Yes Huddle XS 4G LTE Quick Start Guide
Items inside the box
The box contains the following items:
- Yes Huddle XS 4G LTE Mobile Hotspot
- USB Cable
- USB Power Adapter
- Quick Start Guide
Device Components:
The Huddle XS 4G LTE device features several indicators and controls:
- Single Indicator (LED)
- TX/RX indicator (LED)
- Wi-Fi Indicator (LED)
- WPS Indicator (LED)
- Power Key / Battery Indicator (Button/LED)
- WPS Key (Button)
- Micro USB Port (for charging)
LED Indicator Guide
| Indicator | Status | Description |
|---|---|---|
| Signal indicator | Blinking Red | Out of service / No SIM card Inserted |
| Solid Green | Connected with high signal strength | |
| Solid Blue | Connected with medium signal strength | |
| Power key/ Battery indicator | Solid Green | High battery level / Fully charged |
| Solid Red | Low battery level | |
| Blinking Green | Charging with high battery level | |
| Blinking Red | Charging with low battery level | |
| Blinking Red/ Green/Blue/Off | Charging with device power turned off | |
| TX/RX indicator | Blinking White | Data transmitting |
| Solid White | Client connected | |
| Off | No client connected | |
| Wi-Fi indicator | Solid White | Wi-Fi enabled |
| Off | Wi-Fi disabled | |
| WPS indicator | Solid White | WPS enabled |
| Off | WPS disabled |
Setup the Huddle XS 4G LTE: Insert SIM
Follow these steps to prepare your device:
- Remove the back cover of the Huddle XS 4G LTE.
- Insert the SIM card into the designated slot as shown in the diagram (visual representation of SIM card insertion).
- Turn on your Huddle XS 4G LTE by pressing and holding the power key for 2-3 seconds.
To Charge
To charge your device:
- Connect your Huddle XS 4G LTE to an electrical outlet using the supplied power adapter and USB cable. The power light on the device will flash red when charging with a low battery, or flash green otherwise.
- Once the battery is fully charged, the power light will turn solid green.
Connecting to your Huddle XS 4G LTE
Connect your computer to the Huddle XS 4G LTE WiFi hotspot:
- With your computer's WiFi turned on, view the list of available WiFi networks.
- Select the network named Yes4G Huddle LTE - XXXX (refer to the back of the device for the exact name).
- Enter the WiFi password as stated on the device.
Note: To change the WiFi SSID and password, please proceed to the setup section.
Setup using Web Browser
Configure your device settings via a web browser:
- Enter the address http://192.168.1.1 into your web browser's address bar while connected to the Huddle XS 4G LTE WiFi hotspot.
- The default username and password is admin.
- Follow the on-screen instructions to complete the setup process.
Setup using Yes Device Manager App
Use the dedicated mobile application for setup:
- Download the "Yes Device Manager" app from the [App Store] or [Google Play Store].
- Connect to the WiFi Hotspot of the Huddle XS 4G LTE.
- Launch the app and follow the instructions to complete the setup.
Congratulations!
You are now successfully connected to the Yes 4G LTE network.
For More Information
For detailed terms and conditions, and warranty statements, visit: www.yes.my/tnc
Get the MyYes app now
Manage your account, enjoy rewards, pay your bill, and get assistance from YesCare by downloading the MyYes app.
Download on the [App Store]
Get it on the [Google Play Store]
