Uponor Smatrix Base PRO R-147 KNX Module

The KNX module facilitates communication between the Uponor Smatrix Base PRO system and the standard KNX bus.

Function

Key Features:

KNX Module Components

Description:

The following illustration shows the star module and its components.

Diagram:

[Image of the Uponor Smatrix Base PRO R-147 KNX module, labeled 'A']

Dimensions:

[Diagram showing dimensions of the module: Overall width 60mm, overall height 50.5mm, overall depth 18mm. Other indicated dimensions include 22.5mm, 45mm, 22.5mm, 51mm, 30.5mm, 62mm, and 98.5mm.]

Technical Data

ParameterSpecification
KNX ModuleR-147 KNX
IP RatingIP20, Class II (IP: degree of protection against water ingress into live parts)
Operating Temperature-5°C to +45°C
Storage Temperature-25°C to +70°C
Relative Humidity (non-condensing)5% to 93%
Weight55 g
Conformity TestsLow Voltage Directive 2014/35/EU
Electromagnetic Compatibility Directive EMC 2014/30/EU
RoHS Directive 2011/65/EU
EN 50581: 2012
EN 50491-5-1:2010
EN 50491-5-2:2010
EN 50491-5-3:2010
EN 61000-6-2:2005
EN 61000-6-3:2007 + A1:2011
KNX Connection29 V DC
KNX Bus Current Consumption10 mA
ETS® CompatibilityETS® version 5 (or newer)
Modbus Power Supply5 V DC from the controller's thermostat bus
Modbus ConnectionA, B - on the controller system bus

Manufacturer Information

Uponor Corporation
Äyritie 20
01510 Vantaa, Finland

Production: Uponor/MRY

As per the policy of continuous improvement and development, Uponor reserves the right to make changes to component specifications without prior notice.

Website: www.uponor.com/pl-pl

PDF preview unavailable. Download the PDF instead.

Uponor PI Smatrix Base PRO R-147 KNX PL 1185147 202001 Antenna House PDF Output Library 7.3.1867

Related Documents

Preview Uponor Smatrix Base PRO R-147 KNX Installation and Operation Manual
This manual provides comprehensive instructions for the installation and operation of the Uponor Smatrix Base PRO R-147 KNX gateway module. It covers system overview, installation procedures, system setup using ETS®, data point lists, troubleshooting, and technical specifications.
Preview Uponor Smatrix Base PRO Trumpa Instrukcija
Trumpa instrukcija Uponor Smatrix Base PRO sistemai, apimanti saugos nurodymus, sistemos aprašymą, montavimą, komponentų prijungimą ir techninius duomenis.
Preview Uponor Smatrix Base PRO X-148 Modbus RTU: Instrukcja Instalacji
Przewodnik instalacji i konfiguracji sterownika Uponor Smatrix Base PRO X-148 z komunikacją Modbus RTU dla systemów zarządzania budynkiem (BMS). Zawiera szczegółowe informacje o funkcjach, zmiennych i rozwiązywaniu problemów.
Preview Uponor Smatrix Base Thermostat D+RH T-247 BUS Installation and Operation Guide
This document provides installation and operational instructions for the Uponor Smatrix Base Thermostat D+RH T-247 BUS, a smart heating control system. It covers mounting, wiring, and basic settings for optimal room climate control.
Preview Uponor Siccus Mini: Ultra-thin Underfloor Heating for Renovation
Discover the Uponor Siccus Mini, an ultra-thin, ultra-fast underfloor heating and cooling system ideal for renovations. Learn about its direct flooring technology, low height, and quick installation.
Preview Uponor Classic Installation Manual
This manual provides detailed installation instructions for the Uponor Classic system, including pipe laying, manifold connection, and pressure testing. It covers essential steps for a successful and efficient installation of the Uponor Classic floor heating system.
Preview Uponor Base Thermostat Digital Programmable T-26, 230 V Quick Guide
A quick guide to the Uponor Base thermostat digital programmable T-26, 230 V, covering setup, scheduling, sensor selection, and operational modes.
Preview Uponor Siccus Mini: Ultra-Thin, Fast Dry Underfloor Heating for Renovation
Discover the Uponor Siccus Mini, an ultra-thin (15mm), fast-reacting dry underfloor heating and cooling system designed for renovation projects. Features direct flooring technology, simplified installation, and compatibility with various floor coverings.