not attempt to lift the entire tripod and place the tripod on all three pads at once. Position the pads one at a time. Fig. 1: Top view of Vibration Pad. If you have a question concerning use of the Meade #895 Vibration Isolation Pads call the Meade Instruments Customer Service Department. MEADE CONSUMER SOLUTIONS Please contact us at customerservice@meade.com Customer Support Call Center +1 (800) 626-3233 (U.S.A. Only). Our representatives are available to handle your calls regarding any Meade product 8:00am to 3:00pm Pacific Standard Time, Monday through Friday, excluding holidays. Meade Instruments 89 Hangar Way Watsonville, CA 95076 Fig. 2: Place tripod leg into the center of the pad. MEADE LIMITED WARRANTY The Meade Instruments Statement of Limited Warranty is published at: www.meade.com/supports/warranty/ A printed copy of the Meade Statement of Limited Warranty will be made available by Meade upon written request. See below for Meade contact information. Warranty Claim Meade Instruments 89 Hangar Way Watsonville, CA 95076 +1 (800) 626-3233 customerservice@meade.com SUBJECT: Warranty Claim © 2023 Meade Instruments reserves the right to change product specifications or to discontinue product without notice. 14-0270-00 Rev 3