Sungrow SH15-25T Series Inverters
The Sungrow SH15-25T series represents a new generation of 3-phase solar inverters designed for efficiency and flexibility. These inverters offer a spacious connection panel, eliminating the need to open the unit for access. Key features include:
- Maximum Flexibility: Equipped with 3 MPPT (Maximum Power Point Tracking) configurations (2/2/1) and high input current capabilities (up to 32A/16A per string).
- Powerful Backup: Capable of supporting full house loads during outages, with backup power up to 43kVA.
- Wide Voltage Range: Operates efficiently across a broad voltage spectrum from 150V to 950V.
- High DC/AC Ratio: Achieves up to 200% DC/AC ratio, maximizing energy harvest.
- High PV Input Current: Supports 16A per string and 20A short circuit current per string for robust performance.
- Maximum Safety: Features AFCI 2.0 and DC Type II/AC Type II surge protection.
- PID Protection: Includes PID zero protection to prevent potential-induced degradation in solar arrays.
- Unbalanced AC Output: Manages phase-by-phase self-consumption and feed-in limitation, with a maximum unbalance of 16A or 1/3 of nominal power.
Sungrow SBH100-400 Series Battery Systems
The Sungrow SBH100-400 series offers advanced energy storage solutions, providing modularity and ease of use. These systems are built with safety and performance in mind:
- Modular System: Scalable from 10kWh to 40kWh, configurable with 2 to 8 modules (5kWh per module).
- Plug and Play: Designed for simple installation with no external cables required between modules.
- LFP Chemistry: Utilizes Lithium Iron Phosphate (LFP) battery chemistry, recognized for its safety and longevity in energy storage applications.
- Integrated Breaker: Features an integrated breaker for safe electrical isolation.
- Optimized for Backup: Offers high maximum charge/discharge current capabilities of 50A.
- Y Connector Compatibility: Supports parallel connection of up to two battery towers, enabling storage capacities of up to 80kWh.
Installation Note
For the Y connector installation of SHT SBH systems, it is important to only connect battery towers of the same size. Female and male connectors are included for the setup.
