Bose SoundLink Revolve Owner's Guide

Important Safety Instructions

Please read and keep all safety, security, and use instructions. Bose Corporation declares this product complies with essential requirements of Directive 2014/53/EU and other applicable EU directives. The complete declaration of conformity is available at: www.Bose.com/compliance

Important Safety Instructions:

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not install near heat sources (radiators, heat registers, stoves, or other apparatus including amplifiers).
6. Use only manufacturer-specified attachments/accessories.
7. Unplug during lightning storms or when unused for long periods.
8. Refer all servicing to qualified personnel. Servicing is required for damage such as power-supply cord or plug damage, objects fallen into the apparatus, abnormal operation, or dropping.

WARNINGS/CAUTIONS:

• [High Voltage Symbol] This symbol indicates uninsulated, dangerous voltage within the product enclosure that may constitute a risk of electrical shock.
• [Information Symbol] This symbol indicates important operating and maintenance instructions in this guide.
• This product contains magnetic material. Consult your physician regarding potential effects on implantable medical devices.
• Keep the product away from fire and heat sources. Do NOT place naked flame sources, such as lighted candles, on or near the product.
• Do NOT make unauthorized alterations to this product.
• Do NOT use a power inverter with this product.
• Use this product only with the provided power supply.
• Ensure the mains plug or appliance coupler used as a disconnect device remains readily operable.
• Do not expose products containing batteries to excessive heat (e.g., direct sunlight, fire).
• The product label is located on the bottom of the product.

Regulatory Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Bose Corporation could void the user's authority to operate this equipment.

This device complies with part 15 of the FCC Rules and with ISED Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device complies with FCC and ISED Canada radiation exposure limits set forth for general population. This equipment should be installed and operated with a minimum distance of 20 cm between radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Meets IMDA Requirements. CAN ICES-3(B)/NMB-3(B)

Management Regulation for Low-power Radio-frequency Devices

Article XII: According to "Management Regulation for Low-power Radio-frequency Devices," without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power, or alter original characteristics and performance of approved low power radio-frequency devices.

Article XIV: Low power radio-frequency devices shall not influence aircraft security and interfere with legal communications. If found, the user shall cease operating immediately until no interference is achieved. Legal communications means radio communications operated in compliance with the Telecommunications Act.

Low power radio-frequency devices must be susceptible to interference from legal communications or ISM radio wave radiated devices.

Do not attempt to remove the rechargeable lithium-ion battery. Contact your local Bose retailer or other qualified professional for removal.

[Recycling Symbol] Please dispose of used batteries properly, following local regulations. Do not incinerate.

[Recycling Symbol] This symbol means the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health, and the environment. For more information on disposal and recycling, contact your local municipality, disposal service, or the shop where you bought this product.

Removal of the rechargeable lithium-ion battery should be conducted only by a qualified professional. Please contact your local Bose retailer or see products.bose.com/static/compliance/index.html for further information.

China Restriction of Hazardous Substances Table

This table is prepared in accordance with SJ/T 11364. 'O' indicates the substance is below the limit requirement. 'X' indicates the substance is above the limit requirement.

Taiwan Restriction of Hazardous Substances Table

Equipment name: Bose® SoundLink® Revolve Bluetooth® speaker, Type designation: 419357

Note 1: "o" indicates the percentage content does not exceed the reference value. Note 2: The "-" indicates the restricted substance corresponds to the exemption.

Please complete and retain for your records

Serial number: ______________________________________________________________________

Model number: ______________________________________________________________________

Keep your receipt with your owner's guide. Register your Bose product at global.Bose.com/register.

Security Information

This product can receive security updates from Bose automatically when connected to the Bose Connect app. To receive updates via the app, complete the product setup process. If not completed, you are responsible for installing updates available via btu.bose.com.

Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture (e.g., "0" is 2010 or 2020).

China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plant 9, No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone.

EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands.

Taiwan Importer: Bose Taiwan Branch, 9F-A1, No.10, Section 3, Minsheng East Road, Taipei City 104, Taiwan. Phone Number: +886-2-2514 7676.

Mexico Importer: Bose de México, S. de R.L. de C.V., Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000 México, D.F. Phone Number: +5255 (5202) 3545.

