User Manual for I-BOM models including: I-BOM, IBOM, 2A27S-I-BOM, 2A27SIBOM, I-BOM Smart Diaper Sensor, I-BOM, Smart Diaper Sensor
SDsens Co., Ltd. I-BOM 2A27S-I-BOM 2A27SIBOM i bom
File Info : application/pdf, 3 Pages, 104.36KB
DocumentDocumenti-BOM Product Manual 1. Specification Product Name Model Name Power Communication Product size Product weight Operating Storage Smart Diaper Sensor i-BOM (SiB-12) DC 3V (Coin Battery, CR2032), 220mAh BLE 5.0 25mm x 207mm x 8.5mm 13g Temp. : +10 ~ +40, Humidity : under 85%RH Temp. : -10 ~ +60, Humidity : under 90%RH 2. Product contents - Sensor Module : 1ea - Sensor band : 1ea 3. Functions - Urine Alert - Ambient temperature display - Personal care mode : 1~3 babies / Group care mode : 1~6 babies - Defecation diary - Baby character customizing 4. How to use - Install `i-BOM' app to smart phone from google play store. (https://play.google.com/store/apps/details?id=com.soft.ean) - Push the button near the nose of character - Run `i-BOM' app and register the sensor. - Attach the diaper sensor to the diaper [Front side] [Back Side] - When a defecation alarm comes, check the diaper, replace with a new diaper, and then attach the diaper sensor to the new diaper. 5. Certification - FCC ID : 2A27S-I-BOM - KC ID : R-R-s9d-i-BOM 6. FCC Warning Statement - This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment. - This equipment complies with FCC Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. 7. Caution - Do not use the product for any purpose other than its intended purpose. It may cause damage or injury. - Do not disassemble or repair the product arbitrarily. It may cause malfunction or fire. - Do not store the product in a high temperature place or near fire. It may deform the appearance or cause malfunction. - Be careful not to get chemicals on the product. The product may be damaged and there is a risk of transmission to the human body. - Do not allow any conductive material such as metal or liquid to come into contact with the contact point between the module and the band. It may cause product damage. - Be careful of falling, immersion, and impact. The internal components may be damaged. - Be careful not to allow infants or pets to suck or bite the product. - It is recommended to use this device for infants from 0 to 24 months of age, and caution is required for shock and disassembly when used by infants over 24 months of age. - When replacing the band, there is a risk that the separated parts may be swallowed by infants, so be sure to separate the body and the band out of the reach of children. www.i-bom.co.kr