Siros L Battery Indicator
Description of the battery display
The Siros L battery display provides visual feedback on the battery's status during operation and charging, as well as indicating error messages.
[Image of Siros L battery unit with three indicator lights labeled 1, 2, 3]
- | Battery display illuminated
- * Battery display blinks
- * Error message
During operation
| Indicator Status (1, 2, 3) | Description |
|---|---|
| | | | | Battery fully charged (100%) |
| | | | Battery half-full (ca. 50%) |
| | | Battery almost empty (ca. 20%) |
| * | Battery empty, please recharge (ca. 5%) |
During charging
| Indicator Status (1, 2, 3) | Description |
|---|---|
| * * * | Battery empty and is being recharged |
| | * * | Battery is 50% charged |
| | | * | Battery is 80% charged |
| | | | | Battery is fully charged* |
* The battery is only fully charged when the charge indicator lamp on the charger turns green.
Error message at battery
| Indicator Status (1, 2, 3) | Description |
|---|---|
| * | Battery temperature is too high. Allow battery to cool down. |
| * | Voltage too low. Charge the battery again. |
| * | Voltage too high. Use the battery normally; if the message appears again, send the battery for servicing. |
| * * | Current draw too high. Send monolight and battery for servicing. |
| * * | Short circuit. Send monolight and battery for servicing. |
| * * * | Battery temperature is too low – allow it to warm up. |
| * * * | FET temperature is too high – allow it to cool. If it happens again, send the battery for servicing. |
