Assembly Instructions
Introduction & Support
Your satisfaction is our top priority. If you encounter any issues with this product, such as missing or damaged parts, we're here to help. Please retain the original packaging and take photos of the packaging and the product, then contact us as soon as possible.
Warm Tips
- Carefully read these instructions and keep them for future reference.
- Check the parts list and confirm everything's there before starting assembly.
- When assembling, put all parts on a soft, smooth surface like a carpet to avoid scratches.
- Don't fully tighten screws until all parts are confirmed in place to avoid misalignment.
Important Recommendations
We recommend using hand tools for assembly. If an electric screwdriver is used, reduce power and torque to avoid damage to the product. ?️ [hand tools recommended] vs. ⚡ [electric drill] ❌ [not recommended].
AVOID SCRATCHES: In order to avoid scratching, this furniture should be assembled on a soft surface, such as a rug. ❌ [scratching hazard] vs. ✔️ [soft surface recommended].
Parts List
| Part No. | Description | Quantity |
|---|---|---|
| 1 | Top/Bottom Panel | 1 pc |
| 2 | Bottom Panel | 1 pc |
| 3 | Side Panel | 2 pcs |
| 4 | Back Panel | 1 pc |
| 5 | Shelf | 1 pc |
| 6 | Base Front Rail | 1 pc |
| 7 | Base Side Rail | 1 pc |
| 8 | Base Back Rail | 1 pc |
| 9 | Support Rail | 2 pcs |
| 10 | Door Frame | 2 pcs |
| 11 | Door Panel | 2 pcs |
| 12 | Base Side Rail | 2 pcs |
| 13 | Base Front/Back Rail | 2 pcs |
Hardware List
| Code | Description | Quantity |
|---|---|---|
| A | Cam Lock Ø15x12mm | 40 pcs |
| B | Cam Pin M6x40mm | 40 pcs |
| C | Wooden Dowel Ø8x30mm | 24 pcs |
| D | Screwdriver | 1 pc |
| E | Screw M4x25mm | 8 pcs |
| F | Cam Lock Screw | 4 pcs |
| G | Allen Key M4 | 1 pc |
| H | Foot Pad | 28 pcs |
Installation of Cams and Pins
Read each step carefully before starting. Each step of instruction should be performed in the correct order. If these steps are not followed in sequence, assembly difficulties may occur.
Step 1: Insert Cam Pin (B) into the designated hole.
[Diagram: Cam pin (B) being screwed into a panel.]
Step 2: Align the Cam Lock (A) with the Cam Pin (B).
[Diagram: Cam lock (A) positioned over the cam pin (B) head.]
Step 3: Turn the Cam Lock (A) with a screwdriver to secure the connection. Ensure there is "No gap".
[Diagram: Screwdriver turning the cam lock (A) clockwise.]
Step 4: The cam lock is now tightened.
[Diagram: Secured connection with cam lock tightened.]
Screw the pin into the hole. Set the cams correctly by aligning the head of the cams with the lock pins. Lock the cam by turning the cam head with a screwdriver until it is tightened. Please do not use an electric screwdriver to assemble the unit.
Example Assembly Sequence:
Step 1: Insert Cam Pin (B) into panel.
[Diagram: Cam pin (B) inserted into a panel.]
Step 2: Align Cam Lock (A) with Cam Pin (B).
[Diagram: Cam lock (A) aligned with cam pin (B) head.]
Step 3: Tighten Cam Lock (A).
[Diagram: Cam lock (A) tightened.]
Step 1: Assemble Base Frame
Connect parts 5, 6, 7, 12, and 13 using Wooden Dowels (C). Pay attention to the hole positions.
[Diagram: Parts 5 (Shelf), 6 (Base Front Rail), 7 (Base Side Rail), 12 (Base Side Rails), and 13 (Base Front/Back Rails) are shown being joined with dowels (C). Part 5 is a horizontal shelf. Parts 6, 7, 12, 13 form a rectangular base frame.]
Hardware Used: ? [C] x 8 pcs
Step 2: Assemble Main Frame Supports
Connect parts 8 (Base Back Rail) and 9 (Support Rails) using Wooden Dowels (C). Pay attention to the hole positions.
