Custom shop - Lynx Studio Technology, Inc.
Lynx Studio Technology, Inc.
Owner's Manual for Lynx models including: LM-A24 Analog I O Module, LM-A24, Analog I O Module, I O Module, Module
Lynx Studio LM-A24 купить в Киеве | UNITED MUSIC
Lynx Studio LM-A4 купить в Нур-Султане | UNITED MUSIC
Lynx Studio LM-A24 купить в Москве | UNITED MUSIC
File Info : application/pdf, 2 Pages, 1.23MB
DocumentDocumentSpecialty Analog Modules for Lynx Aurora(n) Converter The LM-A24 module expands the capabilities of the Aurora(n) platform by providing two line inputs and four monitor outputs on TRS connectors. The outputs incorporate precise level control making them ideal for driving monitor speakers or interfacing with other studio devices. The module easily integrates with other I/O channels since its transparent performance matches previous Aurora(n) line-level modules. The LM-A4 is an output-only module which is a lower cost option for applications that do not require additional inputs. The LM-A24 and LM-A4 are specialty analog modules that provide linelevel I/O on TRS connectors. Designed to the same exacting standards Lynx converters are known for, they offer pristine transparency, excellent imaging, and ruler-flat frequency response. These modules provide an excellent solution for installations requiring a small number of dedicated I/O's without the requiring an additional breakout cable. They also offer I/O levels up to +24dBu for extended compatibility with other pro studio equipment. An excellent example application is providing separate monitor outputs when other Aurora(n) line outputs are being fed to a summing mixer. The outputs can easily drive powered monitors and offer precise level control via a low-distortion, digitally-controlled analog attenuator. This analogdomain attenuator maintains a high signal-to-noise ratio over the adjustment range. Monitor speaker protection is provided by output anti-pop relays. The output-only LM-A4 is an excellent companion to the four-channel LMPRE4 input-only module. The combination of these two modules allows for the configuration of a lower cost 4-in/4-out Aurora(n) which is ideal for smaller studios and podcasters. This can also act as a starter configuration with plenty of room for adding more channels of line-level, AES/EBU, or ADAT I/O. Input trims, output levels, signal routing and mixing are easily controlled from the Aurora(n) front panel or using Lynx's NControl application on any Windows or Mac computer. LM-A24/LM-A4 FEATURES · Lynx proprietary 24-bit A/D and D/A conversion · Four electronically balanced outputs on TRS · Output level adjustments in 0.5dB increments up to +24dBu · Two electronically balanced inputs accept levels up to +24Bu on TRS (LM-A24 only) · Fully-differential transparent design · Line level performance identical to LM-AIO8E · Anti-pop relays on outputs for silent power-ups and -downs · Seamless integration with Aurora(n)'s mixing and routing engine See the Lynx Aurora(n) configurator at lynxstudio.com/custom-shop for all Aurora(n) configurations. LYNX STUDIO TECHNOLOGY www.lynxstudio.com Aurora(n) front panel. Aurora(n) rear panel with LM-A24 module. LM-A24/LM-A4 SPECIFICATIONS THD+N 1kHz, -1dBFS, 20kHz filter Dynamic Range A-weighted, -60dBFS method Frequency Response Deviation over 20-20kHz band, -1dBFS Crosstalk Adjacent channel, -1dBFS, 1kHz Common Mode Rejection -1dBFS, 60Hz and 1kHz . Full-scale Trim Settings Output Level Connector LINE INPUT (LM-A24) -113dB (+20dBu trim) 119dB ±0.010dB -130dB max. Greater than 80dB +20dBu, +24dBu N/A Electronically Balanced TRS All measurements made with Audio Precision SYS-2722 Audio Analyzer LINE OUTPUT (LM-A24 & LM-A4) -108dB (+20dBu FS setting) 120dB ±0.025dB -130dB max N/A N/A -71.5dBu to +24dBu (adjustable in 0.5dB increments in the analog domain) Electronically Balanced TRS SUGGESTED RETAIL PRICES LM-A24 $750 LM-A4 $575 See the Lynx Aurora(n) configurator at lynxstudio.com/custom-shop for all Aurora(n) configurations. L LYNX STUDIO TECHNOLOGY www.lynxstudio.com