Legal Information

Android and Google Play are trademarks of Google LLC. Apple, the Apple logo, iPad, iPhone, iPod, and Siri are trademarks of Apple Inc. App Store is a service mark of Apple Inc. The trademark “iPhone” is used in Japan with a license from Aiphone K.K.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under license.

The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and other countries.

Bose Corporation Headquarters: 1-877-230-5639.

©2020 Bose Corporation. No part of this work may be reproduced, modified, distributed or otherwise used without prior written permission.

Contents

The Bose® Connect App

• Features (Page 10)

Getting Started

• Unpacking (Page 11)
• Placement guidelines (Page 12)
• Connecting to power (Page 13)
• Powering on/off your speaker (Page 13)

Control Buttons

• Media playback functions (Page 15)
• Call functions (Page 15)
• Accessing voice control (Page 15)
• Voice alerts (Page 15)

Setting Up Voice Prompts

• Pre-installed languages (Page 16)
• Selecting a language (Page 16)
• Changing the language (Page 16)
• Disabling voice prompts (Page 16)

Bluetooth® Technology

• Choosing your pairing method (Page 17)
• Pairing your mobile device (Page 18)
• Pairing a mobile device with NFC (Page 19)
• Pairing an additional mobile device (Page 20)
• Disconnecting a device (Page 20)
• Reconnecting a device (Page 20)

Managing Multiple Connections

• Identifying connected mobile devices (Page 21)
• Switching between two connected devices (Page 21)
• Connecting a previously paired device (Page 21)
• Clearing the speaker pairing list (Page 21)
• Using the Bose® Connect app (Page 21)

Wired Connections

• Connect the 3.5mm stereo cable (Page 22)
• Connect the USB cable (Page 22)

Operating on Battery Power

• Battery protection mode (Page 23)
• Auto-off setting (Page 23)
• Disabling auto-off (Page 23)

Status Indicators

• Battery indicator (Page 25)
• Bluetooth® indicator (Page 25)
• Input indicator (Page 25)

Pairing Bose® Speakers Together

• Pairing the speakers using the Bose® Connect app (recommended) (Page 26)
• Pairing the speakers manually (Page 26)
  • Party mode (Page 26)
  • Stereo mode (Page 27)
  • Switching between Party mode and Stereo mode (Page 28)
  • Disabling Party mode or Stereo mode (Page 28)

Care and Maintenance

• Cleaning (Page 29)
• Customer service (Page 29)
• Limited warranty (Page 29)
• Technical information (Page 29)

Troubleshooting

• Common solutions (Page 30)
• Resetting your speaker (Page 32)

The Bose® Connect App

Download the free Bose® Connect app to easily manage Bluetooth® connections, unlock features, and access future updates.

Features

• Easily connect to and switch between multiple mobile devices with a single swipe.
• Disable voice prompts.
• Customize speaker settings, like voice prompt language.
• Configure your speakers to play in Party mode or Stereo mode.
• Compatible with most Apple and Android™ systems.
• Keep your speaker up-to-date with the latest software.

Getting Started

Unpacking

Carefully unpack the carton and confirm that the following parts are included:

• SoundLink® Revolve speaker
• USB power supply*
• USB cable
• AC power adapters*

*The USB power supply and AC power adapters may vary slightly. Use the AC power adapter for your region. If any part is damaged, do not use it. Contact your authorized Bose® dealer or Bose customer service (see page 29).

Placement guidelines

• For best Bluetooth® performance, place your mobile device within 33 ft. (10 m) of your speaker, ensuring a clear line of sight. Moving your device farther away or losing line of sight may impact sound quality and cause disconnection.
• Keep other wireless equipment at least 3 ft. (1 m) away from your speaker.
• Place your speaker and device away from metal cabinets, other audio/video components, and direct heat sources.

CAUTIONS:

• Stand your speaker on its base. Standing it on any other side may cause damage and affect sound quality.
• Avoid placing your speaker on wet or dirty surfaces.

Connecting to power

Your speaker ships with a partial charge. Before first use, connect it to an AC (mains) outlet. The speaker does not need to be fully charged but requires initial connection to activate the battery.

