Instruction Manual for V-TAC models including: VT-6076S, VT-6076S LED Waterproof Fitting Lamp, LED Waterproof Fitting Lamp, Waterproof Fitting Lamp, Fitting Lamp, Lamp
V-TAC LED-Feuchtraumleuchte VT-6076S, EEK: E, 18W, 2160lm, 6500K, 600mm | 539541
File Info : application/pdf, 2 Pages, 265.26KB
DocumentDocumentINSTRUCTION MANUAL LED WATERPROOF LAMP FITTING TECHNICAL DATA MODEL VT-6076S SKU 2162821, 2162831 WATTS 18W LUMENS 2160 Lm BEAM ANGLE 120° DF 0.7 CRI 80 INPUT POWER AC:200-240, 50/60Hz LIFE SPAN 25,000 Hours ON/OFF CYCLE >15,000 Times MAX CONNECTABLE UNITS 16 DRIVER MA (Input Current) 100mA MATERIAL PC DIMENSION 600x66x58mm VT-1249S 2162841, 2162851 36W 4320 Lm 120° 0.9 80 AC:200-240, 50/60Hz 25,000 Hours >15,000 Times 8 200mA PC 1200x66x58mm VT-1574S 2162861, 2162871 48W 5760 Lm 120° 0.9 80 AC:200-240, 50/60Hz 25,000 Hours >15,000 Times 6 265mA PC 1500x66x58mm INTRODUCTION & WARRANTY Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. This product is warranted for manufacturing defects only. This marking indicates that this product should not be disposed of with other household wastes. Caution, risk of electric shock. MULTI-LANGUAGE MANUAL QR CODE Please scan the QR code to access the manual in multiple languages. In case of any query/issue with the product, please reach out to us at: support@v-tac.eu For More products range, inquiry please contact our distributor or nearest dealers. V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B WARNING 1. Please make sure to turn off the power before starting the installation. 2. Installation must be performed by a qualified electrician. 3. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced. 4. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusive- ly replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. 5. Terminal block not included. To be connected with Waterproof Cable Hose INSTALLATION INSTRUCTION 1. Switch OFF the power before starting the installation. 2. Fasten the two mounting clips to installation surface. 3. Open end cap and take out the connector (FIG 1). 4. Link to power source (FIG 2). 5. Cover back end cap 6. Install the lamp to the mounting clips (FIG 3). 7. Hanging installation type reference (FIG 4). 8. Switch ON the power to test the light. 1 2 3 4 LINKABLE CONNECTION