[Diagram: Part 8 (Base Back Rail) and two Part 9 (Support Rails) are shown being joined with dowels (C) to form a rectangular structure.]
Hardware Used: ? [C] x 8 pcs
Step 3: Attach Side Panels to Base
Attach Side Panels (3) to the assembled base structure from Step 1 and Step 2. Use Cam Pins (B) and Wooden Dowels (C).
[Diagram: Two Side Panels (3) are shown being attached to the base structure. Cam pins (B) are inserted into the base, and dowels (C) are inserted into the side panels, which then connect. The diagram also shows the cam lock installation sequence (Step 1-4) for securing these panels.]
Hardware Used: ? [B] x 12 pcs, ? [C] x 8 pcs
Step 4: Assemble Main Cabinet Body
Assemble the main cabinet body using Side Panels (3), Back Panel (4), and Shelf (5). Use Cam Locks (A) and Cam Pins (B).
[Diagram: The main cabinet structure is formed by connecting Side Panels (3) to the Back Panel (4) and Shelf (5). Cam pins (B) are inserted into the side panels, and Cam Locks (A) are used to secure them to the back panel and shelf. The diagram shows the connection points and the cam lock mechanism.]
Hardware Used: ? [A] x 12 pcs, ? [B] x 12 pcs
Step 5: Attach Base Rails
Attach the Base Side Rails (12) and Base Front/Back Rails (13) to the base structure. Use Cam Locks (A), Cam Pins (B), and Cam Lock Screws (F).
[Diagram: The base frame is further reinforced by attaching rails (12, 13) to its sides and front/back. Cam pins (B) are inserted into the rails, and Cam Locks (A) and Cam Lock Screws (F) are used to secure them to the main structure.]
Hardware Used: ? [A] x 4 pcs, ? [B] x 4 pcs, ? [F] x 4 pcs
Step 6: Attach Bottom Panel
Attach the Bottom Panel (2) to the assembled base structure. Use Cam Locks (A) and Cam Pins (B).
[Diagram: The Bottom Panel (2) is placed onto the base structure and secured using Cam Locks (A) and Cam Pins (B). The diagram shows the alignment and connection points.]
Hardware Used: ? [A] x 8 pcs, ? [B] x 8 pcs
Step 7: Prepare Top Panel
Insert Cam Pins (B) into the Top Panel (1).
[Diagram: Cam pins (B) are shown being screwed into the underside of the Top Panel (1).]
Hardware Used: ? [B] x 8 pcs
Step 8: Assemble Cabinet Body (Continued)
Assemble the cabinet body using Side Panels (4), Shelf (5), and the structure from previous steps. Use Cam Locks (A) and Cam Pins (B).
[Diagram: This step shows the assembly of the main cabinet structure using parts 4 and 5, secured with Cam Locks (A) and Cam Pins (B).]
Hardware Used: ? [A] x 8 pcs, ? [B] x 8 pcs
Step 9: Prepare Top Panel for Attachment
Insert Cam Pins (B) into the Top Panel (1).
[Diagram: Cam pins (B) are shown being screwed into the underside of the Top Panel (1). This is similar to Step 7, reinforcing the top panel attachment.]
Hardware Used: ? [B] x 8 pcs
Step 10: Attach Top Panel
Attach the Top Panel (1) to the assembled cabinet body. Use Cam Locks (A) and Cam Pins (B).
[Diagram: The Top Panel (1) is placed onto the assembled cabinet and secured using Cam Locks (A) and Cam Pins (B). The diagram shows the alignment and connection points.]
Hardware Used: ? [A] x 8 pcs, ? [B] x 8 pcs
Step 11: Attach Doors
Attach the Door Frames (10) and Door Panels (11) to the cabinet. Use Screws (E).
[Diagram: The doors (parts 10 and 11) are shown being attached to the front of the cabinet. Screws (E) are used to secure the door hinges or mounting points.]
Hardware Used: ? [E] x 8 pcs
Step 12: Attach Foot Pads
Attach the Foot Pads (H) to the bottom of the assembled unit.
[Diagram: Foot pads (H) are shown being attached to the underside of the base of the cabinet.]
Hardware Used: ⚪ [H] x 28 pcs
Completion
Thank you for your support!
[Image: Line drawing of the fully assembled end table.]