1. Plug the small end of the USB cable into the micro-B USB connector on your speaker.
2. Plug the other end into the USB power supply.
3. Plug the USB power supply into an AC (mains) outlet.

Note: If necessary, plug the AC adapter for your region into the AC (mains) outlet. The battery indicator blinks amber, and your speaker emits a tone. When fully charged, the indicator glows green.

Powering on/off your speaker

On the button pad, press the [Power Button] (⏻).

• The first time you power on your speaker, the Bluetooth® indicator glows blue, and you hear a voice prompt to select a language (see page 16).
• If already powered on and paired with at least one mobile device, the Bluetooth® indicator blinks white and connects to the last two paired mobile devices. You will hear “Battery percent. Connected to .” The Bluetooth® indicator glows solid white.

Control Buttons

The button pad enables you to power on your speaker and control playback, volume, and speakerphone functions. Note: Certain mobile devices may not support these functions.

Button Layout:

• [Power Button] (⏻): Located at the top center.
• [Bluetooth Button] (): Located to the left of the power button.
• [Input Mode Button] (⊕): Located to the right of the power button.
• [Volume Down Button] (-): Located below the Bluetooth button.
• [Volume Up Button] (+): Located below the Input mode button.
• [Multi-function Button] (●●●): Located at the bottom center.

Media playback functions

Note: In Input mode, pressing the Multi-function button mutes the audio (see page 22).

Call functions

Accessing voice control

The microphone in the speaker acts as an extension of your smartphone's microphone. Using the [Multi-function Button] on the speaker, you can access voice control on your mobile device to make/take calls, play music, check the weather, get game scores, and more.

Press and hold the [Multi-function Button] to access voice control on your device. You will hear a tone indicating voice control is active.

Voice alerts

Your speaker identifies incoming callers (when applicable). To disable this feature, see page 16.

Setting Up Voice Prompts

Voice prompts guide you through the Bluetooth® pairing and connecting processes.

Pre-installed languages

• English
• Spanish
• French
• German
• Mandarin
• Japanese
• Korean
• Italian
• Portuguese
• Swedish
• Dutch
• Russian
• Polish

Selecting a language

1. Press the [Volume Down Button] (-) or [Volume Up Button] (+) to scroll through available languages.
2. When you hear your language preference, press and hold the [Multi-function Button] (●●●) to select it. You will hear a beep and “Ready to pair.”

Changing the language

1. Press and hold the [Volume Down Button] (-) and the [Input Mode Button] (⊕) simultaneously until you hear the voice prompt for the first language option.
2. Press the [Volume Down Button] (-) or [Volume Up Button] (+) to scroll through available languages.
3. When you hear your language preference, press and hold the [Multi-function Button] (●●●) until you hear a beep and “Connected to .”

Disabling voice prompts

Press and hold the [Volume Down Button] (-) and [Volume Up Button] (+) simultaneously until you hear “Voice prompts off.”

Note: Repeat this action to re-enable voice prompts.

Bluetooth® Technology

Bluetooth® wireless technology lets you stream music from mobile devices such as smartphones, tablets, and computers. Before you can stream music, you must pair the device with your speaker.

Choosing your pairing method

You can pair your device with your speaker using Bluetooth wireless technology or Near Field Communication (NFC). You can also use the Bose® Connect app to pair your device (see page 10).

What is NFC?

NFC is a technology that enables mobile devices to establish wireless communication by simply tapping the devices together. Refer to your device owner's guide to see if your model supports NFC.

Note: If your device supports Bluetooth pairing via NFC, you can use either pairing method.

Pairing your mobile device

When you power on your speaker for the first time, it automatically searches for your mobile device.

1. On your device, turn on the Bluetooth® feature. Tip: The Bluetooth feature is usually found in the Settings menu.
2. Select your Bose® Revolve SoundLink® speaker from the device list.

Once paired, you hear “Connected to ,” and the Bluetooth indicator glows solid white. Note: To pair an additional device, see page 20.

Pairing a mobile device with NFC

Note: When you power on your speaker for the first time, ensure a language is selected before pairing your mobile device with NFC.

1. Unlock your mobile device and turn on the Bluetooth® and NFC features. Refer to your device owner's guide for more information.
2. Tap and hold the NFC touchpoint on your device to the top center of your speaker. The target area is the Bose® logo. Your device may prompt you to accept pairing.

