Zebra Technologies | Visible. Connected. Optimized. | Zebra
Installation Guide for ZEBRA models including: ET4X, ET4X Expansion Back, Expansion Back, Back
Zebra ET4X Rugged Tablet - 8" WXGA - Octa-core Dual-core (2 Core) 2.20 GHz Hexa-core (6 Core) 1.80 GHz) - 4 GB RAM - 64 GB Storage - TAA Compliant
File Info : application/pdf, 2 Pages, 707.91KB
DocumentDocumentET4X Expansion Back Installation Guide Installation 1 CAUTION: Power off the ET4X before installing or removing Expansion Back. 2 CAUTION: Do not use any tool for battery cover removal. Puncturing the battery or seal may cause a hazardous condition and a potential risk of injury. Remove battery cover and store in safe place. MN-004506-01EN -- May 10, 2022 Zebra Technologies | 3 Overlook Point | Lincolnshire, IL 60069 USA zebra.com ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. © 2022 Zebra Technologies Corp. and/or its affiliates. All rights reserved. 3 Insert the tabbed end of the expansion back into the battery well. Ensure that the tabs on the expansion back are aligned with the slots in the battery well. 4 3 5 Using a T5 Torx screwdriver, secure expansion back to device using four M2 screws. Torque to 0.43N-m. Screws (4) 4 Rotate the expansion back down into the battery well.