Philips Shaver Series 5000

Introduction

This instruction manual provides guidance for the Philips Shaver Series 5000. It covers various models including S5898, S5889, S5887, S5886, S5885, S5884, S5583, S5882, S5881, and S5880. For further support and information, please visit www.philips.com/support/ifu.

Product Overview and Components

The Philips Shaver Series 5000 is an electric shaver designed for personal grooming. The package typically includes the shaver, various attachments, a cleaning brush, a charging stand, a travel case, and a power cord.

Key Components & Accessories:

• Shaver Unit: The main electric shaver device.
• Trimmer Attachment: For trimming beards, mustaches, and sideburns.
• Nose Trimmer Attachment: For precise trimming of nose and ear hair.
• Cleaning Brush: For cleaning the shaver heads.
• Cleaning Station: An optional accessory for automatic cleaning and charging.
• Travel Case: For protecting and transporting the shaver.
• Power Cord & Charging Stand: For recharging the shaver's battery.

Model Compatibility Table

The following table indicates the included accessories for different model variants of the S588X and S589X series:

Note: Checkmarks (✔️) indicate the presence of the accessory.

Getting Started: Charging the Shaver

Step 1: Connect the charging stand. Place the charging stand on a flat surface. Connect the power cord to the charging stand and then plug it into a power outlet. The indicator light on the shaver will illuminate to show it is charging.

Step 2: Place the shaver on the stand. Ensure the shaver is correctly positioned on the charging stand.

Step 3: Charging indicator. The battery indicator on the shaver will show the charging status. A full charge typically takes about 1 hour.

Charging Time:

• A 5-minute charge provides enough power for one quick shave.
• A full charge (1 hour) provides approximately 60 minutes of cordless shaving time.

Using the Shaver

Dry Shaving:

1. Ensure the shaver is dry.
2. Press the power button [power button] to turn the shaver on.
3. Shave by moving the shaver head gently over the skin in a circular motion.
4. Press the power button [power button] again to turn the shaver off.

Wet Shaving (with foam or gel):

1. Apply shaving foam or gel to your skin.
2. Turn the shaver on.
3. Shave as usual.
4. Rinse the shaver head under running water after use.

Shaving Tips:

• For the best results, stretch the skin taut with your free hand.
• Hold the shaver at a right angle to your skin.
• Move the shaver gently over your face and neck.
• For sensitive areas, use a lighter touch.

Cleaning the Shaver

Regular cleaning ensures optimal performance and hygiene.

Cleaning the Shaver Head:

1. Rinse under water: After each use, rinse the shaver head under warm running water [water symbol].
2. Open the shaving heads: Open the shaving head unit by pressing the release button.
3. Clean the cutters: Gently remove the cutters and guards. Use the cleaning brush [brush symbol] to clean any hair or debris from the cutters and the inside of the shaving head unit.
4. Reassemble: Place the cutters back into their guards, ensuring correct alignment, and then reinsert them into the shaving head unit. Close the shaving head unit until it clicks.
5. Dry the shaver: Shake off excess water and allow the shaver to air dry completely. Do not use a towel to dry the shaving heads as this can damage them.

Cleaning the Shaver Body: Wipe the shaver body with a dry, soft cloth. Do not immerse the shaver body in water.

Using the Cleaning Station (if applicable)

The cleaning station automatically cleans, lubricates, dries, and charges your shaver.

Step 1: Prepare the cleaning station. Open the cleaning station by pressing the release button. Remove the cleaning cartridge. Remove the protective film from the new cartridge and insert it into the station.

Step 2: Place the shaver in the station. Place the shaver into the cleaning station, ensuring it is correctly seated.

Step 3: Select cleaning program. Press the button on the cleaning station to start the cleaning cycle. The station will indicate the program status.

Step 4: Cleaning cycle. The station will perform a cleaning cycle, which typically takes several minutes. The shaver will then dry and begin charging.

Step 5: Maintenance. Replace the cleaning cartridge every 3 months or as indicated by the station.

Using the Trimmer Attachments

Precision Trimmer:

1. Attach the desired trimmer comb or use the trimmer without a comb for precision edging.
2. Turn the shaver on.
3. Gently move the trimmer over the hair you wish to style or remove.
4. Clean the trimmer attachment after use.

Nose Trimmer:

1. Attach the nose trimmer attachment to the shaver handle.
2. Insert the tip of the trimmer gently into the nostril or ear canal.
3. Turn the shaver on and move the trimmer slowly to trim unwanted hair. Do not insert the trimmer too deeply.
4. Clean the nose trimmer attachment after use.

Important: Always ensure attachments are securely attached before use. Clean attachments after each use.

Maintenance and Replacement

Replacing Shaving Heads: For optimal performance, it is recommended to replace the shaving heads every 12 months. The shaver may indicate when replacement is needed.

1. Open the shaving head unit.
2. Remove the old shaving heads.
3. Insert the new shaving heads, ensuring they are correctly oriented.
4. Close the shaving head unit.

Cleaning Cartridge Replacement: If using a cleaning station, replace the cleaning cartridge approximately every 3 months (1x / 3M) or as indicated by the device.

Locking and Unlocking the Shaver

The travel lock feature prevents the shaver from accidentally turning on.

To Lock: Press and hold the power button [power button] for 3 seconds. The lock indicator [locked symbol] will appear.

To Unlock: Press and hold the power button [power button] for 3 seconds. The lock indicator will disappear.

Safety and Disposal

Safety Precautions:

• This appliance can be used by children aged 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Do not use the appliance if it is damaged.
• Do not immerse the appliance or charging cord in water or other liquids.
• This appliance is suitable for cleaning under running tap water [water symbol].

Disposal:

This product contains a rechargeable battery. Dispose of the product and its battery responsibly according to local regulations. The product is made of recyclable materials. Look for the recycling symbol [recycle symbol].