Once paired, you hear “Connected to ,” and the Bluetooth indicator glows solid white.

Pairing an additional mobile device

You can store up to eight paired mobile devices in the speaker pairing list.

• Press and hold the [Bluetooth Button] () until the Bluetooth indicator blinks blue, and you hear, “Ready to pair another device.” Pair your device to the speaker (see page 18).
• If your device supports pairing via NFC, see “Pairing a mobile device with NFC” on page 19.

Disconnecting a device

• Turn off the Bluetooth feature on your device.
• If your device supports pairing via NFC, tap and hold the NFC touchpoint on your device to the top center of your speaker. The target area is the Bose® logo.

Reconnecting a device

When powered on, your speaker tries to reconnect with the two most recently connected devices. Note: The devices must be within range and powered on.

If your device supports pairing via NFC, tap and hold the NFC touchpoint on your device to the top of your speaker. The target area is the Bose logo.

Managing Multiple Connections

You can store up to eight paired mobile devices in the speaker pairing list, and your speaker can be actively connected to two mobile devices at a time. Note: You can only play audio from one device at a time.

Identifying connected mobile devices

Press the [Bluetooth Button] () to hear which devices are currently connected.

Switching between two connected devices

1. Pause audio on your first device.
2. Play audio on your second device.

Connecting a previously paired device

1. Press the [Bluetooth Button] () to hear which device is currently connected.
2. Press the [Bluetooth Button] () within two seconds to connect to the next device in your speaker's pairing list.
3. Repeat until you hear the desired device name. You will hear a tone indicating the device is connecting.
4. Play audio on the connected device.

Clearing the speaker pairing list

1. Press and hold the [Bluetooth Button] () for 10 seconds, until you hear “Bluetooth® device list cleared. Ready to pair.” All devices are cleared, and your speaker is ready to pair a new device.
2. Delete your speaker from the Bluetooth list on your device.

Using the Bose® Connect app

You can also easily manage multiple connected devices using the Bose® Connect app (see page 10).

Wired Connections

You can connect the audio output of a smartphone, tablet, computer, or other mobile device to the AUX connector or micro-B USB connector.

Connect the 3.5mm stereo cable

The AUX connector accepts a 3.5 mm stereo cable plug (not provided).

1. Using a 3.5 mm stereo cable, connect your mobile device to the AUX connector on your speaker.
2. Press the [Power Button] (⏻) on your speaker.
3. Press and release the [Input Mode Button] (⊕) until you hear “AUX audio.”

Connect the USB cable

1. Using the USB cable, connect your device to the micro-B USB connector on your speaker.
2. Press the [Power Button] (⏻) on your speaker.
3. Press and release the [Input Mode Button] (⊕) until you hear “USB audio.”

Operating on Battery Power

Battery protection mode

When your speaker is unplugged and unused for more than three days with a remaining charge of less than 10 percent, it enters battery protection mode to preserve battery power. To reactivate your speaker, connect it to AC (mains) power.

When not in use, store your speaker in a cool place.

CAUTION: Do not store your speaker for extended periods when fully charged or when the battery indicator glows red.

Auto-off setting

Your speaker powers off after 30 minutes of inactivity (no sound coming from your speaker) while using the following connections and power sources:

• AUX connection operating on battery or AC (mains) power.
• Bluetooth® connection operating on battery power.

Disabling auto-off

1. Press and hold the [Volume Up Button] (+) and the [Input Mode Button] (⊕) simultaneously. You will hear “Auto-off disabled.”
2. Repeat this action to re-enable the auto-off feature.

Status Indicators

The top of the speaker has a series of indicators that glow according to system state.

Indicator Locations:

• [Battery Indicator]: Located near the power button.
• [Bluetooth® Indicator]: Located near the Bluetooth button.
• [Input Indicator]: Located near the Input mode button.

Battery indicator

Shows the battery charge level. Each time you power on your speaker, the battery indicator displays the charge level for two seconds, and a voice prompt announces the battery charge level.

To check the battery charge level, press and hold the [Power Button] (⏻) for three seconds while checking the indicator.

