User Guide for BAUHN models including: APB27GMC-0725-MP 65W GaN Mini Charging Station, APB27GMC-0725-MP, 65W GaN Mini Charging Station, GaN Mini Charging Station, Mini Charging Station, Charging Station, Station
Search Results for “ ” – Bauhn
Product Overview. Have you got everything? User Guide. Model: APB27GMC-0725-MP. 65W GaN Mini Charging Station. Operation.
20 ore fa — Product Overview. Have you got everything? User Guide. Model: APB27GMC-0725-MP. 65W GaN Mini Charging Station. Operation.
User Guide Model: APB27GMC-0725-MP 65W GaN Mini Charging Station Have you got everything? A A E F B C D A. 1 x 65W GaN Mini Charger B. 1 x Power Cable C. 1 x USB-C Cable D. 1 x Micro USB Cable E. 1 x User Guide F. 1 x Warranty Certificate A. Power Input B. LED Indicator C. USB-A1/C1 Output D. USB-A2/C2 Output Product Overview A B C D Operation Connect to power source Plug in the supplied power cable into a power source and make sure the power source is switched on and working. The LED indicator will light up and the charger will enter standby mode. Charging your devices 1. Charging devices using the USB-A1/A2 port Plug one end of your USB-A cable into the USB-A1/A2 port, and the other end into your mobile device. 2. Charging devices using the USB-C1/C2 port Plug one end of your USB-C cable into the USB-C1/C2 port, and the other end into your mobile device. Note: PD (Power Delivery) is supported via the correct USB-C cables and devices. If you want to charge your devices to exceed 60W (20V3A), recommend using USB-C cable with E-Marker (not included). Power Input 1 1 2 2 The charging station won't turn on No output from the USB ports Charging speed is slow Troubleshooting · Make sure that the AC power cord is securely plugged into the wall outlet. Check the wall outlet is turned on and the indicator of the charging station is lit. · Check that the USB cable is connected securely to the USB port and/or try a different USB port. · Use another USB cable. · The USB-A1/C1 and USB-A2/C2 are using separate power path, and they are sharing the total output 65W Max. · When charging one device, please insert the USB cable to one of the USB ports. · When charging two devices, please insert the USB cables to the separate power path. · When charging three or more devices, or insert cables to both USB-A1 and USB-C1 (or USB-A2 to only 5V3A. and USB-C2)the output of that power path will decrease Input 100-240V~50/60Hz Max 2A Output USB-C1 / C2 Output: 5V3A,9V3A,12V3A,15V3A,20V3.25A (65W Max) USB-A1 / A2 Output: 5V3A,9V2A,10V2.25A,12V1.5A (22.5W Max) USB-C1 + A1 Output: 5V3A USB-C2 + A2 Output: 5V3A (Total USB output 65W Max if more than 1 output use) Dimensions Weight 90 x 90 x 22mm 135g Give us a call What? You mean this User Guide didn't have ALL the answers? Speak to us! We'd love to help you get up and running as quickly as possible. Call our After Sales Support on 1300 002 534 Operating hours: Monday-Friday, 8:30am-6pm; Saturday, 9am-6pm AEST General Safety Warnings For the safety of yourself and others, follow all instructions and take notice of all the warnings. When adhered to, these safety precautions can reduce the risk of fire, electric shock and injury. This product complies with Australian Safety standard AS/NZS 62368.1 to ensure the safety of the product. The RCM is a visible indication of a product's compliance with all applicable ACMA regulatory arrangements, including all technical and record-keeping requirements. This symbol indicates double insulated class II equipment. Does not require an earth connection. This symbol indicates for indoor use only. IMPORTANT · Damage: If the product is damaged, contact the After Sales Support line for advice. · Repair: If the product requires repair, contact the After Sales Support line; never disassemble or modify the product or attempt to service it yourself. · The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction by a person responsible for their safety. · Young children should be supervised to ensure they do not play with the product. Close supervision is always necessary when any appliance is used by or near children. · The product is designed for indoor use in dry places only. · Before using the product, make sure to place it away from: heat sources, radiators or other products that produce heat; areas with high temperatures, high humidity or direct sunlight; excess dirt and dust; open windows and any place where water may get to the unit. · Do not immerse the product in water or other liquid, or expose the electrical connections to water or other liquid. · Unpack the product and keep the original packaging carton and materials in a safe place. It will help prevent any damage if the product needs to be transported in the future, and you can use it to store the product when it is not in use. · The product should always be repacked in its original packaging whenever transporting to prevent any possible damage. · When not in use: Disconnect from the power source and store in a cool, dry and well ventilated location out of direct sunlight, and not subject to humidity. · Warning: The socket outlet should be located near the equipment and should be easily accessible. Responsible disposal of the product At the end of its working life, do not throw this product out with your household rubbish. An environmentally friendly method of disposal will ensure that valuable raw materials can be recycled. Contact your local authority for your nearest recycling centre. Electrical and electronic items contain materials and substances which, if handled or disposed of incorrectly, could potentially be hazardous to the environment and human health. Responsible disposal of the packaging The packaging of the product has been selected from environmentally friendly materials and can usually be recycled. Please ensure these are disposed of correctly. Plastic wrapping can be a suffocation hazard for babies and young children, please ensure all packaging materials are out of reach and are safely disposed of. Please ensure they are offered for recycling rather than throwing these materials away. Cleaning the product Only use a soft, dry cloth for cleaning the product; do not use a damp cloth. Never clean with industrial strength polish, wax, benzene, paint thinner, air freshener, lubricant, detergent or other chemicals. Wipe off any moisture, dirt or dust on the power sockets and plug pins with a clean, dry cloth. GENERAL SAFETY WARNINGSAdobe PDF library 17.00 Adobe Illustrator(R) 24.0