JELLYSUB
Failure to follow instructions carefully may cause damage
Indoor Damage-Free Hanging Surfaces
Glass, metal, tile, varnished wood, and other smooth solid surfaces.
APPLY:
-
Wipe wall with rubbing alcohol, keep it dry and clean.
-
Separate strips, remove liner of one side, stick it to the hook.
-
Remove remaining liner. Press hook firmly to wall for 10 sec.
-
To reinforce strip, temporarily remove hook from wall. Slide hook up and off base. ⬆️
-
Press base firmly for 30 sec.
-
Slide the hook back on, better wait 12 hrs before hanging things. ⬇️
REMOVE:
-
Slide hook up and off. ⬆️
-
Gently hold mounting base in place.
-
❌ Never pull the strip towards you! Pull it straight down. ⬇️
-
Stretch the strip slowly against the wall to release.
Caution:
- ❌ Do NOT use for frame hanging.
- ❌ Do not use on painted wall, wallpaper, fabrics, brick, wet surfaces or other rough/non-stick surfaces.
- ❌ Do not hang over beds.
- ❌ Do not hang valuable, dangerous or breakable items.
- Use indoors +10°C to +40°C and the humidity ≤ 85%.