ABUS 6950AM Bicycle Frame Lock

Introduction

Thank you for choosing this ABUS product! Please read this guide carefully before installation and use. Keep these instructions and provide all users with instruction on how to use it. Failure to observe these instructions can lead to injury!

Important Safety Information

Mounting Guidelines

Only mount the lock on suitable frames and in positions where it does not interfere with riding. Do not mount the lock on carbon frames, the front frame, or obviously defective struts.

There must be a distance of at least 6 mm (? ≥ 6 mm) between the fitted lock and the moving parts of the bike.

Make sure that there is no dirt or foreign material on the lock each time before use. Check the lock regularly to ensure that it is mounted securely.

The lock must be closed when the bike is transported on a car. ?

Installation Options

Option 1: Direct Frame Mounting

1. Select a suitable mounting position (Opt. A or Opt. B) on the bicycle frame.
2. Secure the lock using the provided screws and appropriate tools (Hex 2.5, Hex 4).
3. Tighten screws to a torque of 2 Nm.

Option 2: Mounting with ABUS FMU (Frame Mounting Unit)

1. Attach the ABUS FMU to the bicycle frame using the appropriate screws and tools (Hex 2.5, Hex 4).
2. Tighten FMU screws to a torque of 2 Nm.
3. Remove any necessary adapter from the lock or FMU as indicated.
4. Attach the lock to the mounted FMU.
5. Ensure the lock is securely fastened.

Operating the Lock

1. Insert the key into the lock.
2. Turn the key to unlock the mechanism. Listen for the "2. click!" sound.
3. Ensure the lock is fully open before attempting to remove it or operate the bike.

Opening the Lock

To open the lock, insert the key, turn it, and hold the key in the open position.

Using with an Additional Chain (Optional)

⚠️ Important: If using an additional chain, always remove it completely before riding your bicycle.

Disposal

Dispose of the product at the end of its service life in accordance with applicable legal requirements. Please contact your local authority for disposal information.

Warranty

ABUS products are designed, manufactured, and tested with great care. The warranty covers faults caused by material or manufacturing defects. ABUS will repair or replace defective products at its discretion. The warranty ends with the expiration of the original warranty period. ABUS is not liable for defects or damage caused by external influences, improper use, normal wear and tear, or non-compliance with these instructions. For warranty claims, please provide the original purchase receipt and a written description of the fault.