Manuals+

iTOMA CKS708 User Manual

It's my pleasure to help you!

Model: CKS708

Visit our website at www.itoma.com

Warning

[Warning: High Voltage] The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated 'dangerous voltage' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

[Caution] RISK OF ELECTRIC SHOCK DO NOT OPEN. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

[Important Safety Information] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT SAFETY INSTRUCTIONS

  1. Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.
  2. Do not block any ventilation openings.
  3. Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus (including audio amplifiers) that produce heat.
  4. If the provided AC mains adapter does not fit your outlet or is damaged, seek the advice of a qualified electrician before using a replacement mains adapter.
  5. Protect the power cord from being walked on, knotted, snagged or pinched.
  6. Only use attachments / accessories specified by the manufacturer.
  7. Unplug this apparatus during lightning storms or when unused for long periods of time.
  8. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.
  9. Do not use the apparatus or its AC mains adapter in environments where there is a risk of water dripping or splashing. Do not place objects filled with liquids, such as vases or drinks, near the apparatus or AC mains adapter.
  10. The AC mains adapter should remain readily accessible so that AC power can be disconnected in an emergency. The AC mains adapter must be removed completely from the AC power outlet to disconnect the power supply.
  11. The lithium battery must not be exposed to excessive heat (such as sunshine) and must be correctly installed. Refer to the Changing the Lithium Battery section for more information.

Preparation for Use

Unpacking and Set Up

Protect Your Furniture

This model is equipped with non-skid rubber feet to prevent the product from moving when you operate the controls. These 'feet' are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However, certain types of oil-based furniture polishes, wood preservatives, and cleaning sprays may cause the rubber "feet" to soften and leave marks on the furniture. To avoid the risk of such damage to your furniture, we recommend either a piece of cloth or self-adhesive felt pads attached to the underside of the alarm clock radio.

Power Source

The alarm clock radio uses an AC power adapter of a kind that depends on where the alarm clock radio is purchased. The AC power adapter for North America is rated 120V at 60Hz and within Europe or Australia is rated 220-240V at 50Hz. Using an incorrect AC power adapter is not covered by your warranty because it may damage the alarm clock radio. A lithium battery is used to maintain the time and alarm settings when the alarm clock radio loses AC mains power. To maximize the life of the lithium battery and to keep the radio and alarm functions active, you must ensure the AC power adapter remains connected and that the AC mains outlet is never turned off. Ideally, you should use an un-switched mains outlet.

IMPORTANT NOTES

Location of Controls and Indicators

FRONT PANEL

TOP PANEL

BACK PANEL

5 in 1 Control Description

The central control knob and surrounding buttons offer multiple functions:

When using Bluetooth connection:

While listening to the radio:

Setting the Time Zone

If the displayed HOUR is different from your current time, you can quickly manually adjust the HOUR.

Procedure:

  1. Press and hold the "TIME ZONE" button; the HOUR digits will blink.
  2. Press [Up Arrow] or [Down Arrow] button to adjust the hour.

Note: Time Zone and Clock Setting can only be adjusted in Standby mode, where the function of Radio and Bluetooth are disabled (Indicators of "MHz" and "BT" are OFF).

Setting the Date / Time Manually

(Turn the clock to Standby mode before setting the time)

To check the current date and time, short press "TIME SET" repeatedly to see the time, month, day, and year.

Procedure:

  1. Press and hold the “TIME SET” button; the HOUR and MINUTE digits will blink. Press [Left Arrow] or [Right Arrow] button to adjust the minute. Press [Up Arrow] or [Down Arrow] button to adjust the hour.
  2. Press "TIME SET" button again; the “MONTH" and "DATE" digits will blink. Press [Left Arrow] or [Right Arrow] button to adjust the date. Press [Up Arrow] or [Down Arrow] button to adjust the month.
  3. Press "TIME SET" button again; the "YEAR" digits will blink. Press [Up Arrow] or [Down Arrow] button to adjust the year.
  4. Press "TIME SET" button again; "24H" or "12H" blinks on the display (24H means 24-hour clock, 12H means 12-hour clock). Press [Up Arrow] or [Down Arrow] button to adjust the time format.
  5. Press "TIME SET" button again or wait for 40 seconds to return to the clock display.

