RS-232 - Mitutoyo - USB Communication Adapters - Mark-10
Mark-10 Force and Torque Measurement
Installation Guide for MARK-10 models including: RSU100, MU100, RSU100 Communication Adapters USB Drive, Communication Adapters USB Driver, Adapters USB Driver, USB Driver
RS-232 - Mitutoyo - USB Communication Adapters - Mark-10
File Info : application/pdf, 1 Pages, 334.85KB
DocumentDocumentCommunication Adapters - USB Driver Installation Instructions Model RSU100 RSU100 converts RS-232 signals into USB, typically used for transmitting data from a Mark-10 test stand control panel to data collection software on a PC. A USB cable is included. Follow these instructions to install the USB driver: 1. Go to mark-10.com/products/accessories/power-communication/communication-adapters/ 2. Under Downloads, click Mark-10 USB Driver (ZIP file). 3. Extract the files, then run the USB Driver installer, "Mark-10USBInstaller_x64.exe". Follow the instructions on the screens. Complete instructions are available at mark-10.com/downloads/product-downloads/manualUSBDriver.pdf 4. After installation is complete, connect the RSU100 and USB cable to a USB port on the PC. 5. Windows will assign a COM port number, identified in Device Manager > Ports. Model MU100 MU100 converts Mitutoyo signals into USB, typically used for transmitting data from a Mitutoyo travel display on a Mark10 test stand to data collection software on a PC. Cable part no. AC1105 is required between the Mitutoyo device and MU100. Follow these instructions to install the USB driver: 1. Go to mark-10.com/products/accessories/power-communication/communication-adapters/ 2. Under Downloads, click MU100 USB Driver (ZIP file). 3. Extract the files, then run the USB Driver installer, "MU100_USB_Driver.exe". Follow the instructions on the screens. 4. After installation is complete, connect the MU100 to a USB port on the PC. 5. Windows will assign a COM port number, identified in Device Manager > Ports. Mark-10 Corporation n www.mark-10.com n info@mark-10.com Toll-free: 888-MARK-TEN n Tel: 631-842-9200 n Fax: 631-842-9201 32-1248 REV 0223