Note: Battery performance varies with content played and volume level. In typical use, the speaker battery lasts up to 12 hours.

Bluetooth® indicator

Shows the connection status of a mobile device.

Input indicator

Shows the connection status of a device connected with an AUX or micro-B USB cable.

For more information on using a cable to connect a device, see page 22.

Pairing Bose® Speakers Together

You can pair your Bose® speakers together to play in Party mode (speakers play in unison) or Stereo mode (left and right speakers play separately) using the Bose Connect app (recommended) or the speakers' control buttons. Refer to your Bose owner's guide to determine if your secondary speaker supports these modes.

Pairing the speakers using the Bose® Connect app (recommended)

For more information, download the Bose Connect app.

Pairing the speakers manually

If you are unable to access the Bose Connect app, follow the instructions below.

Party mode

1. Make sure both speakers are powered on.
2. Ensure a speaker is connected to your mobile device.
3. On the speaker connected to your device, press and hold the [Bluetooth Button] () and the [Volume Up Button] (+) simultaneously.
4. Release the buttons when you hear “Press the Bluetooth and volume down buttons simultaneously on a second Bose device.”
5. On the other speaker, press and hold the [Bluetooth Button] () and the [Volume Down Button] (-) simultaneously.
6. Release the buttons when the speaker emits a tone. After 10 seconds, you will hear “Party mode” from both speakers simultaneously. Party mode is enabled, allowing you to play audio in unison.
7. For optimal experience, position your speakers in the same room or outdoor area with no obstructions between them.

Note: Performance may vary based on mobile device, distance, and environmental factors.

Stereo mode

1. Configure your speakers for Party mode (see page 26).
2. On one speaker, press the [Bluetooth Button] () and the [Volume Up Button] (+) simultaneously.
3. Release the buttons when you hear “Stereo mode.” You will hear “Left” from the left speaker and “Right” from the right speaker. Stereo mode is enabled, allowing you to play audio in stereo.

For an optimal experience, position your speakers:

• In the same room or outdoor area.
• Within 10 feet of each other, free from obstructions.
• So that your distance to each speaker is equal.

Note: Performance may vary based on mobile device, distance, and environmental factors.

Switching between Party mode and Stereo mode

On either speaker, press the [Bluetooth Button] () and the [Volume Up Button] (+) simultaneously.

Disabling Party mode or Stereo mode

Do one of the following on either speaker:

• Press and hold the [Bluetooth Button] () until you hear “Bose speakers unlinked.”
• Press and hold the [Multi-function Button] (●●●) and the [Volume Up Button] (+) simultaneously until you hear “Bose speakers unlinked.”
• Press the [Power Button] (⏻) to power off the speaker.

Care and Maintenance

Cleaning

• Clean the surface of the speaker with a soft, damp cloth (water only).
• Do not use any sprays near the speaker. Do not use solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives.
• Do not allow liquids to spill into any openings.

Customer service

For additional help using your speaker:

• Visit global.Bose.com/Support/SLR.
• Contact Bose® customer service. Refer to the contact sheet in the carton.

Limited warranty

Your speaker is covered by a limited warranty. Visit global.Bose.com/warranty for details.

To register your product, visit global.Bose.com/register for instructions. Failure to register will not affect your limited warranty rights.

Technical information

• Input Voltage: 5V
• Input Current: 1.6A

Troubleshooting

If you experience problems with your Bluetooth® speaker:

• Check the battery indicator (see page 25). Charge your speaker if necessary.
• Make sure all cables are securely attached.
• Check the state of status indicators (see page 25).
• Place your speaker according to placement guidelines (see page 12).
• Make sure your mobile device supports Bluetooth or pairing via NFC technology (see page 17).

If you cannot resolve your issue, see the table below for common symptoms and solutions. If you are unable to resolve your issue, contact Bose® customer service.

Common solutions

Resetting your speaker

Factory reset clears paired mobile devices and language settings from your speaker and returns it to the original factory settings.

1. Power on your speaker.
2. Press and hold the [Power Button] (⏻) for 10 seconds. The speaker powers off.
3. Press the [Power Button] (⏻). The Bluetooth® indicator glows blue, and you hear a voice prompt to select a language (see page 16).