BLAVOR PN-W35 10000mAh Magnetic Wireless Power Bank

Introduction

Thank you for choosing BLAVOR's product. This manual provides detailed information and instructions for use to ensure a better user experience. Please read carefully before using this product.

1. Product Details

• Ring Buckle
• iWatch Charging Area
• USB-C Output Cable
• Wireless Charging Area
• Lightning Output Cable
• Velvet
• USB-C Input/Output Port
• Wireless Charging Indicator
• Lightning Input Port
• Power Button
• Battery Indicator

2. Product Parameters

3. Product Features

• Exclusive design, fashionable and beautiful.
• Original A-class polymer battery provides safety and stability.
• Wireless output, compatible with all Qi-enabled mobile phones.
• Uses the original magnetic module, compatible with all models of Apple Watch.
• Strong magnetic portable design, perfectly absorbs mobile phones (iPhone 12 series and later) and is not easy to drop.
• Built-in two cables for charging at any time, compatible with various digital products.
• Ring buckle bracket design, suitable for various application scenarios.

4. Package Includes

• 1 * Magnetic Wireless Power Bank
• 1 * USB-C Charging Cable
• 1 * Ring Buckle
• 1 * User Manual

5. Instructions

5.1 Turn on/off

Press the power button to turn on the power bank. The LED battery indicator lights up. If no charging device is connected, the power bank will automatically shut down after 30 seconds.

5.2 Charging the power bank

Plug the USB-C cable or the Lightning cable into the power bank and the other end into the charger's port. The LED battery indicator will flash while charging and stay on when fully charged.

5.3 Charge your devices

• Cable charging: Plug into your device, then press the power button to turn on the power bank. The LED battery indicator lights up.
• Wireless charging: Attach your phone to the wireless charging area of the power bank, then press the power button to charge your phone. The magnetic function is only compatible with iPhone 12 series and later.

5.4 Watch wireless charging

Press the power button; the indicator light turns on. Place the watch in the wireless charging area, and the watch will be absorbed and charged automatically.

6. Product Maintenance

To ensure maximum efficiency, please note the following:

• Keep away from wet corrosive substances.
• Do not use chemicals to clean this product.
• When the product is not used for a long time, please charge it every six months.

Tips

• The magnetic wireless charging is not compatible with non-magnetic phone cases.
• Magnetic function is only compatible with iPhone 12 series and later.
• When the power bank is charging or discharging, some heat may be generated due to energy loss during transmission, which is a normal phenomenon.
• When the phone is connected to wireless charging and wired charging simultaneously, the phone will automatically switch to wired charging, and wireless charging will stop.
• It is suggested to plug in the charging cable while using magnetic attraction to perfectly solve problems of overheating and low charging conversion rate.

7. Warning

• This power bank is suitable for DC 5V/3A charging devices. Using a device beyond this specification may cause damage.
• Do not disassemble or modify the power bank.
• Keep away from fire and keep dry to prevent failures.
• Do not use the power bank at high temperatures (above 45°C).
• Connect a device that conforms to the output specifications of this product.
• If you notice any bulging, swelling, leakage, or other abnormalities, stop using the power bank immediately.

8. Warranty & After-Sales Service

• Every BLAVOR product comes with a 12-month warranty and lifetime technical support.
• For any issues with products or services, please contact BLAVOR customer service at Support@blavor.com. Responses are typically provided within 24 hours on business days.

Please contact our after-sales service department at Support@blavor.com.