iFLYTEK AINOTE Air 2 Quick Instructions
Introduction
Thank you for purchasing the iFLYTEK AINOTE Air 2. This quick start guide will help you get started with your new device.
Device Overview
The iFLYTEK AINOTE Air 2 features an 8.8-inch E-Ink display. The device dimensions are approximately [Height] x [Width].
Key controls and ports are located as follows:
- Power Button (1): Used to turn the device on or off.
- Volume Up Button (2): Increases the volume.
- Volume Down Button (3): Decreases the volume.
- USB Type-C Port (4, 10): For charging and data transfer.
- Speaker Grille (11): For audio output.
- Microphone Hole (12): For audio input.
The device has a thickness of approximately [Thickness].
Getting Started
Power On/Off
Press and hold the Power button (1) to turn the device on or off.
Volume Adjustment
Use the Volume Up (2) and Volume Down (3) buttons to adjust the volume.
Charging
Connect the USB Type-C cable to the USB Type-C port (4 or 10) and a compatible power adapter. The charging indicator will light up during charging.
Important Notes & Attention
Please read this manual carefully before using the device. Keep it for future reference.
- Avoid exposing the device to extreme temperatures, direct sunlight, or moisture.
- Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.
- Ensure you use only the provided accessories or certified compatible accessories.
- This device is not a toy. Keep out of reach of children.
Further Information
This quick guide provides basic instructions. For more detailed information, please refer to the full user manual available on the iFLYTEK website or through the device's support section.