Daylight Saving Time Setting

This clock was preset with Auto DST (Daylight Saving Time) for different countries.

Procedure:

Note: When your local DST starts, the indicator "DST" will appear on the display until the DST ends.

Setting the Alarm

Turn the clock to STANDBY mode before setting the alarm.

Your clock radio has two separate alarms (Alarm 1 and Alarm 2) that can be set and used independently. Please ensure that you have set the wakeup time(s) and the day(s) of the week needed for the alarms correctly.

Alarm Ringtones:

Setting Alarms for the Day(s) of the Week:

Setting the Wakeup Alarms (Example for Alarm 1):

  1. Press "AL1" repeatedly to select your alarm ringtone:
    • When [Buzzer] ? is on the display, Alarm 1 (Wake to Buzzer) is turned on.
    • When [Radio] ? is on the display, Alarm 1 (Wake to Radio) is turned on.
    • If both [Buzzer] and [Radio] indicators disappear, Alarm 1 is completely turned off.
  2. After selecting your desired alarm ringtone, press and hold the "AL1" button for 3 seconds; the HOUR and MINUTE digits will blink.
  3. Press [Left Arrow] or [Right Arrow] to adjust the minute. Press [Up Arrow] or [Down Arrow] to adjust the hour.
  4. Press "AL1" again; the "CURRENT VOLUME LEVEL" digits will blink. The volume levels range from 1 to 15, with level 15 being the loudest.
  5. Press [Down Arrow] or [Up Arrow] to adjust to your desired alarm volume level.
  6. Press "AL1" again; the "DAY(S) OF THE WEEK" texts (MON to SUN) will blink.
  7. Press [Down Arrow] or [Up Arrow] to select the alarm day mode (You can set the alarm days in the following 4 options:
    • Option 1: Everyday Monday to Sunday
    • Option 2: Weekdays Monday to Friday
    • Option 3: Weekends Saturday and Sunday
    • Option 4: Single Day Monday/Tuesday/Wednesday/Thursday/Friday/Saturday/Sunday
  8. Press "AL1" button or wait for 40 seconds to exit the alarm setting. After you have set the alarm, the alarm indicator (? or ?) will appear on the display.
  9. If you need to turn off AL1 completely, please press "AL1" or "STANDBY" button.
  10. To set the Alarm 2, repeat the above steps 1 to 9.

Note 1: If no operation is performed while the alarm is sounding, the alarm will stop after 60 minutes.

Note 2: The last radio station you listened to will play when you choose "Wake to radio" for your alarm ringtone.

Snooze / Repeat

When the alarm goes off, press the "SNOOZE/▼/►||/STO." button to doze for another 9 minutes. You can repeatedly press this button for more dozings during the 60-minute cycle.

Press "AL1" or "AL2" button to stop the alarm from sounding.

To deactivate the alarm completely, keep pressing "AL1" or "AL2" button until the alarm indicator disappears on the display.

Playing the FM Radio

Press the "STANDBY" button to turn on the clock radio and press the "MODE" button to switch to the radio mode. The frequency of "MHz" will appear on the display. For better reception, fully extend and adjust the position of the antenna.

Radio Operation:

A: Adjust the "MHz"

In the radio mode, when the "MHz" digits appear on the display, press [Left Arrow] or [Right Arrow] button to adjust the MHz frequency.

B: Auto-search/scan FM stations

Press [Left Arrow] or [Right Arrow] button for 2 seconds and release. The search/scan will stop at the next available lower or higher station.

C: Store radio station presets (max. up to 20 stations)

  1. Press and hold the [Down Arrow] button to store station presets.
  2. In the radio mode, press [Left Arrow] or [Right Arrow] button to search your desired station.
  3. Press and hold the [Down Arrow] button until the Program Number (from P01 to P20) appears on the display.
  4. Press [Left Arrow] or [Right Arrow] button to change to the Program Number you desired, press the [Down Arrow] button again and your specific station will be stored under the selected Program Number.

