Instruction Manual for BRAINZ models including: 38529, Rythm Speaker
en brainz rythm speaker instruction manual please read all instructions carefully and retain for future use what you need - usb cable (included)
38529 - BRAINZ Rythm Speaker Black - BRAINZ
EN BRAINZ RYTHM SPEAKER INSTRUCTION MANUAL PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE What you need - USB Cable (included) - USB Adaptor (not included) - Mobile phone or other Bluetooth enabled device (not included) How to charge it Connect the supplied cable to the speaker and connect the USB side to a power source. Once you have done this, a red light will light up under the speaker. This means that the speaker is charging. The speaker is fully charged when the light under the speaker turns off. How to set it up Press and hold the button with the ' ' icon for 3 seconds to turn the speaker on. The speaker will appear under your new Bluetooth connections on your phone as BRAINZ Speaker S35. By clicking on it, your phone will connect and the speaker is ready for use. Volume The '+' button increases the volume. Use the '-' button to decrease the volume. Pause To pause the music, press the pause button (middle button) under the speaker. You can resume music the same way. Incoming call If you receive a call while connected to the speaker, simply press the 'Phone' button underneath the speaker and it will pick up the call. You can now talk through the speaker thanks to the built-in microphone. Hanging up To hang up, press the 'Phone' button for a few seconds. To turn off You can turn the speaker off by pressing the button with the ' ' icon for 3 seconds. This manual applies to article number 38529. For more information about this product, please visit www.brainz-electronics.nl NL BRAINZ RYTHM SPEAKER GEBRUIKSAANWIJZING GELIEVE DE INSTRUCTIES ZORGVULDIG TE LEZEN EN TE BEWAREN VOOR LATER GEBRUIK Dit heeft u nodig · USB Kabel (inbegrepen) · USB-adapter (niet inbegrepen) · Mobiele telefoon of ander apparaat met Bluetooth (niet inbegrepen) Zo laadt u het op Verbind de meegeleverde kabel aan de speaker en verbind de USB-zijde aan een voedingsbron. Als u dit gedaan heeft begint er een rode lamp onder de speaker te branden. Dit betekent dat de speaker aan het opladen is. De speaker is volledig opgeladen op het moment dat het licht onder de speaker uitgaat. Zo stelt u het in U zet de speaker aan door de knop met de ` -pictogram' drie seconde ingedrukt te houden. De speaker zal onder uw nieuwe Bluetooth connecties op uw telefoon verschijnen als BRAINZ Speaker S35. Door hierop te klikken maakt uw telefoon verbinding en is de speaker klaar voor gebruik. Volume Met de `+'-knop kunt u het volume harder zetten. Met de `-`knop kunt u het volume zachter zetten. Pauzeren Om de muziek te pauzeren drukt u op de Pauze-knop (middelste knop) onder de speaker. Op dezelfde manier kunt u de muziek ook weer hervatten. Inkomende oproep Als u gebeld word terwijl u verbonden bent met de speaker hoeft u simpelweg op de `Telefoon'-knop te drukken onder de speaker en zal deze uw oproep beantwoorden. Nu kunt u praten door de speaker dankzij de ingebouwde microfoon. Ophangen Als u wilt ophangen moet u de `Telefoon'-knop voor een aantal seconden indrukken. Uitzetten U kunt de speaker uitzetten door de knop met de ` -pictogram' drie seconde ingedrukt te houden. Deze handleiding is van toepassing op artikelnummer 38529. Meer informatie over dit product vindt u op www.brainz-electronics.nlMicrosoft Word voor Microsoft 365