Zebronics Rainbow 100 5.1 Speaker
User Manual
Introduction
Thank you for purchasing Zebronics Speaker. Please read this user manual carefully before Operation & save it for future reference.
Note:
- Avoid the use of this speaker at the high-temperature and high humidity environment.
- Avoid self-disassemble of speaker, or it will result in the failure of warranty.
Features
- Wireless BT/USB/FM/AUX
- LED Display
- 10.16cm Subwoofer
- Remote control
- Volume & Bass adjustment
- RGB Lights
- Stylish design
- Wall mountable
Specifications
| Output power (RMS) | |
| Subwoofer | 30W |
| Satellite | 10W x 5 |
| Total | 80W |
| Driver size | |
| Subwoofer | 10.16cm |
| Satellite | 7.62 cm x 5 |
| Impedance | |
| Subwoofer | 4Ω |
| Satellite | 6Ω |
| Frequency response | 40Hz - 20kHz |
| S/N Ratio | ≥80dB |
| Separation | ≥45dB |
| File format support (USB) | MP3 |
| Line input | 2ch RCA |
| Max. supported memory size (USB) | 32GB |
| FM frequency range | 87.5 MHz-108 MHz |
| BT name | ZEB-RAINBOW 100 |
| BT version | 5.0 |
| Product dimension (W x D x H) | |
| Subwoofer | 150 x 285 x 210 mm |
| Satellite | 100 x 85 x 142 mm |
| Net. weight | |
| Subwoofer | 2.5Kg |
| Satellite | 251g x 5 |
| Total | 3.75Kg |
Control Description
Main Unit
- [USB port]: USB input slot.
- [Prev Track / Channel]: Button to go to the previous track or channel.
- [Play / Pause]: Button to play or pause audio.
- [MODE]: Button to cycle through input modes (BT, USB, FM, AUX).
- [LED Display]: Shows current mode, track info, or status.
- [Next Track / Channel]: Button to go to the next track or channel.
- [Bass Control]: Rotary knob to adjust bass levels.
- [Volume control]: Rotary knob to adjust overall volume.
Remote Control
- [power]: Power ON/OFF button.
- [mute]: Mute/Unmute audio output.
- [0-9]: Numeric buttons for direct track/channel selection (in FM/USB modes).
- [mode]: Button to cycle through input modes.
- [eq]: Selects equalizer presets.
- [repeat]: Toggles repeat playback mode.
- [scan]: Initiates channel scanning (FM mode) or track scanning (USB mode).
- [prev track/channel]: Button to go to the previous track or channel.
- [vol+]: Increases volume.
- [next track/channel]: Button to go to the next track or channel.
- [vol-]: Decreases volume.
- [play/pause]: Button to play or pause audio.
General Instruction
Bluetooth connectivity
Switch the Speaker to BT mode. Scan for nearby BT devices in your mobile. Tap on "ZEB-RAINBOW 100" to connect.
USB mode
Insert the USB pen drive to the speaker. The speaker will detect the USB & audio from it will be played automatically.
FM Radio
Switch the speaker to FM mode. In FM Mode, Short press the Play / Pause key to scan the available FM channels. Once the scanning is done, the speaker will start playing the first scanned channel. The next and Prev. buttons can be used to change the FM channels.
AUX-IN
The speaker can be connected to an audio device using an RCA to 3.5mm cable. Connect one end of the cable to the speaker & connect the other end of the cable to an audio source. The songs from the audio source can be heard through the speaker.
