SmartDevil E07 True Wireless Bluetooth Earbuds
Instruction Manual
Product Information
Brand: SmartDevil
Model: E07
Document Version: V2
Date: 2023.07.04
Manufacturer: Shenzhen SmartDevil Digital Technology Co., Ltd.
Website: www.smartdevil.com
Packing List
The package includes:
- E07 True Wireless Bluetooth Earbuds
- Charging Case
- Earbuds Tips
- Manual
- Lanyard
- Type-C Charging Cable
Visual Description: The packing list shows an image of the charging case, two earbuds, different sizes of ear tips, a lanyard, a manual booklet, and a Type-C charging cable.
Product Introduction
Earbud Components:
- 1. Touch Control Area
- 2. Microphone
- 3. Earbuds Tip
Charging Case Components:
- 4. Charging Contacts
- 5. L/R Logo
- 6. Sound Output
- 1. Type-C Charging Port
- 2. Lanyard Hole
Visual Description: Diagrams illustrate the individual components of the earbud and the charging case, highlighting key features like the touch control area, microphone, charging contacts, and charging port.
Function Operational Specification
Initial Setup
For first-time use, remove the insulating protective film between the charging case and the earbuds before charging and Bluetooth connection.
Power On
- 1. Open the charging case: The earbuds will automatically turn on when taken out.
- 2. Manual Power On: If earbuds are off, long press the unilateral touch area of the earbud for 5 seconds.
Power Off
The earbuds automatically turn off when placed back into the charging case.
Bluetooth Pairing
- Open the charging case. The earbuds will automatically enter pairing mode when taken out.
- On your phone, activate Bluetooth settings and select "SmartDevil E07" from the list.
- If no device is connected for over 5 minutes, or the connection is invalid, pairing will fail, and the earbuds will automatically shut down.
Automatic Reconnection: After successful pairing, the earbuds save the device's Bluetooth information. To reconnect, simply open the charging case and take out the earbuds; they will automatically connect to the last paired device. Both left and right earbuds can be used independently.
Game Mode
Activate or deactivate game mode by clicking either earbud 4 or 5 times. The earbuds will return to normal mode after being placed back in the charging case.
Clear Paired Information
To clear paired information, simultaneously long-press the left and right earbuds for 8 seconds. A voice prompt will confirm, and the earbuds will enter pairing mode in approximately 3 seconds.
Connection Exception and Handling
- Effective Range: Bluetooth effective distance is 10 meters. If you go beyond this range, the earbuds will disconnect. They will automatically reconnect within 5 minutes of re-entering the effective range. Otherwise, they will shut down. To reconnect manually, follow the "Bluetooth Pairing" steps.
- Troubleshooting Connection Issues: If the earbud device cannot be searched or the connection times out:
- Check if the insulating protective film has been removed from the charging case and earbuds.
- Confirm the earbud is powered on and in pairing mode.
- If connection still fails, long-press the left and right earbuds for 8 seconds to clear paired information, then re-enter pairing mode to connect.
Touch Control Functions
Music Mode
- Play/Pause: Double-tap Right Earbud
- Next Track: Triple-tap Right Earbud
- Previous Track: Triple-tap Left Earbud
Call Mode
- Answer/End Call: Double-tap Left/Right Earbud
- Reject Incoming Call: Long Press Left/Right Earbud for 3 seconds
Voice Activation
- Siri or other voice assistants: Double-tap Left Earbud
Game Mode
- Activate/Deactivate: Tap 4/5 times on Left/Right Earbud
Reset
- Reset all settings: Long press Left and Right Earbuds simultaneously for 8 seconds
Electric Quantity Instructions
- Earbud Power Display: The remaining power is usually displayed in the mobile phone's status bar after connecting the earbuds via Bluetooth.
- Earbud Low Battery Reminder: When earbud battery is below 10%, a warning will sound every 5 minutes until power off. Place earbuds in the charging case to charge.
- Charging Case Power Display:
- Below 25% battery: The green light on the charging case flashes and turns off after 4 seconds. Charge the case immediately.
- 25%-100% battery: The green light on the charging case stays on for 4 seconds. The case can charge the earbuds 1-2 times.
Charging Instructions
Earbuds Charging
Place the earbuds in the charging case. The white light on the earbuds will flash for 10 seconds while they are charging.
Charging Case Charging
It is recommended to use a standard 5V/1A adapter and the included Type-C charging cable. The white light on the case flashes while charging. When the battery reaches 100%, the white light will remain steady.
Charging Case Indicator Status
- Low Battery: Green light flashes and turns off after 4 seconds (below 25%).
- Charging: White light flashes.
- Fully Charged: White light is steady on.
Basic Parameter
Parameter | Specification |
---|---|
Device Name | SmartDevil E07 |
Sound Unit | 6mm, compounded PU film |
Frequency Range | 20Hz-20KHz |
Microphone Sensitivity | -38±1dB |
Audio Decoding | AAC/SBC |
Bluetooth Version | 5.3 |
Bluetooth Distance | 10m |
Battery Type | Lithium-ion Battery |
Battery Capacity | 400mAh (Earbuds), 320mAh (Charging Case) |
Battery Life | 7H (Earbuds, 30% volume), 19H (Charging Case) |
Charging Time | 0.5H (Earbuds), 1.5H (Charging Case) |
Charging Input | DC 5V/1A |
Charging Port | Type-C |
Note: Specifications are derived from SmartDevil Lab tests conducted at 25°C using the standard SmartDevil charger. Actual performance may vary based on usage environments and chargers.
Attentions
- Keep out of reach of children to prevent choking hazards from small parts.
- This product is not a toy. Children under 3 years old should not use it. Children aged 3 and above should use it under adult supervision.
- For safety, do not use while driving or riding. Comply with traffic regulations.
- Avoid prolonged use at high volumes to prevent hearing damage. Discontinue use and seek medical attention if ear discomfort or tinnitus occurs.
- The charging case is not waterproof. Do not immerse the product in water. Avoid exposure to splashing liquid, rain, or dampness.
- In dry conditions, static electricity may cause a tingling sensation. This is normal and not equipment damage.
Battery Safety Warning
- Operate the product within a temperature range of 0°C to 40°C to prevent malfunction.
- Do not expose the product to high temperatures, direct sunlight, heat sources, or fire.
- Do not attempt to disassemble, replace, or modify the battery yourself. This can cause fire or product damage.
- Avoid impact, dropping, crushing, or placing the product in fire, as this may cause explosion or other hazards. If the product swells, discontinue use.
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC ID: 2BBOM-E07
Contact Information
Manufacturer: Shenzhen SmartDevil Digital Technology Co., Ltd.
Address: Floor 4-6, Building C, No.10, East District, Shangxue Science and Technology Park, Bantian Street, Longgang District, Shenzhen.
Phone Number: +86 0755-83746007
Website: www.smartdevil.com
Visual Description: A QR code is present, linking to the SmartDevil official website.