D: Recall preset radio stations

  1. When the radio mode is on, short press the [Memory/Recall] button and the Program Number (from P01 to P20) will appear on the display.
  2. Press [Left Arrow] or [Right Arrow] button to select your stored Program Number and listen to your preset station.

Note: Keep the clock radio away from other electronic devices to avoid radio interference. For better reception, fully extend and adjust the position of the FM antenna wire.

Using the Sleep Timer

You can fall asleep to the radio using the sleep timer, which is set up in 10-minute increments (The sleep timer duration ranges from 10 minutes to 90 minutes). After reaching the desired duration, the radio will turn off automatically.

Procedure:

  1. Press "STANDBY" to turn on the clock radio.
  2. Press "SLEEP"; the "10" digits will appear on the display, indicating the sleep timer has been set for 10 minutes.
  3. To change the sleep timer duration, keep pressing the "SLEEP" button until your desired duration appears.
  4. To deactivate the sleep timer, keep pressing "SLEEP" until "OFF" appears on the display, or press "STANDBY" to turn off the sleep timer directly.

Note: When setting the Sleep Timer, the indicator "SLP" flashes and it appears on the screen until the sleeping time ends.

Dimmer Control

To adjust the display brightness, keep pressing the "DIMMER" button until your desired brightness level appears. Brightness is available in 4 levels and can be adjusted even when the radio or Bluetooth connection is in use.

Press the "DIMMER" button to adjust the brightness level as follows:

2-Level LED Decor

Press the "LED" button to turn the ice blue light on (high/low) or off if needed.

Bluetooth Connection

  1. Press the "STANDBY" button to turn on the clock radio.
  2. Press the "MODE" button to switch to Bluetooth (BT) connection.
  3. When the "BT" indicator ? blinks, the clock is searching for Bluetooth connection. Please turn on the Bluetooth of your external audio device and look for CKS708 for connecting. Once connected, the "BT" indicator stops blinking. Then you can play music from your external audio device through the clock speaker.
  4. You can control the music playing either on your external audio device or by pressing the [Play/Pause] button (||) on your clock to play or pause music.
  5. Press [Left Arrow] or [Right Arrow] button to play music forwards.
  6. Circulate the 5-in-1 rotating knob to change the volume.

USB for Charging

Output 5V up to 1A for charging mobile phone or portable digital audio player.

Note: Charging current drawn from the unit may vary due to different USB charging cable conditions or battery charging characteristics.

Earphone Jack

  1. Press the "STANDBY" button to turn the unit On.
  2. Press the "MODE" button to select and listen to your desired audio source (Bluetooth or Radio).
  3. Adjust the output volume by turning the Shuttle Wheel (rotating knob) in clockwise or counterclockwise direction.
  4. Connect your headphone plug into the 3.5mm earphone jack ? to enjoy streaming stereo through your headphone.

Note: If an alarm is set and your headphone is still connected to the unit, the Wake to Radio/Buzzer alarm will not go off on the speaker but only on your headphone.

CAUTION: Prolonged use of headphone at high volume may cause irreparable hearing loss. We strongly advise you to adjust the headphone volume to a reasonable level. The higher the volume for a prolonged time, the higher the risk of damaging your hearing.

Changing the Lithium Battery

The lithium battery needs replacement when the Low BATTERY indicator ? flashes. If you do not replace the battery, then the time and alarm settings will be lost if there is a power interruption.

Use a small cross-point screwdriver to open the battery compartment, then slide out the carrier. Replace the CR2032 battery.

Care and Maintenance

Care of Cabinets

If the cabinet becomes dusty, wipe it with a soft cloth. If the cabinet becomes smudged or dirty, clean it with a soft, slightly dampened cloth. Never allow water or any liquid to get inside the cabinet. Never use any abrasive cleaners or cleaning pads as these will damage the finish of your radio.

Lithium Battery Precautions

The apparatus must not be exposed to dripping or splashing, and objects filled with liquids, such as vases, must not be placed on the apparatus. This marking ♻️ indicates that this product should not be disposed of with other household wastes throughout the country. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle this unit responsibly so as to promote the re-use of material resources. To return your used device, please use return and collection systems or contact the retailer where the product was purchased, as they know how to safely recycle this product.

