OKIN JLDQ.20 Single Drive Linear Actuator
German Quality: Better components, better furniture
A DewertOkin Technology Brand
Product Overview
The OKIN JLDQ.20 is a high-quality single drive linear actuator designed for furniture applications.
Key Features:
- Input Voltage: 24-29V DC
- Max Load Capacity: 4000N
- Speed Range: 7-52 mm/sec
- Noise Level: Less than 50dB [?]
Specifications
| Input Voltage | 24-29V DC |
| Duty cycle | 1 min on / 8 min off |
| Min install size | Stroke + 130mm |
| Stroke | 20 - 500mm |
| Applications | Footrest, Headrest, Lumbar |
| Certifications | UL, CE, RoHS, RCM, CB |
Technical Drawings and Dimensions
The following describes the key dimensions and mounting information for the JLDQ.20 actuator:
Side View and Mounting Details:
The actuator is shown in an extended state. Key dimensions include:
- Stroke end dimension: 26mm
- Mounting hole diameter: 6mm
- Mounting hole center to end: 10.1mm
- Actuator body width: 28.5mm
- Mounting bracket width: 45mm
This section illustrates the "Mounting dimension" for attachment.
Retracted State and Stroke Indication:
The actuator is shown in a retracted state. Key dimensions include:
- Overall length in retracted state: 150mm
- Mounting bracket width: 64.5mm
- The drawing also indicates the "Stroke" length, showing the range of movement.
Overall Actuator Dimensions:
A comprehensive view shows the actuator with various measurements:
- Overall length (likely extended or maximum): 460mm
- Other dimensions shown include 9mm, 1.5mm, 11.5mm, 12mm, 12mm, 300mm, 100mm.
