Instruction Manual for MiBOXER models including: FUT100, FUT100 100 Zone RGB Plus CCT Remote, 100 Zone RGB Plus CCT Remote, RGB Plus CCT Remote, CCT Remote, Remote
Model No.: FUT100. 1. Features. 100 zones remote have LCD which can display dimming figure on the screen. There is new copying func on, copying the linked remote and control lights directly without new pairing process.Remote adopt world-wide used 2.4GHz frequency, GFSK control method, with the features of low power consump on, long distance ...
KPLED s.r.o. - 100 zónový ovladač RGB CCT, 2.4GHz, 2 x AAA, FUT100, Mi-Light
Pult FUT100
Subordinate New Brand 100-Zone RGB+CCT Remote Model No.: FUT100 1. Features 100 zones remote have LCD which can display dimming figure on the screen. There is new copying funcon, copying the linked remote and control lights directly without new pairing process.Remote adopt world-wide used 2.4GHz frequency, GFSK control method, with the features of low power consumpon, long distance transming, strong an-interference and fast communicaon rate. can control specified Mi-Light / MiBoxer smart light, Adjustable light color, color temperature, saturaon, brightness. 2. Products Key Diagram Child lock acvated Current zone Current dynamic mode Current scene Page up Master ON White mode Page down " " Zone ON / Link(Unlink) Save scene 1 Save scene 2 Baery power percentage RGB/CCT figure Brightness figure Saturaon figure Indicator Light RGB slider Saturaon/CCT slider Brightness slider Master OFF Child lock / Copying " " Zone OFF Mode Speed Mode Speed + Dynamic Mode Switch Save scene 3 Turning page: 5 zones in each page, page 1 is 1-5 zones, page 2 is 6-10 zones....page 20 is 96-100 zones Short press to page up; long press to turn page quickly Short press to page down; long press to turn page quickly Example 1: current in page 1, buon related zones Example 2: current in page 6, buon related zones ZONE 1 ZONE 3 ZONE 5 ZONE 2 ZONE 4 ZONE 26 ZONE 28 ZONE 30 ZONE 27 ZONE 29 Touch the slider to adjust light colors. Under white light mode, adjust light color temperature; Under color light mode, adjust color saturaon. Slide the brightness slider to adjust light the brightness. Short press switch to white light mode. Short press: Master On Long press: get max brightness for all zones Short press: Master Off Long press: get night light mode for all zones Long press 3 seconds to lock up/down (Aenon: only "ON" / "OFF" / " I " / " O " will work aer locking up). Short press 5 mes quickly to copy linking code. (review next page to get more details) Short press: turn on current zone Long press: get max brightness for current zone Short press: turn off current zone Long press: get night light mode for current zone Short press dynamic mode switch When in dynamic mode: short press, speed up dynamic mode; When in stac mode: long press, turn off light aer countdown 10min (Countdown is acvated once the light flashes one me). When in dynamic mode: short press, speed down dynamic mode; When in stac mode: long press, turn off light aer countdown 60s (Countdown is acvated once the light flashes one me). SShavoertspcerenses:1s~cesnceenaec3vated Long press 3 seconds: save current color or dynamic mode (saved successfully once light flashes one me slowly) 3. Copying instrucon It can copy one remote quickly, two remotes have same ID and funcon once copying is done. Copying linked remote and control light directly without linking process Only support to copy one 2.4G remote (the old one will be replaced if copying is done again) 1. Short press " " 5 mes quickly to enter into copying mode, LCD screen display "countdown 10 seconds" 2. Short press "ON" or "OFF" buon from 2.4G series remote within 10 seconds 3. Copying is done once LCD screen display " " Dismissed copying: short press " " 10 mes quickly, dismissed successfully once " " on screen flashes 3 mes 4. Linking Code / Unlinking Code Instrucons Aenon: the light must be paired with remote control. Linking Code Instrucons Power Light 1 Switch off light, aer 10 seconds then switch on again. Link / Unlink buon 2 Short press " I " buon 3 mes within 3 seconds when light on. Power Light 3 Lights blink 3 mes slowly means linking is done successfully. Linking failed if light is not blinking slowly, Please follow above steps again. (Note: Light that have linked can't link again) Unlinking Code Instrucons Power Light 1 Switch off light, aer 10 seconds then switch on again. Link / Unlink buon 2 Short press " I " buon 5 mes within 3 seconds when light on. Power Light 3 Lights blink 10 mes quickly means unlinking is done successfully. Unlinking failed if light is not blinking quickly, Please follow above steps again. (Note: Light haven't linked that don't need to unlink) 5. Group control instrucon Pairing lights into different groups, dim and control light flexibly Group control soluon: Press " I " firstly and dim, example as below. 1 2 3 1 2 1 Aenon: 1. Countless lights can be added into each zone. 2. One light only can be paired with one sub zone from anyone remote. 6. Aenon 1. This remote only support Mi-Light / Miboxer 2.4G product series, kindly review light instrucon to check compability. 2. In the using of the remote, if the indicated lamp blinking quickly, Please change the baery in me. Please don't use poor quality baery to avoid the leaking of baery liquid to damage the remote. 3. The remote is accurate electronics, don't use it in humid or high temperature area, When not in use for a long me, remove baery and keep it in dry or free stac electricity environment. 4. Please don't use the remote on the wide-range metal or strong electromagnec wave area, otherwise, it will badly affect the controlling distance. Made in ChinaAdobe PDF library 15.00 Adobe Illustrator CC 22.0 (Windows)