FCC Warning

FCC PART 15.19 WARNING STATEMENT
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

FCC PART 15.21 WARNING STATEMENT
NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

FCC Part 15.105 Warning Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC's RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Limited Warranty

iTOMA (Hong Kong) Company Limited (iTOMA) warrants to the original consumer of this iTOMA product that it will furnish a replacement for, or, at its sole discretion, repair any part which proves (upon inspection by iTOMA) to be defective under normal use within 1 year of the original purchase date.

This warranty does not apply to cosmetic appearance and consumable items, including, but not limited to, antennas, knobs, cabinets, or cases, and in the case of batteries, for damage caused by leaking batteries. It also does not apply to the product, or to any part thereof, that is damaged through misuse or negligence. Furthermore, this warranty will become invalid if, in the judgment of iTOMA, the product or any part thereof has been installed incorrectly, or has been repaired or altered other than by iTOMA.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusions and limitation may not apply to you.

For Service, Warranty, or Product Information, Please contact iTOMA (Hong Kong) Company Limited, www.itoma.com / contact us by email at info@itoma.com

PLEASE SAVE THIS CARD TOGETHER WITH ORIGINAL DATED PROOF OF PURCHASE FOR YOUR RECORDS AND FOR CUSTOMER SERVICE.

Models: CKS708 Alarm Clock Radio, CKS708, Alarm Clock Radio, Clock Radio, Radio

File Info : application/pdf, 17 Pages, 2.65MB

PDF preview unavailable. Download the PDF instead.

CKS708-EN-IB ?v=1708674902

References

Smallpdf

Related Documents

Preview iTOMA CKS708 Quick Guide: Setting Time and Alarms
Concise instructions for setting the time, date, and alarms on the iTOMA CKS708 clock radio. Includes details on snooze, alarm stop, and daily settings.
Preview iTOMA CKS708 User Manual
User manual for the iTOMA CKS708 alarm clock radio, covering setup, operation, features like FM radio, Bluetooth, sleep timer, dimmer, and LED decor, along with important safety information, FCC warnings, and warranty details.
Preview iTOMA CKS708 User Manual: Alarm Clock Radio with Bluetooth and FM
Comprehensive user manual for the iTOMA CKS708 alarm clock radio, detailing setup, safety instructions, controls, time and alarm settings, FM radio operation, sleep timer, Bluetooth connectivity, USB charging, and maintenance.
Preview iTOMA CKS708 Alarm Clock Radio User Manual - Setup, Features, and Troubleshooting
Get detailed instructions for your iTOMA CKS708 alarm clock radio. Learn how to set alarms, use the FM radio, connect via Bluetooth, adjust dimming, and perform maintenance. Download the complete user manual.
Preview ITOMA CKS3501 User Manual: DAB/FM Radio, Bluetooth Alarm Clock
Comprehensive user manual for the ITOMA CKS3501 alarm clock radio. Learn how to set the time, alarms, use FM/DAB radio, Bluetooth connectivity, sleep timer, and care for your device.
Preview iTOMA Alarm Clock Radio with Bluetooth Speaker User Manual
This document provides important safety instructions and setup guidance for the iTOMA Alarm Clock Radio with Bluetooth Speaker, model CKS708. It covers unpacking, placement, power source information, and essential operating precautions.
Preview ITOMA CKS509 Projection Alarm Clock User Manual - Features and Setup
Comprehensive user manual for the ITOMA CKS509 projection alarm clock, covering setup, features like FM radio, Bluetooth connectivity, USB charging, alarm settings, dimmer control, time projection, and maintenance. Includes safety warnings and warranty information.
Preview iTOMA CKS507 User Manual: Setup, Features, and Operation
Comprehensive user manual for the iTOMA CKS507 clock radio, covering safety instructions, preparation, setting time and alarms, radio functions, Bluetooth connectivity, sleep timer, display dimming, nighttime LED, USB charging, battery replacement, care and maintenance, FCC warnings, and warranty information.